5-Aminoisophthalate-based kojic acid-appended bis-1,2,3-triazole: a fluorescent chemosensor for Cu2+ sensing and in silico study

A new, easy-to-prepare, and highly selective fluorescent chemosensor, i.e., 5-aminoisophthalate-based kojic acid-appended bis-1,2,3-triazole, was synthesized from an alkyne of 5-aminoisophthalic acid and azido-kojic acid using Cu(i)-catalyzed click chemistry and then successfully characterized. The alkyne structure of 5-aminoisophthalic acid, 1, was supported by the single-crystal X-ray crystallographic data. The fluorescent probe 3 was found to be highly selective for Cu2+ ions supported by the Job's plot with a stoichiometric ligand : metal ratio of 2 : 1, exhibiting almost a two-fold enhancement in the emission intensity upon the addition of Cu2+ ions (0–25 μM) with a detection limit of 8.82 μM. A comparison with LODs from previously developed chemosensors for Cu2+ ions was also conducted. Reversibility analysis indicated that probe 3 could be used as both a reusable sensor and as a scavenger of copper ions. DFT calculations with the basis sets B3LYP/6-311G(d,p) and LanL2DZ were employed for geometrical optimizations of structures of the alkyne 1, azide 2, probe 3, and complex 3.Cu2+. Hirshfeld surface analysis revealed significant intermolecular interactions in compound 1. Additionally, molecular docking for the antimicrobial activity showed the better antibacterial efficacy of probe 3.


Introduction
In the realm of chemical and biological research, the development of innovative uorescent probes for the selective detection of metal ions and exploration of potential antimicrobial agents with desired characteristics have become paramount.Among these, exploring diverse heterocyclic scaffolds has attracted signicant attention owing to their versatile applications in various elds including medicinal chemistry and materials science. 1,2Due to their unique electronic and structural properties, triazoles, a class of ve-membered heterocyclic compounds, have emerged as intriguing candidates.Amongst the various uorescent chemosensors available, triazoles, obtained via CuAAC through a 'click' methodology, [3][4][5][6] which is considered the ideal synthetic route to form 5aminoisophthalate-based kojic acid-appended 1,4-disubstituted bis-1,2,3-triazole derived from natural compounds, offer unique advantages due to their biocompatibility and ecofriendly nature.][9][10] The application of the synthesized 5-aminoisophthalate-based kojic acidappended 1,4-disubstituted bis-1,2,3-triazole as a sensing platform for heavy and transition metal ions is of specic interest aer prior research in related uorescent and biologically signicant hybrid compounds. 11,12he signicant increase in the accumulation of metal ions beyond acceptable levels has underscored the urgent need to investigate effective and robust research substitutes for their immediate recognition, even at low concentrations. 13,14The focus on metal cation detection arises from their extensively documented harmful effects on terrestrial and aquatic ecosystems, 15,16 making their qualitative and quantitative identication imperative. 17As the third-most-common heavy metal ion in the human body, bivalent copper (Cu 2+ ) is an essential ion that plays several roles in biological processes.Functioning as a catalytic cofactor for metalloenzymes, 18 it plays a pivotal role in many critical physiological functions.However, an intricate balance of metal ions is crucial, as the dysregulation of Cu 2+ ions can lead to oxidative stress and associated health complications.Copper deciency in the human body is implicated in several serious conditions, such as Alzheimer's disease, 19,20 and Wilson's disease. 21

Synthesis of di(prop-2-yn-1-yl) 5-aminoisophthalate, 1
The alkyne synthesis was commenced by treating 5 mmol of 5aminoisophthalic acid with 11 mmol propargyl bromide in 10 mL of DMF, utilizing 25 mmol anhydrous potassium carbonate as a base.The reaction, monitored by TLC, proceeded over 10 h.Aer the reaction was nished, ice-cold water was used to quench the mixture, yielding a white solid.The precipitate was thoroughly washed with chilled water and subsequently dried in a vacuum.Purication of the alkyne involved passing it through a short silica gel column using ethyl acetate : hexane (2 : 8, v/v) as the eluent.This purication process isolated alkyne 1 as a white solid with an impressive 88% yield.
Appearance: white solid; yield: 88%; mpt: 90-92 °C; FTIR (n max cm Aer undergoing recrystallization with a solution containing acetonitrile and n-hexane, the initially formed solid crystalline material successfully transformed into a singular crystal of compound 1, identied by CCDC no.2300460 and depicted in Fig. 1.The complete crystal data and its structure renement are presented in Table 1 and Fig. 2.

Synthesis of 2-(azidomethyl)
-5-hydroxy-4H-pyran-4-one, 28 2 The chloro derivative of kojic acid was synthesized by following the published literature with a few extra tweaks. 29In a 50 mL round-bottom ask, 1 mmol of kojic acid was dissolved in 2 equivalents of thionyl chloride at room temperature.The reaction mixture was stirred for 2 h.Upon completion of the reaction, work-up was performed by evaporating the reaction mixture using a rotary evaporator.Aer drying, the resulting solid was washed with ample water and utilized directly for azidation.A solution of sodium azide (1.5 equivalents) was heated to 85-90 °C for a minimum of 30 min.The obtained chlorokojic solid was then added to the heated solution, and at room temperature, it was stirred overnight.Aer the reaction, ice-cold water was used to quench the mixture, and the residue was ltered, washed with cold water, and vacuum-dried.The resulting brown solid was recrystallized in THF to obtain a pure compound.
In-depth studies on the time and temperature dependence of the probe, as well as competing metal ion titrations, were conducted to provide a comprehensive understanding of its behavior.The determination of the association constant (K a ) was achieved through the application of a Benesi-Hildebrand (B-H) plot.K a was calculated using the formula K a = 1/slope, where the slope was obtained by plotting 1/concentration of the analyte vs. 1/change in absorbance.Calculations of the limit of detection (LOD) and the limit of quantication (LOQ) 30 were done using 3s/S and 10s/S, respectively.In these calculations, s stands for the standard deviation of the blank, and S for the slope of the calibration curve.This methodology ensured a rigorous evaluation of the probe's sensing capabilities and provides valuable insights into its potential applications.
2.6 Computational studies 2.6.1 Density functional theory (DFT) and Hirshfeld surface analysis.DFT is an effective and adaptable approach to predict a wide range of physiochemical properties in chemical compounds.Its applicability spans various domains, encompassing medicinally signicant molecules, molecular probes, metal complexes, and more.DFT serves as an invaluable resource for comprehending and forecasting the diverse properties inherent in these chemical entities.
Utilizing the Gaussian09 program suite, 31 the stability assessments and geometrical optimizations of 1, 2, and probe 3 were conducted employing the B3LYP 32 /6-311G (d,p) basis set.For complex 3.Cu 2+ , the LanL2DZ basis set 33 within the DFT/ B3LYP method was employed to ascertain the most probable stable molecular congurations.This versatile approach enabled the determination of the molecular structures of the metal complexes, particularly emphasizing their stability.All the optimized geometries were validated by conrming the absence of negative frequencies, ensuring minimum energy on the potential energy surface.
Further analysis involved the calculation of the frontier molecular orbital (FMO) and HOMO-LUMO energy gaps of probe 3 subsequent to its complexation with Cu 2+ ions, shedding light on the electronic properties.These ndings were pivotal in understanding the intricate interplay between the molecular structures and electronic behaviors, offering insights into the reactivity and possible applications of these compounds.
Moreover, Hirshfeld surface (HS) and 2D-ngerprint plots were generated to understand the packing arrangements and intermolecular interactions of the synthesized compounds by using the Crystal Explorer 17.5 program. 34.6.2Molecular docking.Molecular docking analyses were conducted employing Autodock Vina 35 and Autodock Tools 1.5.7 to elucidate the protein-ligand interaction processes.The RCSB protein data bank provided pdb format crystal structures of cytochrome P450 14a-sterol demethylase (CYP51) from Mycobacterium tuberculosis complexed with uconazole (PDB ID 1EA1) and E. coli topoisomerase II DNA gyrase co-crystallized with clorobiocin (PDB ID 1KZN). Usng Gaussview 06, the Subsequently, the protein structures were prepared using Auto Dock Tools, which included removing the heteroatoms and inessential H 2 O molecules, introducing polar hydrogens, and adding Kollman charges.The docking pose that exhibited the least binding energy to the receptor was chosen for further analysis.Biovia Discovery Studio Visualizer v21 was utilized for visualization to enhance the interpretability of the results.The outcomes provide insights into the protein-ligand interactions, providing a comprehensive understanding of the docking scenarios.

Results and discussion
As mentioned earlier, the terminal bis-alkyne 1 with 5-amino isophthalte was synthesized using the propargylation reaction.The azidation of chlorokojic acid was performed to synthesize the organic azide 2. The proposed probe 3, named bis((1-((5hydroxy-4-oxo-4H-pyran-2-yl)methyl)-1H-1,2,3-triazol-4-yl) methyl) 5-aminoisophthalate was synthesized by the reaction between 1 and 2 via the CuAAC "Click reaction" using CuSO 4 -$5H 2 O and NaAsc as a catalyst, as illustrated in Scheme 1. Successful characterizations were obtained for the 5aminoisophthalte-linked terminal bis-alkyne (1), azide (2), and probe 3 (details are given in the ESI le).† 3.1 Spectroscopic analysis 3.1.1FTIR spectroscopy.The FTIR spectroscopic investigation of 1, 2, and the resulting probe 3 exhibited excellent agreement with the anticipated outcomes.Specically, alkyne 1 displayed distinctive peaks at 3269 and 2129 cm −1 , conrming the stretching frequencies of ^C-H and C^C bonds, respectively.Likewise, the existence of the azide group (-N 3 ) in 2 was affirmed by a sharp peak with high intensity at 2119 cm −1 in its spectrum.Upon the addition of 1 and 2, leading to the formation of the 1,2,3-triazole ring, the disappearance of the peaks at 3269, 2129, and 2119 cm −1 in the spectrum of 3 indicated the synthesis of a novel compound.Furthermore, a new peak at 3140 cm −1 validated the existence of the -C]C-H within the triazole ring.
3.1.2NMR and mass spectrometry.The successful syntheses of 1 and its 1,2,3-triazole derivative, denoted as 3, were conrmed through 1 H and 13 C NMR spectral analysis.In the 1 H NMR spectrum of alkyne 1, a distinguishing triplet at d = 3.62 ppm was observed, corresponding to the alkynyl protons of 1.Interestingly, this signal was missing in the spectrum of 3.However, the -CH 2 -Cprotons of 1 were identied in the proximity of the aromatic triazole moiety in 3.This was initially discerned through the downeld shi of the peak at d = 4.95 ppm in the 1 spectrum.Notably, the peaks at d = 75.35ppm and d = 77.67 ppm, corresponding to C^C bonds in the 13 C NMR spectrum of 1, were conspicuously absent in the spectrum of 3.This absence veried the successful synthesis of probe 3.
The observed molar mass at m/z = 592.14further reinforced the conrmation, providing additional support for the synthesis of the desired compound.

UV-Vis analysis
The expected ne-quality UV-Vis absorption characteristics of the synthesized 5-aminoisophthalate-based kojic acidappended 1,4-disubstituted bis-1,2,3-triazole as probe 3 were attributed to its rich aromatic and conjugated moieties embedded within its molecular structure.Subsequent absorbance analysis conrmed these expectations, revealing that probe 3 displayed a prominent absorption peak at l max = 296 nm.Following this, the potential of the probe for metal ion recognition was explored, wherein 0.5 mM solutions of both probe 3 and various metal ions, including Cr 3+ , Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ , Cu 2+ , Zn 2+ , Cd 2+ , Hg 2+ , Pb 2+ , Na + , K + , Mg 2+ , Ca 2+ , and Ba 2+ were employed.The UV-Vis analyses to assess the probe's ion recognition capabilities were carried out in a solvent medium consisting of a 4 : 1 ratio of DMSO/H 2 O.The absorption of the chemosensor remained largely unaffected by the majority of the tested metal ions.Notably, only Cu 2+ ions Scheme 1 Synthetic route for the 5-aminoisophthalte-linked probe 3.
induced a noticeable shi in absorption, thereby establishing the sensor's selective responsiveness to Cu 2+ ions, as depicted in Fig. 3, where the relative absorption change of the probe for different metal ions is presented.The relative absorption change was determined by subtracting the absorbance of the reference solution from the absorbance of the solution containing the metal ion, which gave the change in absorbance due to the presence of that specic metal ion and could be then expressed as the relative change compared to the reference absorbance.

Chemosensing potential of probe 3 for Cu 2+
The selective recognition behavior of probe 3 for Cu 2+ ions was investigated through UV-Vis spectroscopic analysis, wherein a 0.5 mM solution of the probe in a 4 : 1 mixture of DMSO and H 2 O was sequentially subjected to gradual additions of Cu 2+ ions (0-0.25 mM).The absorbance of the solution was measured aer each successive addition, enabling the assessment of the probe's recognition potential.Fig. 4 illustrates the alterations in the absorption spectra of probe 3 as Cu 2+ ions were progressively introduced.Initially, probe 3 exhibited a well-dened absorption peak at l max = 296 nm.However, with the introduction of the metal ions, there was a gradual hyperchromic response, accompanied by a shi toward a shorter wavelength (blue shi) of approximately 6 nm, ultimately leading to a shi in l max to 290 nm upon completion of the titration.Furthermore, K a for the interaction of Cu 2+ ions with 3 determined through the B-H eqn (1) was 4.89 × 10 3 M −1 , and the B-H plot for the same is illustrated in Fig. SI-14.† where A 0 is the initial absorbance intensity, A is the absorbance intensity with a particular concentration of metal ions, A 0 is the nal absorbance intensity, [M n+ ] is the concentration of metal ions, and K a is the association constant.

Competitive metal ion titration analysis
The competitive analysis of metal ions holds a crucial role in analytical chemistry, particularly in assessing the practical utility of 1,2,3-triazole-based chemosensors in addressing environmental concerns and optimizing industrial processes.
To evaluate the specicity of probe 3, a competitive metal ion titration was conducted in a solvent system consisting of DMSO/H 2 O (4 : 1 v/v) using an equimolar mixture of various metal ions (Fig. 5).The absorption spectra observed aer the titration suggested that the probe could selectively detect Cu 2+ ions, regardless of the presence of other ions.This was evident from the resemblance of the recorded absorption spectra to those obtained when probe 3 was subjected to Cu 2+ ions only.

Time and temperature-dependent analysis
The assessment of a chemosensor's sensitivity and stability in selectively binding metal ions requires a thorough examination of its response to changes in time and temperature.Analyzing the inuence of these variables on the sensor's performance is essential for optimizing its sensitivity and selectivity, ensuring a precise and dependable detection of target analytes.In pursuit of this objective, an experiment was conducted to investigate how time and temperature impact the binding affinity of probe 3 for Cu 2+ ions.The results are presented in Fig. SI-15 † regarding the effect of time on the binding of Cu 2+ ions with probe 3.It was observed that the absorption intensity of the probe 3.Cu 2+ complex solutions remained constant even as the interaction duration was extended.This observation indicated that the probe's binding affinity for Cu 2+ ions was timeindependent.
In the context of temperature-dependent analysis, probe 3.Cu 2+ solution was subjected to a temperature range from 20 °C to 50 °C, and the absorption spectra were collected at 2 °C intervals.Fig. SI-16 † illustrate the temperature effects on Cu 2+ binding to probe 3, revealing that variations within this temperature range had no signicant impact on the stability of probe 3.Cu 2+ complexation.Thus, the complexation was found to be stable across the examined temperature range.

Reversibility analysis
The reversibility of a chemosensor is a crucial aspect in the eld of analytical chemistry, providing insights into the dynamic interactions between the chemosensor and the target analyte.The signicance of this analysis lies in the ability to discern the reversibility of the chemosensor-analyte complex formation, which has implications for its practical utility in various sensing applications.In this context, the 3.Cu 2+ complex solution was subjected to the incremental addition of ethylenediaminetetraacetic acid (EDTA), which resulted in a decrease in absorbance (Fig. SI-17 †), attributable to a competitive binding scenario, wherein EDTA competed with the chemosensor for Cu 2+ binding sites.This competition was due to the higher affinity of EDTA for Cu 2+ ions, leading to the displacement of the chemosensor and subsequent alteration in the optical properties of the solution.However, these preliminary results indicated that probe 3 could be used as both a reusable sensor and as a scavenger of copper ions depending on the concentration of both Cu 2+ and EDTA, which may help address the toxicity concerns of Cu 2+ ions.

Fluorescence investigation
The photophysical attributes of probe 3 were examined through uorescence spectroscopy analysis in conjunction with UV-Vis absorption spectroscopy analysis.The emission of a 10 mM probe 3 solution excited at 340 nm (l ex ) was monitored, revealing a prominent emission (l em ) at approximately 436 nm accompanied by a shoulder peak at 414 nm (f = 0.27).Upon the successive addition of Cu 2+ ions (0-25 mM), a signicant enhancement of the uorescence emission of the probe was observed, as depicted in Fig. 6, exhibiting almost a two-fold enhancement in the uorescence intensity (f = 0.96), which conrmed the recognition of the Cu 2+ ions by 3. The LOD and LOQ were calculated by analyzing the correlation plot (Fig. SI-18 †) derived from the uorescence titrations and determined to be 8.82 mM and 29.39 mM, respectively.
Moreover, Table 2 compares the LODs between previously synthesized chemosensors and the present study, employing 1,4-disubstituted 1,2,3-triazoles for Cu 2+ ion detection.The LOD assumes particular signicance in environmental monitoring, especially concerning the metal ion concentration limits established by the Environmental Protection Agency (EPA).It signies the minimum concentration at which a specic metal ion can be consistently identied and quantied, conrming the precision and accuracy of analytical methodologies.Adhering to or exceeding the EPA's stipulated detection limit is   This compliance allows for recognizing and regulating potentially hazardous metal impurities in air, water, and soil, thereby facilitating the implementation of operative pollution control and risk management strategies. 36

Job plot analysis
In order to ascertain the stoichiometry between probe 3 and Cu 2+ ions, a Job's plot analysis was conducted, which involved preparing a range of solutions of probe 3 and Cu 2+ ions with equal concentrations while systematically altering the molar ratio of the probe (or metal ion) from 0.1 to 0.9.The absorbance of each of these solutions was measured, and the plot of the relative absorption change versus the molar ratio of the metal ions was analyzed.The positions of the maximum absorbance peaks in the graph represent the ratio of ligand to metal in the complex solution.For instance, a maximum absorbance corresponding to a mole fraction ratio of 0.5 on the metal mole ratio scale suggests a complex with a 1 : 1 ligand-to-metal (L : M)  composition.Similarly, peaks at 0.33 and 0.67 indicate complexes with L : M ratios of 2 : 1 and 1 : 2, respectively.As illustrated in Fig. 7, the maximum absorbance was at the 0.3 molar ratio, indicating a stoichiometric ratio of 2 : 1 (L : M) between the probe and the metal ions.
3.9 Computational studies 3.9.1 Structure optimization and FMO analysis.The structures of 1, 2, and probe 3 were optimized through DFT calculations using the B3LYP/6-311G (d,p) basis set.In the case of complex 3.Cu 2+ , the DFT/B3LYP method was applied with the LanL2DZ basis set to elucidate the most likely stable molecular congurations.FMOs play a crucial role in dening various molecular properties, including reactivity, light absorption, and electrical properties.Notably, the HOMO serves as an electron donor, while the LUMO functions as an electron acceptor.The difference between the HOMO and LUMO FMOs serves as a determinant of a compound's chemical stability.Optimized structures of 1, 2, and probe 3 and their contour plots are shown in Fig. SI-19.† Meanwhile, Fig. 8 provides a graphical representation of the FMOs and their corresponding energy gaps for probe 3 and complex 3.Cu 2+ .In probe 3, the electron density of the HOMO is localized on the 5-aminoisophthale group, while the LUMO is localized on the kojic acid of one arm of bis-1,2,3triazole.In contrast, in 3.Cu 2+ , the attachment of the Cu 2+ ions modies the FMO distribution.In both the HOMO and LUMO, the electron density resides in between the two ligands having a Cu 2+ ion attached to them.The depicted information shows that the energy gap of complex 3.Cu 2+ was less than that of probe 3, indicating the development of an extra stable bond between probe 3 and the Cu 2+ metal ion.
3.9.2Hirshfeld surface, 2D-ngerprint plot and 3Dinteraction energy frameworks analysis.In crystal engineering, the intermolecular interactions of the title compound are analyzed using Hirshfeld surface (HS) analysis via Crystal Explorer 34 version 17.5.This computational technique allows for the visualization and quantication of interactions within crystalline materials.By importing a CIF le into Crystal Explorer 17.5, three-dimensional Hirshfeld surfaces (3D-HS) and their corresponding two-dimensional ngerprint plots can be generated.The HS method partitions the space within a crystal based on the ratio of promolecule to procrystal electron densities, typically at a value of 0.5.This surface is then mapped using the normalized contact distance (d norm ), which is calculated in terms of external and internal distances (d e and d i , respectively) as well as the van der Waals (vdW) radii of atoms.The d norm values can be negative or positive, indicating whether intermolecular contacts are shorter or longer than the respective vdW separations.Specically, contacts with distances equal to the sum of the vdW radii are depicted in white, while those with distances shorter or longer than the vdW radii are represented in red and blue, respectively. 40This analysis provides insights into various types of intermolecular interactions, including H/H, C/H, O/H, and H/O contacts within the crystal lattice.
Whenever the distance between atoms equals the total of their van der Waals radii, a white spot appears on the HS.Each point on the HS signies two distances: (i) the distance from the nearest outer nucleus to the surface (denoted as d e ), and (ii) the distance from the surface to the closest inner nucleus (referred to as d i ).The HS is shown to be a transparent surface through which the structure of the molecules can be seen.The HS plots over d norm , d i , d e , shape index, curvedness, and fragment    a detailed two-dimensional graphical illustration of the intermolecular contacts in a crystal system.Fig. 10 represents the 2D ngerprint plots for the title compound 1, which illustrate distinct intermolecular interactions concerning the HS area.H/H was the most signicant contact in the crystal packing of 1, accounting for 33.8% of the total, while contacts such as C/H (17.8%),H/C (12.0%),H/O (9.1%), and O/H (10.6%) provided only a small contribution to the crystal packing.
Crystal Explorer 17.5 program was used to perform the energy framework calculations utilizing symmetry operations on the B3LYP/6-311G(d, p) functional basis set.
A collection of atoms with a radius of 3.8 Å was formed around a molecule.The computation process next involved guring out the various kinds of molecular interaction energies. 42All the electrostatic energy (E ele ) is related to the forces that exist between charged particles, whereas polarization energy (E pol ) is focused on the distortion of an electron cloud inside a molecule as a result of other nearby charge distributions.The term 'dispersive energy, E dis ' describes the weak attractive forces resulting from momentary variations in the electron distribution of a molecule.The amount of energy required to overcome the forces preventing two molecules from occupying the same space is known as repulsive energy (E rep ).The overall interaction energy of the molecule under investigation may be obtained by summing the various kinds of interaction energies, as the formula below illustrates: Fig. 11 illustrates the molecule used in the estimation of the interaction energies along the x, y, and z axes for compound 1.All types of interaction energies between the molecular pairs were calculated and are listed in Table 3 for compound 1.Herein, R shows the distance among the mean atomic spots (molecular centroids) and N signies the no. of molecules at a specic distance.The scaling factors that were employed for all types of interaction energies for the B3LYP/6-311G(d, p) basis set were k ele = 1.057, k pol = 0.740, k disp = 0.871, and k rep = 0.618, 43 and energy values for each type of interaction are reported in kJ mol −1 .A molecule exhibiting x, −y + 1/2, and z + 1/2 symmetry operations, positioned at a distance of 10.53 Å from the chosen molecule's centroid, demonstrates a maximum total interaction energy of 19.0 kJ mol −1 , as Table 3 illustrates.On the other hand, the symmetry operation x, y, and z situated at 4.77 Å from the chosen molecule's centroid yields the lowest total interaction energy of −46.3 kJ mol −1 .Fig. 11 depicts the E ele , E dis , and E tot for compound 1 along the x, y, and z axes, depicted in red, green, and blue, respectively.
3.9.3Molecular docking.The conformation of molecular probe 3 underwent optimization through molecular docking simulations to identify its energetically favorable docked structures.Examining the results in Table SI-2 † revealed a prominent docking score of −9.2 kcal mol −1 for probe 3 when interacting with the bacterial enzyme E. coli DNA gyrase topoisomerase II (PDB ID 1KZN).Within this interaction, six distinct hydrogen bonds were observed between SER121, ILE90, ASN46, VAL71, and VAL167, acting as hydrogen donors to the oxygen atom of the kojic acid group, denoted by dotted green lines (Fig. 12).Moreover, the p-electron density of the 5-aminoisophthalate moiety displayed an interaction with PRO79, while the p-orbitals of the benzene and triazole ring established palkyl interactions with ALA47 and ILE78.
Similarly, when engaged with the fungal enzyme 14a-demethylase lanosterol (PDB ID 1EA1), probe 3 exhibited a docking score of −8.8 kcal mol −1 , as illustrated in Table SI-3.† In particular, interactions involving six hydrogen bonds between ASP67, GLN72, PHE255, THR260, and ALA256 were identied, serving as hydrogen donors to the oxygen atom of the kojic acid group.Additionally, TYR76 acted as a hydrogen donor to the nitrogen atom of the 5-aminoisophthalate group.The benzene and triazole ring system of probe 3 showed p-orbital interactions with LEU321, ARG95, and MET79 (Fig. SI-20 †).Alongside these interactions, various p-interactions, including p-p T-shaped, p-anion, and p-sigma, were observed.The smaller bond length and the more negative docking score signify enhanced the stability of the hybrid molecules.Molecular docking analyses suggested promising results, primarily for the bacterial activities.The representation of the potent molecular probe 3 docked within the active site of DNA gyrase topoisomerase II (PDB ID 1KZN) is depicted in Fig. 12.The strategic molecular docking approach aimed to augment the antimicrobial efficacy of probe 3.

