Issue 5, 2023

Photo-assisted electrochemical CO2 reduction at a boron-doped diamond cathode

Abstract

We report on the coupling of photoelectrochemical water oxidation and electrochemical CO2 reduction to formic acid for a photoelectrochemical system capable of light and electrochemical energy conversion to chemical energy. Titanium oxide nanotubes (TiO2 NT) and boron-doped diamond (BDD) electrodes were used as a photoanode and a cathode, respectively. From CO2 electrochemical reduction at BDD, formic acid was obtained with a faradaic efficiency of about 86% and the system provided an overall energy conversion efficiency of 5.5%. From previous CO2 reduction at a dark electrolyzer based on a BDD cathode, the cell voltage was reduced from 2.7 V to 1.4 V with 52% saving of the electrical energy input. This resulted in an increase from 50% to nearly 80% of electrical-to-chemical energy conversion efficiency.

Graphical abstract: Photo-assisted electrochemical CO2 reduction at a boron-doped diamond cathode

Supplementary files

Article information

Article type
Paper
Submitted
31 Jan 2023
Accepted
06 Apr 2023
First published
07 Apr 2023
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2023,2, 733-738

Photo-assisted electrochemical CO2 reduction at a boron-doped diamond cathode

G. Iwai, A. Fiorani, J. Du and Y. Einaga, Energy Adv., 2023, 2, 733 DOI: 10.1039/D3YA00054K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements