Abstract
Ultrasonic guided wave (GW) inspection is one of the non-destructive testing (NDT) techniques available for the engineering structures. Compared with other NDT techniques, guided waves can propagate a long distance with a relatively high sensitivity to defects in the structure. In order to increase the performance for pipe inspections to meet higher requirements under different conditions, the optimisation of piezoelectric transducer array design is still a need, as the technique is currently subject to a complex analysis due to wide number of guided wave modes generated. This can be done by optimising the transducer array design. In this paper, it is described an analytical mode of a set of piezoelectric transducer arrays upon torsional wave mode T(0,1) excitation in a tubular structure. The proposed analytical model for predicting signal propagation is validated by using finite element analysis in ABAQUS and three-dimensional laser vibrometer experiments for transducer array characterisations. The proposed analytical model works well and very fast for simulating transducer excitation and wave propagation along cylindrical structures. This will significantly reduce the complexity of guided wave analysis, enhancing effectively the structural health of structures and subsequently reducing the industry maintenance cost.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.