Corrigendum: Linear magnetoconductivity in an intrinsic topological Weyl semimetal (2016 New. J. Phys. 18 053039)

Searching for the signature of the violation of chiral charge conservation in solids has inspired a growing passion for the magneto-transport in topological semimetals. One of the open questions is how the conductivity depends on magnetic ﬁ elds in a semimetal phase when the Fermi energy crosses the Weyl nodes. Here, we study both the longitudinal and transverse magnetoconductivity of a topological Weyl semimetal near the Weyl nodes with the help of a two-node model that includes all the topological semimetal properties. In the semimetal phase, the Fermi energy crosses only the 0th Landau bands in magnetic ﬁ elds. For a ﬁ nite potential range of impurities, it is found that both the longitudinal and transverse magnetoconductivity are positive and linear at the Weyl nodes, leading to an anisotropic and negative magnetoresistivity. The longitudinal magnetoconductivity depends on the potential range of impurities. The longitudinal conductivity remains ﬁ nite at zero ﬁ eld, even though the density of states vanishes at the Weyl nodes. This work establishes a relation between the linear magnetoconductivity and the intrinsic topological Weyl semimetal phase.

Earlier theories on the longitudinal magnetoconductivity arrived at various results [36][37][38][39][40][41][42][43]. In the semiclassical limit, where the Landau levels are not well formed, a positive B 2 magnetoconductivity was predicted [36,37], and has recently been under intensive experimental investigation [44][45][46][47][48][49][50][51]. In the semiclassical approaches, the Fermi energy should overwhelm the relaxation rate, not exactly at the Weyl nodes. The B 2 magnetoconductivity is also obtained by modeling the disorder as long-range charged impurities in the quantum limit [41]. In the scenario similar to that proposed by Nielsen and Ninomiya, different results have been obtained so far, depending on models and treatments [37][38][39][40][41]. Literally, a semimetal must have a Fermi energy crossing the Weyl nodes. Nevertheless, little attention is paid to the magnetoconduction in the exact semimetal phase. More importantly, the Weyl nodes always appear in pairs. The intrinsic connection of the Weyl nodes and the inter-node scattering are two factors to affect the transport properties because the chiral anomaly occurs between two Weyl nodes.
In this work, we start with a two-node model to investigate both the longitudinal and transverse magnetoconductivity of a Weyl semimetal near the Weyl nodes. The model describes a pair of Weyl nodes, and is solvable in the presence of magnetic fields. The scattering potential of the impurities is modeled by using a random Gaussian potential, in which the range of potential may vary in realistic materials. As long as the potential range is finite, we show that the longitudinal magnetoconductivity is positive and linear in magnetic field, giving rises to a negative magnetoresistance. As the field goes to zero, we have a finite minimum conductivity, even though the density of states (DOS) vanishes at the Weyl nodes. In the transverse magnetoconductivity, we find a crossover from linear-B dependence in the short-range potential limit to B 1 dependence in the long-range potential limit.
The paper is organized as follows. We first introduce the two-node model and present the solution of the Fermi arcs in section 2. We then discuss the magnetic field-induced DOS and chiral anomaly in section 3. In sections 4 and 5, the formulas and analysis of the longitudinal and transverse magnetoconductivities in the presence of the random Gaussian potential are given, respectively. We also discuss the paramagnetic Weyl semimetal in section 6. The conclusions are given in section 7. The detailed calculations are provided in appndix A-C.

Two-node model of Weyl semimetal and Fermi surfaces
We describe the topological semimetal with a two-node model [40], where s x y z , , are the Pauli matrices, x y z is the wave vector, and A, M and k c are model parameters. The model is in the topological semimetal phase and describes a pair of 3D gapless Dirac cones, with two Weyl nodes located at . The topological properties of the twonode model can be examined by the Berry curvature, Chern number and Fermi arcs [40,52]. A topological semimetal has the k z -dependent topologically protected surface states for a specific k z between the two Weyl nodes. This is demonstrated by a non-zero Chern number as a function of k z , ( ) According to the bulk-edge correspondence, there a exist surface (or edge) states around the surfaces parallel to theẑ direction. The solution of the surface states can be found from the two-node model explicitly by following the solution to the two-dimensional modified Dirac equation that describes the quantized anomalous/spin Hall effects [53].
Suppose we have a semi-infinite system in the half plane  y 0 with open boundary conditions and with translational symmetry along thex andẑ directions, as shown by figure 1(d). k x and k z are still good quantum numbers but k y is replaced = - ¶ k i y y in the Hamiltonian (1). We can assume a trial wavefunction for each set of k k , The general wavefunction in theŷ direction can then be written as a superposition of the spinor states where the eigen-energy E as well the coefficients ab C are to be find from the boundary conditions. We now apply the open boundary conditions: . According to equation (4), this condition can only be satisfied in two cases: , 0(Note that l l = to determine + C 1 and + C 2 . Substituting equations (5) and (6) into equation (8), respectively, and considering l l ¹ 1 2 , we arrive at On the other hand, according to equation (4), we have Here we assume > A 0 without loss of generality. Putting this result into equation (9), the dispersion of the surface states is finally given by The corresponding wavefunction can be simplified as where C is a normalization factor and | | ( 2 2 . At the surface of y = 0, the surface states are eigenstates of s x with a uniform effective velocity, Thus they are chiral surface states around the surface parallel with theẑ direction. Also in both cases (i) and (ii), we have l l > 0 1 2 and henceforth D > 0 k . Therefore the solution of Fermi surface states is restricted inside a circle defined by as shown in figure 2 (see appendix A for the general formulas of the DOS). When the Fermi energy locates right at the Weyl nodes, the DOS is exactly zero. At this exact semimetal phase, it is expected to have exotic electronic transports at zero temperature. It is found that a finite DOS can be generated by a magnetic field B along the direction that connects the two Weyl nodes, i.e., aẑ-direction magnetic field in the present work. Thê z-direction magnetic field can split the Dirac cones into a bundle of 1D bands of Landau levels dispersing with k z [19,40,54], as shown in figure 2. Figure 2 shows how the DOS in the absence of the magnetic field evolves into a set of diverging peaks in the presence of the magnetic field. The divergence is due to the van Hove singularity at the band edges of the 1D Landau bands.
In the presence of a magnetic field in theẑ direction, the energies of electrons form a set of Landau bands dispersing with k z as following [40]  ( ) is the magnetic length. Each Landau band has the Landau degeneracy in a unit area in the x-y plane. In the magnetic field, the DOS near the Weyl nodes is given by which is contributed by the 0th Landau bands. At the Weyl nodes, the DOS reduces to , which grows linearly with the Landau degeneracy | | = N eB h L and hence the magnetic field B. This resulting DOS leads to a semimetal to metal transition, which is under intensive investigation in the context of the disorder-induced DOS [55][56][57][58][59], instead of in the presence of magnetic field.
In theẑ-direction field, the Fermi energy crosses with the 0th Landau bands at k c and -k c , where the Fermi velocities are opposite, i.e., . This chiral property of the 0th bands is exactly the scenario required in Nielsen and Ninomiya's proposal for the chiral anomaly [1]. As an electric field is applied along the Weyl node direction, the changing rates of charge carriers are near the two Weyl nodes at =  k k z c , respectively. Thus charges can be pumped from near k c to -k c , literally leading to the nonconservation of chiral charge, i.e., the chiral anomaly [31]. Later, we will focus on the electronic transport in this situation when the chiral anomaly happens. In the following discussions, we will constrain to the case near the Weyl nodes, i.e., the Fermi energy is located between two Landau bands of  1 , and at very low temperatures,

Longitudinal magnetoconductivity
At sufficiently low temperatures, i.e., , and not far away from the Weyl nodes, the electronic transport can be effectively conducted by the 0th bands of Landau levels. When the electric and magnetic fields are in parallel with each other, the changing rate of density of charge carriers near one node is maximal according to the picture of chiral anomaly. In this case, the semiclassical conductivity of the 0th Landau bands can be found with the help of the standard Green function formulism [40]. Alternatively, it can be simply figured out by using the Einstein relation s = e N D, where the DOS can be found as the Landau degeneracy times the DOS of onedimensional systems, i.e., is the Fermi wave number. For the scattering among the states on the Fermi surface of the 0th Landau bands, the transport time can be found as represents the scattering matrix elements and á ñ ... means the impurity average (see appendix C for details).
The transport time t k tr 0, F is sensitive to the scattering potential in materials. One of the convenient choices is the random Gaussian potential where u i measures the scattering strength of a randomly distributed impurity at R i , and d is a parameter that determines the range of the scattering potential. The Gaussian potential allows us to study the effect of the potential range in a controllable way, which we find it crucial in the present study. Now we have two characteristic lengths, the potential range d and the magnetic length ℓ B , which define two regimes, the longrange potential regime ℓ  d B and the short-range potential limit ℓ  d B . Note that, for a given d in realistic materials, varying the magnetic field alone can cross between the two regimes. Empirically, the magnetic length ℓ B = 25.6 nm / | | B with B in Tesla. In the strong-field limit, e.g., > B 10 T, the magnetic length ℓ B becomes less than 10 nm, it is reasonable to regard smooth fluctuations in materials as long-range.
With the random Gaussian potential, we can find the transport time as well as the conductivity. In particular, at the Weyl nodes the transport time is obtained as (see appendix B.1 for details) and hence the longitudinal conductivity measures the strength of the scattering and = V L L L x y z is the volume of the system. L x y z , , are the sizes of the system along thex,ŷ andẑ directions, respectively. This conductivity is generated by the inter-node scattering with a momentum transfer of 2k c . As the magnetic field goes to zero, the magnetic length diverges and ℓ  d 0

B
, and equation (22) gives a minimum conductivity even though the DOS vanishes at the Weyl nodes at zero magnetic field. A similar result was found in the absence of the Landau levels [58].
According to d, we have two cases. (1) In the short-range limit, d = 0, then s zz does not depend on the magnetic field, giving a zero magnetoconductivity, which recovers the result for the delta potential [40,41]. (2) As long as the potential range is finite, i.e., > d 0, we can have a magnetoconductivity. Using equation (22), 2 . Thus the magnetoconductivity is given by the range of impurity potential, and independent of the model parameters. This means that we have a positive linearẑ-direction magnetoconductivity for the Weyl semimetal. A finite carrier density n 0 can drive the system away from the Weyl nodes, then k c in equation (22) is to be replaced by 0 . The finite n 0 can vary the linear-B dependence, but a strong magnetic field can always squeeze the Fermi energy to k c , and recover the linear magnetoconductivity.
A linear-B magnetoconductivity arising from the Landau degeneracy has been obtained before [37,39], based on the assumption that the transport time and Fermi velocity are constant. However, in the present case, we have taken into account the magnetic field dependence of the transport time, and thus the B-linear magnetoconductivity here has a different mechanism as a result of the interplay of the Landau degeneracy and impurity scattering. Also, in the presence of the charged impurities, a B 2 magnetoconductivity can be found in the quantum limit [41]. A B 2 magnetoconductivity can also be found in the semiclassical limit [36,37].

Transverse magnetoconductivity
When electric and magnetic fields are perpendicular to each other, the changing rate of density of charge carriers near each node vanishes. In this case, because the Landau bands in theẑ-direction magnetic field only disperse with k z , the effective velocity along thex direction . The leading-orderx-direction conductivity arises from the inter-band velocity and the scatterings between the 0th bands with the bands of  1 , which are higher-order perturbation processes. Thus the transverse conductivity is usually much smaller than the longitudinal conductivity.
When the Fermi energy crosses only the 0th bands, the leading-order conductivity is given by [60] ( ) is the retarded Green's function of electrons in the 0th bands, The lifetimes due to the random Gaussian potential can be calculated by using the Born approximation, After lengthy but straightforward calculations, they can be obtained as (see appendix B.2 for details) The substitutions of equations (26) and (27) for When the Fermi energy is at the Weyl node, the transverse conductivity s xx at the Weyl nodes is given by ) and  » 1 4 in the weak-field limit (ℓ  M A B ). We choose the value of V imp so that the band broadening is always much weaker than the spacing between the 0th and 1st Landau bands for an arbitrary magnetic field. It is safe to assume that only the 0th Landau band contributes to the conductivity at half filling. There are three cases as shown in figures 3 (d)-(f). At d = 0, s xx reduces to the result for the delta potential and s µ B xx , a linear magnetoconductivity as s zz , but much smaller [40]. In the long-range potential limit ℓ  d B , we have s~B 1 xx , which gives a negative magnetoconductivity. For a finite potential range d, we would have a crossover of s xx from B-linear to B 1 dependence. Alternatively, as shown in figure 3 (e), for a finite d (=5 nm) comparable to the magnetic length ℓ B , we have a crossover of s xx from a linear-B dependence in weak fields to a B 1 dependence in strong fields. While at d = 0 and ℓ  d B , we have the two limits as shown in figures 3 (d) and (f), respectively. For shorter d, a larger critical magnetic field for the crossover is needed. Figure 3 also shows that the conductivity is larger for shorter d, so the B 1 transverse magnetoconductivity in the long-range limit may not survive when there are additional short-range scatters.
In particular, in figure 3 (f), s µ B 1 xx in the long-range potential limit. In the field perpendicular to the x y plane, there is also a Hall conductivity

Paramagnetic Weyl semimetal
The existence of the non-zero Chern number or chiral surface states indicates the time reversal symmetry breaking in the two-node model in equation (1). Correspondingly a quantum anomalous Hall conductance appears. To have a paramagnetic Weyl semimetal, we have to introduce a time reversal counterpart for the two Weyl nodes in equation (1). A straightforward extension is as follows In a weak magnetic field, the magnetoconductivity is also linear in magnetic field, as that for Weyl semimetal in equation (1). However, for a strong field, the strong field dependent Fermi energy will give a different field dependence of conductivity as the two 0th bands shift away from each other as increasing field. Finally it is worthy pointing out that this kind of semimetals is different from a simple Dirac semimetal described by a pair of degenerate Dirac cones,   s vk (e.g., at the phase transition point between a 3D topological insulator and trivial insulator), in which there does not exist the surface states as the two nodes are not separated in momentum space and the model is topologically marginal. Also, the Zeeman effect may also contribute to a linear contribution to the magnetoconductivity [63]. But its sign depends on the g-factor of sample and usually its magnetoconductivity is negative, opposite to that in this work.

Conclusions and discussion
The key conclusion of the present work is the positive and linear magnetoconductivity of Weyl semimetals near the Weyl nodes. The Fermi energy is assumed to cross only the 0th Landau bands of the semimetal at low temperatures (  w E F and  w k T B ). The magnetoconductivity depends on the types of scattering potentials, in which the potential range is a characteristic parameter. Our conclusion is different from the theoretical predictions of the positive B 2 magnetoconductivity in several previous works [36,37], because where higher Fermi energies (  E k T F B ) and   wt k 0,tr F were assumed, therefore there were many more Landau bands on the Fermi surface. Recently, a positive longitudinal magnetoconductivity has been observed in several different candidates of topological semimetal [44][45][46][47][48][49][50][51], and was claimed to be related to the chiral anomaly. We believe that the linear term is one of the indispensable ingredients in the formula of the magnetoconductivity in the intrinsic Weyl semimetal phase. When more Landau levels come into play as the Fermi energy is shifted from near the Weyl nodes, the magnetoconductivity is expected to deviate from linear. The result of the magnetoconductivity is based on the Born approximation. When the magnetic length becomes much shorter than the range of the disorder potential, electrons may be scattered by the same impurity for multiple times. The Born approximation contains the correlation of two scattering events by the same impurity [64]. In this situation, the validity of the Born approximation was questioned in two dimensions [65,66]. In three dimensions, it is still unclear whether the correlation of two scattering events in the Born approximation is the building block for the multiple scattering under extremely strong magnetic fields [62,67]. So far, theories in three dimensions employ the Born approximation, e.g., the quantum linear magnetoresistance [61]. The treatment beyond the Born approximation will be a challenging topic for threedimensional systems under extremely strong magnetic fields. Mk If < A M k 2 c 2 2 2 , the DOS is instead given by are positive, respectively.
In the quantum limit, only the n = 0 term is retained and N(E) reduces to  The substitution of the Fourier transform of the potential . Performing the integral in polar coordinates and we finally obtain x F x z and then using In the strong-field limit ℓ  0 where ( ) -U r R i i denotes the scattering potential of a single impurity at the position R i . Theŷ-direction wavefunction ( ) j n y k x is given in equation (C.11). Fourier transforming the potential by using