Issue 19, 2023

Rapid synthesis of doped metal oxides via Joule heating for oxygen electrocatalysis regulation

Abstract

The development of low-cost, high-performance, and earth-rich electrocatalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is critical for Zn–air batteries (ZABs). Various doping and other modification methods lead to a large number of material systems, which require a rapid synthesis method for rapid screening. This study provides a simple and quick method for the synthesis of doped metal oxides as highly active catalysts in ZABs. Metal oxides with different structures, such as rock salt oxides, perovskite oxides, and so on, were synthesized by Joule heating, achieving rapid structural screening. Meanwhile, Fe, Mn, Ni, Zn, and Mg were also successfully doped in metal oxides, significantly improving the OER and ORR performance of CoO. Fe–CoO achieves an overpotential as low as 280 mV at a current density of 10 mA cm−2 and exhibits excellent long-term stability. Fe–CoO + Mn–CoO ZABs show a high power density of 305 mW cm−2 and significant durability, allowing stable cycling for more than 450 cycles at a current density of 5 mA cm−2. The proposed design and synthesis strategy of highly active earth-rich catalysts paves the way for low-cost and rapid synthesis of electrochemical catalysts.

Graphical abstract: Rapid synthesis of doped metal oxides via Joule heating for oxygen electrocatalysis regulation

Supplementary files

Article information

Article type
Paper
Submitted
24 Nov 2022
Accepted
03 Feb 2023
First published
09 Feb 2023

J. Mater. Chem. A, 2023,11, 10267-10276

Rapid synthesis of doped metal oxides via Joule heating for oxygen electrocatalysis regulation

Y. Li, H. Wu, J. Zhang, Q. Lu, X. Han, X. Zheng, Y. Deng and W. Hu, J. Mater. Chem. A, 2023, 11, 10267 DOI: 10.1039/D2TA09161E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements