The following article is Open access

Preparation of Barium Titanate/Strontium Titanate Multilayer Complex Nanoparticles using Nanocube Substrates

, , , , , , and

Published under licence by IOP Publishing Ltd
, , Citation Takayuki Goto et al 2011 IOP Conf. Ser.: Mater. Sci. Eng. 18 092030 DOI 10.1088/1757-899X/18/9/092030

Download Article PDF

Article metrics

446 Total downloads

Share this article

Author affiliations

1 Material Science and Technology, Interdisciplinary Graduate School of Medical and Engineering, University of Yamanashi, 4-4-37 takeda, Kofu, Yamanashi 400-8510, Japan

2 Department of Physical Science, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8526, Japan 1Material Science and Technology, Interdisciplinary

3 National Institute of Advanced Industrial Science and Technology, 2217-14 hayashi-cho takamatsu kagawa 761-0395, Japan

4 TAIYO YUDEN CO.,LTD.,5607-2, Nakamuroda-machi, Takasaki-shi, Gunma 370-3347, Japan

Buy this article in print

Journal RSS
Sign up for new issue notifications
1757-899X/18/9/092030

Abstract

The conditions for barium titanate (BaTiO3, BT) nucleation and particle growth were investigated for preparation of the BT/strontium titanate (SrTiO3, ST) complex nanoparticles. The conditions with and without BT nucleation were clarified. Epitaxial growth of the BT layer on the ST substrate particles was studied using both conditions. The formation of the BT layer on the ST substrate particles was confirmed using the condition with BT nucleation.

Export citation and abstract BibTeX RIS

Previous article in issue
Next article in issue
Please wait… references are loading.
10.1088/1757-899X/18/9/092030