A simple model for the falling cat problem

We introduce a specific four-particle, four degree-of-freedom model and calculate the rotation that can be achieved by purely internal torques and forces, keeping the total angular momentum zero. We argue that the model qualitatively explains much of the ability of a cat to land on its feet even though released from rest upside down.


Introduction
We are interested in the ability of a cat to always land on its feet when dropped from rest upside down. It has been well known for a long time that non-rigid bodies can perform zero angular momentum turns. Some general references are [1][2][3]. The problem of the falling cat has interested many investigators since the time of Maxwell. Historical references can be found in Kane [4] and in Fredrickson [5]. The purpose here is to present a model that makes a quantitative treatment of the problem accessible to undergraduates.
To study the cat we introduce a simple model which we believe catches the essentials of the kinematics of this phenomenon. This is not uncontroversial, however. There are in fact two schools of thought in the literature regarding the kinematic mechanism of the cat turn.
One is the 'legs in-legs out' sequence with a relative twist of the front and hind legs. This is the mechanism described by our model. It is also used in text book explanations (e.g. Walker [6]) and it has been studied by Kaufman [7] who, however, argues that this mechanism is not sufficient to explain the 180°turn. Other studies of this general type can be found in [8][9][10][11].
The other school claims that tilted rotating cylinders (called 'tuck and turn' by Kaufman [7]) is the main mechanism. This model seems to be the most popular nowadays and it is advocated by Kane [4], Edwards [12], Galli [13], Iwai et al [14] and Wikipedia [15]. There is a YouTube video of the motion of this model [16]. One notes that in these models the front and hind legs of the cat remain parallel (no twist).
There are many photograph sequences (e.g. in [4,5]) and You Tube videos [17,18] of falling cats. The most conspicuous feature of these is a considerable twist of the front relative to the hind of the cat. Their relative angle appears to approach 180°(π radians). Since this feature is not part of the tilted cylinder models it seems that the 'legs in-legs out' models can not be totally wrong.
Various authors discuss the problem in terms of advanced concepts such as gauge theories [3] or non-holonomic systems and geometric phases [19]. Others are interested in the ability of the cat to survive falls from large heights and their terminal velocity [18,20]. Here we will focus on the 180°turn and describe it in the simplest terms possible.
We first present our model system. The extension of the legs from the horizontal axis through the centre of mass and their angles of rotation about this axis are the primary variables. The two angles are then replaced by the relative, or twist, or torsion, angle ψ and the mean, or average, or rotation, angle j. A differential equation giving the (zero angular momentum) rotation angle as a function of the twist and leg extensions is the derived. It is shown that the system can rotate 180°by a single twist of 180°.

The model system
The model is a four-particle system, shown in figures 1 and 2. It consists of an axle of length L. About the end points two perpendicular rods can rotate. These have particles attached at the end points, one heavy of mass M and one light of mass m. Both rods have their centres of mass on the axle, so if the distance to m from the axle is ρ, the distance to M is μρ with μ=m/M. On each rod there is one heavier particle with mass M and one lighter with mass m. The centres of mass G 1 and G 2 of the rods are on an axle of length L connecting them and the centre of mass G of the system is at the midpoint of this axle. The two rods can rotate about the axle. The particles are represented by spheres and those further from the viewer are shown as smaller. One rod represents the front legs of the cat, the other the hind legs.
We will assume that the relative angle of the two rods and the length of the rods can be changed by means of internal torques and forces, while there is no external torque acting on the system. The centres of mass of the rods will then remain on the axle. The only external forces are the weights of the particles and these can be represented by a resultant acting downwards at the common centre of mass G. In the freely falling reference frame there are no external forces acting. We describe the system using the angles j 1 and j 2 shown in figure 2. The distances of the lighter masses to the axis through the centres of mass are denoted ρ 1 and ρ 2 respectively. There are thus four degrees-of-freedom and the corresponding coordinates are j 1 , j 2 , ρ 1 , ρ 2 .

Model angular momentum
We now introduce cylindrical (polar) coordinates ρ, j, and z and corresponding unit vectors The angular momentum of the system with respect to the centre of mass has four contributions and these are Straightforward calculation simply gives m r j r j since all other terms cancel.

Two new variables
Assume now that the there is no external torque and that angular momentum is zero initially. We then have the simple relationship Let us define the mean angular velocity j and relative angular velocity ẏ through The zero angular momentum equation ( From this equation we see that if y = 0, so is j . It is also clear that if ρ 1 =ρ 2 then j = 0. There will thus only be a mean angular velocity if both r r ¹ 1 2 and y 1 0.

Differential equation of rotation
Equation (14) gives the mean angular velocity of our model system We put r r r r º - since only this combination of length changes will affect the mean angular velocity. This gives us the differential equation We now wish to find functions f (t), ψ(t) that are such that after some time T, the duration of the fall, the mean angle j has changed by π (180°), To model the cat the functions f (t), ψ(t), and ẏ ( ) t should all start and end with zero values y y y y This corresponds to the cat starting and ending its fall with equally long front and hind legs, which are parallel and non-rotating. To model the cat the relative angle ψ(t) should change from zero to some maximum value and back to zero since this is the what photos and videos indicate. This means that the function ẏ ( ) t changes sign once. For the system to keep rotating in the same direction the function f (t) must therefore change sign at the same time.

Two solutions
The simplest, and probably optimal, solution of this kind is given by choosing piecewise constant functions f (t) and ẏ ( ) t , with f (t) discontinuous. It is given by, The total rotation angle j ( ) T will be π if ω=2π/T. The maximum relative (twist) angle is then ψ(T/2)=π. The solution is illustrated to the left in figure 3 and in figure 4. There are, obviously, some problems with this solution, also apart from requiring infinite accelerations and neglecting the time taken to extend and retract the rods (legs). It is a bit dubious to put one of the lengths ρ k equal to zero since then the relative angle becomes undefined. This, however, can be fixed rather easily by putting the shorter length to 1/10 times the longer, instead of putting it to zero. The values of f (t) will then only change by one per cent, from those given in (20).