Abstract
A review of experimental results obtained in JET D-T plasmas is presented. In discussing the underlying physics, results previously obtained on tokamak fusion test reactor (TFTR) are also taken into account. In JET, the maximum fusion power output 
of 16.1 MW has been obtained in an edge localized mode (ELM)-free hot-ion H-mode featuring an edge confinement barrier in a single-null divertor plasma with a 
where 
is the total input power to torus. A steady-state H-mode discharge, with plasma shape and safety factor q similar to that of ITER, produced 4 MW for 5 s (22 MJ). The steady-state results extrapolate well to ignition with ITER parameters using the normalized plasma pressure 
achieved on JET. Also, the advanced tokamak regime using optimized magnetic shear configuration featuring an internal transport barrier produced 8.2 MW of fusion power. With regards to reactor physics issues, a clear identification of electron heating by fusion born 
-particles has been made both in JET and TFTR. The JET experiments show that the H-mode threshold power has approximately an inverse isotopic mass dependence and that it does not depend on the method of auxiliary heating. The global energy confinement time in the TFTR D-T supershot regime scales as 
but in the JET H-modes, it is found to be practically independent of isotopic mass 
where A is the atomic mass of the hydrogenic species. In JET, the plasma core and the edge appear to have different underlying confinement physics, the former follows the gyro-Bohm transport 
model whereas the edge pedestal energy scales as 
. The maximum edge pressure in H-modes is analysed in relation to the ion poloidal Larmor radius at the edge. The fast ions driven by neutral beam injections (NBI) or ion cyclotron resonance heating (ICRH) could play an important role in setting the width of the edge pedestal. The thermal ELMy H-mode confinement both in D or T gas fuelled plasmas decreases significantly when the plasma density exceeds 0.75 of the Greenwald 
limit and the maximum density achieved is 
. The ICRH scenarios for a reactor have been evaluated. For example, 
minority in 50:50 D:T and tritium-dominated plasmas showed strong bulk ion heating leading to ion temperatures up to 13 keV with ICRH alone. Deuterium-minority ion cyclotron heating in tritium plasmas at a power level of 6 MW produced steady-state record values of 
for more than 2.5 s. Finally, the on-site closed-cycle tritium reprocessing plant and remote handling tools at JET have been used routinely and provided an integrated demonstration of safe and reliable operations of a tokamak device in reactor-relevant conditions.
Export citation and abstract BibTeX RIS