Visible light induced cooperative carbonylation and (hetero)aryl migration: synthesis of multi-carbonyl compounds

Carbonylative transformation represents one of the most straightforward procedures for the synthesis of carbonyl-containing compounds. However, the carbonylative procedure toward 1,4-diketones is still limited which are key moieties with potent applications in various areas. Herein, we report a new strategy for the synthesis of multi-carbonyl compounds containing a 1,4-diketone skeleton through remote heteroaryl migration of traditionally restricted 1,3-migratory substrates utilizing carbon monoxide (CO) as the C1 synthon and diazonium compounds as the starting material.


Introduction
Carbonyl-containing compounds possess versatile reactive sites and are privileged building blocks for the construction of a wide range of useful chemicals.Among them, 1,4-diketones are widely used as synthetic precursors for the assembly of various bioactive compounds, including bioactive molecules such as pyrroles, furans, thiophenes, diols, diamines, cyclopentenones, etc. 1 Many natural products also contain a 1,4-diketone skeleton.Examples include herquline A, 2 amphidinolide F 3 and maoecrystal V (Fig. 1(a)). 4Due to the recognized importance of the carbonyl group, it is therefore particularly important to develop new methods to produce these valuable multi-carbonyl compounds in synthetic chemistry.
Compared with using complexed molecules for constructing challenging natural product skeletons, the use of simple molecules is more attractive in synthetic chemistry based on their readily availability.Carbon monoxide (CO) serves as a costeffective and readily available C1 source, making it a signicant synthon in carbonylation reactions. 5Radical mediated carbonylation is attracting growing interest because of its versatility for radical generation and relatively mild reaction conditions.Over the past few decades, there has been a systematic investigation into the radical-promoted difunctionalization reactions of unactivated alkenes, including remote functional group migration. 6Since the rst report of radical-mediated aryl migration by Wieland in 1911, 7 migration reactions have been extensively studied but are mainly limited to migration between two carbon atoms.In 1995, Kim et al. reported the migration of 1,2-aryl groups from carbon to N-centered radicals derived from azido groups. 8This type of reaction was subsequently enriched by Shi and Nevado et al. 9 Migration reactions from the carbon center to the oxygen center and from the carbon center to carboxylated radicals have also developed over time. 10However, migration from carbon to acyl radicals has not been well achieved and needs to be explored and investigated (Fig. 1(b)).
Due to their high reactivity and wide range of applications, diazo compounds are highly regarded as carbene precursors under transition metal catalysis or direct light irradiation. 11In contrast, relevant research studies on the reactions of diazo compounds as radical precursors were less reported. 12We envision that the conversion of diazo compounds into carbon radicals through the proton-coupled electron transfer process 13 might be a solution.Additionally, 1,3-migrating substrates are limited for remote functional group migration.Herein, we describe a mild and efficient protocol for the heteroaromatic group migration and carbonylation of unactivated alkenes with carbon monoxide and a variety of useful multi-carbonyl compounds containing a 1,4-dicarbonyl skeleton were prepared in good yields in general (Fig. 1(c)).