Probable binding mode
The hard and so acids and bases (HSAB) concept categorizes Cu 2+ as a borderline acid. 44In contrast, probe 3 possessed N and O atoms with lone pairs, making them electron-rich sites capable of interacting with metal ions.Moreover, the Job plot analysis of the probe with the metal ions established a 2 : 1 L : M Table 3 Interaction energies (kJ mol −1 ) for a unit cell of the crystal structure of compound 1 a a R is the distance between molecular centroids (mean atomic position) in Å and N is the number of molecules at that distance, Symop = rotational symmetry operator, E ele = electrostatic energy, E pol = polarization energy, E dis = dispersion energy, E rep = repulsion energy, E tot = total interaction energy, energies are in kJ mol −1 .
Fig. 12 2D and 3D interactions and an illustration of probe 3 docked in the active site of DNA gyrase topoisomerase II.ratio.In light of the HSAB principles and the host-guest relationship conrmed by the Job plot analysis, a plausible binding mode is depicted in Fig. 13, illustrating the metal ion binding to the ligand through the O atoms of the probe.

Conclusion
In conclusion, we synthesized a new uorescent chemosensor 5aminoisophthalate and kojic acid-based 1,2,3-triazole scaffolds to recognize Cu 2+ ions.Upon the addition of Cu 2+ ions, an almost two-fold enhancement in the emission intensity was exhibited.From the Job's plot, the binding stoichiometries of the complex were determined to be 2 : 1 (L : M).The association constant for the formation of the Cu 2+ complex was determined to be 4.89 × 10 3 M −1 .The detection limit of probe 3 was 8.82 mM, much lower than the value recommended by the EPA.The time and temperature-dependent analyses revealed that the chemosensor was stable, independent of the time and temperature upon complexation with Cu 2+ ions.Reversibility analysis indicated that probe 3 could be used as both a reusable sensor and as a scavenger of copper ions.A comparison analysis of LODs from previously developed chemosensors for Cu 2+ ions revealed that our probe is the most potent among them.DFT studies conrmed the complex formation mechanisms.Hirshfeld surface analysis revealed signicant intermolecular interactions in compound 1.Energy framework calculations indicated favorable interactions for the title compound 1.Molecular docking was performed to investigate the interaction between the probe and selected bacterial target with a B.E. of −9.2 kcal mol −1 .This dual-purpose investigation sheds light on the probe's ability to selectively detect Cu 2+ ions and its potential as an antibacterial agent.

Fig. 2
Fig. 2 Unit cell (Z = 4) showing four molecular units in the asymmetric unit of compound 1.

Fig. 4
Fig. 4 Systematic titration of probe 3 with the gradual addition of Cu 2+ ions; the inset represents the correlation between the probe's relative absorption intensity (A n /A o ) and the Cu 2+ concentration (mM).

Fig. 5 Fig. 6
Fig. 5 Absorption spectra of probe 3 indicating the selective recognition of Cu 2+ ions among different metal ions in equimolar concentrations.
Author(s).Published by the Royal Society of Chemistry RSC Adv., 2024, 14, 20908-20922 | 20915 Paper RSC Advances imperative for protecting public health and the environment.

Fig. 9
Fig. 9 (a) d norm , (b) d i , (c) d e , (d) shape index, (e) curvedness, and (f) fragment patches with a selected network of interactions of title compound 1.

Fig. 11
Fig.113D-interaction energy frameworks for compound 1 within the radius of 3.8 Å along the x, y, and z axes.

Table 1
Crystallographic data and structure refinement for compound 1

Table 2
Comparison of LODs from previously developed chemosensors for Cu 2+ ions a