Experimental review of PEI electrodeposition onto copper substrates for insulation of complex geometries†
Abstract
Polyetherimide (PEI) was used for coating copper substrates via electrophoretic deposition (EPD) for electrical insulation. Different substrate preparation and electrical field application techniques were compared, demonstrating that the use of a pulsed voltage of 20 V allowed for the best formation of insulating coatings in the 2–6 μm thickness range. The results indicate that pulsed EPD is the best technique to effectively coat conductive substrates with superior surface finish coatings that could pass a dielectric withstand test at 10 kV mm−1, which is of importance within the EV automotive industry.
Please wait while we load your content...