Results and discussion
To realise this transformation, we studied the reaction using dimethyl 2-diazomalonate (1a) and benzothiazole-substituted tertiary alcohol (2a) as model substrates for the heteroaromatic group migration and carbonylation in the presence of 1.0 mol% fac-Ir(ppy) 3 .Aer exposure to CO at 40 bar with blue LEDs in N,N-dimethylformamide (DMF) at room temperature for 24 hours, the desired product 3a was obtained in 72% yield (Table 1, entry 1).Control reactions revealed that omission of the photocatalyst fac-Ir(ppy) 3 , or light, gave very low product 3a formation.Moreover, replacing fac-Ir(ppy) 3 with 4CzIPN or changing the power of the lamp resulted in a decrease in the yield of the desired product 3a.Diverse solvents were examined for the reaction, and the desired product was identied, although the outcomes were found to be unsatisfactory (for details, please refer to the ESI † for more information).
Aer mastering the optimal conditions for the reaction, we began to examine the compatibility of this transformation with a series of different benzothiazole-substituted tertiary alcohols and dimethyl 2-diazomalonate (Fig. 2).The overall experimental results showed that the benzothiazole group preferentially migrated chemoselectively over the aryl group.When different electron-donating or electron-absorbing groups were used to replace the aryl group in the substrate, the carbonylated products were obtained in good yields with little variation in yields (3a-3g and 3n-3q).Surprisingly, halides, especially chlorides (3f), were compatible in this remote migration reaction, providing a basis for further modications of the substrate.By changing the substitution site on the benzene ring, we also tested the tolerance of the reaction to spatial effects, which proved to have no signicant effect on the reaction yields (3h-3j).When the aryl group is replaced by a double group, the target product can still be obtained in good yields (3k-3m).The tolerance of the reaction to aromatic heterocycles other than benzothiazole groups was then investigated.The migration of various substituted benzothiazoles proceeded smoothly, with electronic and spatial effects largely unaffected (3r-3t).In addition to substituted benzothiazoles, benzoxazoles and thiazoles, among others, also reacted smoothly and good yields were obtained (3u-3ab).Benzofuranyl and benzothiophene groups were slightly sensitive to reaction conditions and the established products were obtained in 44% yields (3ac-3ad).To our surprise, diaryl-substituted alcohols were also able to normalise the migration reaction.However, because of the migration efficiency, the target product was obtained in 36% yield (3ae).It's also worth mentioning that the reactions with 1-(benzo[d]thiazol-2-yl)-1-phenylpent-4-en-1-ol and 1-(benzo[d] thiazol-2-yl)-1-phenylprop-2-en-1-ol with diazo compound toward 1,5-and 1,3-aryl migration failed without the desired product being detectable.In the cases of 1-phenyl-1-(pyridin-2yl)but-3-en-1-ol and 1-(1-methyl-1H-indol-2-yl)-1-phenylbut-3en-1-ol, no targeted product could be detected.
In order to further expand the product diversity of the reaction, diazo compounds were tested subsequently and decreased conversion was observed in some cases (Fig. 3).Considering the reduced activity of the diazo compounds compared to dimethyl 2-diazomalonate, the reaction was slightly optimised with an appropriate extension of the reaction time.Various alkyl alcohol substituted diazo esters were tested rst and the results showed good compatibility (4a-4i).When the substituent group was a heterocycle, it showed sensitivity to the reaction and the target product could only be obtained in 36% yield (4g). Finally, we attempted to introduce various biomolecules into the reaction products and the corresponding products were obtained in moderate to good yields (4j-4n).Diazoacetylbenzene was also tested, but low yield was obtained.
To better understand how the migration reaction occurs, we performed several control experiments as shown in Fig. 4. The model reaction was inhibited when a radical scavenger was  added to the reaction under the standard conditions.In the presence of BHT (butylated hydroxytoluene), radical scavenging by-products were detected by GC-MS.The results of these radical quenching experiments suggest that the reaction may involve radical intermediates.
Additional control experiments were also carried out to obtain further mechanistic information.During the optimization of the reaction, it was found that the extra addition of H 2 O favored the conversion of diazonium compounds which promoted the reaction.To investigate the role of H 2 O, the experimental results were monitored by controlling the addition of H 2 O.When H 2 O was not present in the reaction system, the target product was obtained in 43% yield.Aer addition of 3 equivalents of D 2 O, the established product was obtained in a yield of 52% and 50% D was detected.The experimental results showed that the protons in the formation of carbon radicals from diazonium compounds partially originate from water in the reaction system.When carbon monoxide was not present in the system, the modelled reaction did not occur and only signicant amounts of by-products were detected.This indicates that carbon monoxide plays an important role in the reaction by acting as a linker type of promoter.
To further demonstrate the value of the synthetic method, the products generated were further transformed.1,4-Dicarbonyl compounds were used as synthetic building blocks for biologically active heterocycle preparation, and the corresponding pyrrole derivative 5 and thiophene derivative 6 were obtained in excellent yields using product 3a as a template substrate.Surprisingly, both products 5 and 6 showed excellent uorescence under 365 nm light, which may further expand their applicability.The ester group of product 4a can be easily hydrolysed to afford the carboxylic acid derivative 7.With the research on carboxylic acid derivatives in recent years, a number of decarboxylation halogenations, decarboxylation arylations, decarboxylation borylations, decarboxylation unsaturations, etc. can be obtained by modifying the carboxylic acid group.These expressed reaction advantages may have potential applications in the future for drug developments.Concerning large-scale synthesis, this method can be easily expanded by performing the reaction with several vials parallelly in the same autoclave which is even more stable with the reaction outcome.
Based on the experimental results and literature, 15 we proposed a possible reaction pathway for this transformation (Fig. 5).Initially, the diazonium compound was reduced using an excited state catalyst *fac-Ir(ppy) 3 and undergoes a PCET process to release nitrogen to obtain alkyl radical I. Addition of alkyl radical I to the unactivated olenic substrate 2a yields a new carbon radical intermediate II.At this point, the radical intermediate II can capture carbon monoxide under a carbon

Conclusions
In conclusion, we developed a new preparation strategy for multi-carbonyl compounds containing a 1,4-diketone skeleton.
The reaction proceeds via radical-mediated difunctionalisation of unactivated alkenes using carbon monoxide (CO) as the C1 linker.By this procedure, remote heteroaryl migration of traditionally restricted 1,3-migrating substrates has been successfully achieved utilizing carbon monoxide (CO) as the C1 synthon, providing a new pathway for the subsequent use and study of carbon monoxide.In the future, efforts on 1,3-migration, 1,5-migration and others should be made.

Table 1
Optimization of the reaction conditions a