Issue 37, 2020

Plasmonic-based sensitivity enhancement of a Goos–Hänchen shift biosensor using transition metal dichalcogenides: a theoretical insight

Abstract

Layered transition metal dichalcogenides (TMDCs) within two dimension (2D) have been gaining widespread consideration due to their exclusive optoelectronic properties. Here, we propose a hybrid nanostructured plasmonic biosensor composed of layered materials (TMDCs and graphene) on a Au film intended for increasing the Goos–Hänchen (GH) shift of the reflected light. MoS2 and WS2 are chosen as the TMDCs to constitute the sensing materials. We provide a detailed simulation and theoretical analysis of the performance of the sensor based on surface plasmon resonance (SPR) composed of the proposed hybrid nanostructure for wavelengths spanning from the visible to near-IR spectral region. The sensing performance is evaluated in terms of sensitivity, figure of merit (FoM), and enhancement factor. Four optimal configurations are achieved at different excitation wavelengths, where the largest enhancement factor of sensitivity is over five times in comparison to conventional bare gold sensors. Also, the detection limit of the refractive index (RI) change is decreased by two orders of magnitude and its corresponding sensitivity shows over ten times improvement.

Graphical abstract: Plasmonic-based sensitivity enhancement of a Goos–Hänchen shift biosensor using transition metal dichalcogenides: a theoretical insight

Supplementary files

Article information

Article type
Paper
Submitted
16 Apr 2020
Accepted
28 Aug 2020
First published
28 Aug 2020

New J. Chem., 2020,44, 16144-16151

Plasmonic-based sensitivity enhancement of a Goos–Hänchen shift biosensor using transition metal dichalcogenides: a theoretical insight

Y. Guo, N. M. Singh, C. Manas Das, Q. Ouyang, L. Kang, K. Li, P. Coquet and K. Yong, New J. Chem., 2020, 44, 16144 DOI: 10.1039/D0NJ01890B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements