Enzymatic amide bond formation: synthesis of aminooxo-acids through a Mycobacterium smegmatis acyltransferase †

A highly-productive strategy based on the use of an acyltransferase from Mycobacterium smegmatis (MsAcT), for the preparation of aminooxo-acids in water was developed. 1 M-scale biotransform-ations were carried out with excellent yields (68 – 94%) and rapid reactions (0.5 – 5 h) starting from anilines and a range of di ﬀ erent anhydrides. The high substrate-to-catalyst ratio ( M substrate / M catalyst : 25 000), enzymatic stability (one month without any activity loss), and excellent protein puri ﬁ cation yields (130 mg from 2 g of wet cell paste) made this process a green and cost-e ﬃ cient approach, which was successfully applied for the preparation of a key intermediate of SAHA synthesis.

][3][4] Amides are typically synthesized through condensation reactions between amines and carboxylic acids in the presence of an in situ prepared activating agent, 5 while other synthetic strategies include the oxidative amidation of alcohols or aldehydes. 5Conventional procedures are characterized by poor atom economy and are usually carried out in organic solvents, requiring a dry environment to avoid reverse hydrolysis reactions.For these reasons, the development of more sustainable and green synthetic strategies for amide bond formation has become a top challenge for scientists in recent years. 6ithin the field of biocatalysis, condensation reactions in organic media are usually catalyzed by lipases 7 (e.g., CAL B from Candida antarctica), while enzymatic amide syntheses in water mainly rely on penicillin acylases, predominantly applied in the preparation of β-lactam antibiotics, 8,9 or acyltransferases with promiscuous activity, such as the one from Pseudomonas protegens, presenting a narrow substrate scope and prolonged reaction times for the obtainment of the desired product (24 h). 10 Many esterases belonging to the bacterial hormone-sensitive lipase (bHSL) family have shown promiscuous acyltransferase activity.However, product hydrolysis and low transfer efficiency, requiring critical and careful reaction optimization, have been a major drawback for their application on a preparative scale. 11A better biocatalyst with similar behaviour is represented by EstCE1, a family VIII carboxylesterase with a strong preference for the water amidation and carbamoylation of aromatic compounds. 12Its crystal structure was recently solved and the amino acid motif important for promiscuous acyltransferase activity finally elucidated. 135][16][17][18] A further process implementation was obtained by its evolution through rational design (MsAcT S11C), unlocking the possibility of synthesizing tertiary amides. 19MsAcT, which was initially characterized for its capability to perform transesterification reactions in water, [20][21][22] demonstrated a remarkable activity even at high substrate concentrations (up to 0.5 M). 16,23,24 Although vinyl esters have shown superior reactivity as acyl donors with respect to ethyl ones, 14,16,21 their procurement remains a concern with just a few commercially available and at high costs.Furthermore their synthesis is based on Pdcatalysis and harsh reaction conditions (i.e., anhydrous THF, high temperature), which are not considered environmentallyfriendly. 15,17,18 To the best of our knowledge, no biocatalytic reactions or green processes for the preparation of vinyl esters have been reported to date.Within this framework, and considering the broad substrate scope of MsAcT, a rapid and robust enzymatic approach for the preparation of amides starting from amines and various anhydrides has been developed.Anhydrides not only are commercially available on a large variety, but they are also low-cost reagents.In addition, the new MsAcT-mediated synthetic strategy gave access to a range of different aminooxo-acids in water.
To increase the appeal of this procedure suberanilic acid, a key intermediate for the preparation of SAHA (i.e., suberoylanilide hydroxamic acid), a potent inhibitor of histone deacetylases (HDACs), 25 was synthesized in one single step, at high substrate loading and short reaction time, further increasing the potential of this enzyme in condensation reactions in water environment.
To monitor the MsAcT stability overtime, its activity was assayed (see ESI †) each week after its purification.No loss in the enzymatic performance was observed after 4 weeks of evaluation, storing the pure MsAcT at 4 °C in phosphate buffer (0.1 M pH 8.0).Optimization of the reaction parameters was firstly carried out using aniline (1a) and succinic anhydride (2a) (Table 1).
The substrate scope was further evaluated employing aniline (1a) in the presence of various anhydrides (2b-2m), the results are summarized in Table 1.The optimized reaction conditions have been applied.
The anhydrides corresponding to the entries 1-11, Table 1 provided the corresponding aminooxo-acids 3 in high yields (68-94%) and short reaction times (0.5-3 h).No reaction was observed only when NO 2 -phthalic anhydrides (entries 12 and 13, Table 1) were employed as donors, probably due to the steric hindrance, and the presence of a strong EWG (i.e., electron-withdrawing group).Among the non-symmetrical anhydrides (entries 5, 6 and 8, Table 1) 2e and 2h furnished the desired products with anhydride opening from the less hindered portion.Interestingly, a mixture of closed and open compounds was observed for 2f (entry 6, Table 1).2i was the only anhydride giving cyclic 4i as the single product (entry 9, Table 1) as previously reported in the literature. 26][28][29] Subsequently, various anilines (1b-q) keeping constant succinic anhydride 2a were assayed (Table 2).
Although the developed strategy clearly shows the versatility of MsAcT, giving an easy and sustainable access to a wide set of aminooxo-acids, the real leap in its application is the preparation of SAHA intermediate in a green and highly-productive way (3n, Fig. 1).
Vorinostat, the commercial name of SAHA, belongs to the histone deacetylase inhibitors (HDI).Presenting a broad spectrum of epigenetic activities, it is considered a potent anticancer agent, especially for tumour relapses.1][32] 3n here prepared in water environment, was obtained in excellent yield and reaction time (90%, 1 h) and   Reactions conditions: 1 M substrates, 1 mg mL −1 enzyme (120 U mL −1 ; 0.00004 M), 25 °C in phosphate buffer (0.1 M, pH 8.0); substrate-to-catalyst ratio 25 000.To increase the substrate solubility 10% DMSO was employed as cosolvent.easily purified by an acid work-up and recrystallization from MeOH.
In conclusion, the high substrate loading (1 M), and yields (68-94%), together with the rapid reactions (0.5-5 h) described in this work for the preparation of a range of aminooxo-acids starting from anilines and anhydrides, has completely overcome the perception about biocatalysis ineffectiveness when compared with traditional synthesis.The efficiency and versatility of MsAcT catalyst, here employed as pure enzyme, are noteworthy.Although protein purification is usually considered a time-, energy-and cost-consuming technique, the catalyst stability (more than one month without activity losses) together with the high purification yields, allowed for just one purification cycle, dramatically decreasing the overall processrelated costs and this strategy further appealing from an economic perspective.
The remarkably highly-productive system here described can compete with conventional methods for the amide production at preparative scale.Finally, the intermediate for the synthesis of SAHA and its derivatives was efficiently prepared in water, demonstrating the high potential of MsAcT of catalyzing condensation reactions in a sustainable manner.
conditions: 1 M substrates, 1 mg mL −1 enzyme (120 U mL −1 ; 0.00004 M), 25 °C in phosphate buffer (0.1 M, pH 8.0); substrate-tocatalyst ratio 25 000.To increase the substrate solubility 10% DMSO was employed as cosolvent.a Isolated yield.b Time corresponding to the maximum yield.No reaction was observed by adding the substrates in the same reaction conditions without the catalyst.
a P: Product.b Isolated yield.c Time corresponding to the maximum yield.No reaction was observed by adding the substrates in the same reaction conditions without the catalyst.

Table 1
Probing the substrate scope of MsAcT