Abstract
This paper reports the fabrication of coils for micro-magnetic devices on silicon using thick photoresists commonly used in the manufacture of microelectromechanical systems. A comparison of three photoresists, EPON SU-8, AZ 4562 and AZ 9260, is presented for the fabrication of high aspect ratio conductors. With a thickness of 81 μm, aspect ratios of 6:1 are obtained using the AZ 9260 photoresist. RF inductors and micro-transformers for power conversion applications are fabricated using this technology. The quality factor of the RF inductors shows maximum values of 23 at 0.4 GHz. Very good measurement is also obtained with the micro-transformers: the resistance of the electroplated copper windings is 0.3 Ω up to 2 MHz.