Issue 67, 2019, Issue in Progress

Nonfullerene acceptors comprising a naphthalene core for high efficiency organic solar cells

Abstract

A fused-ring electron acceptor (FREA) NDIC is designed and synthesized. Inspired by IDIC, NDIC was constructed by replacing the benzene with a naphthalene ring in its core unit. IDIC exhibits an optical bandgap of 1.60 eV and a lower lowest unoccupied molecular orbital (LUMO) energy level of −3.92 eV. In comparison, NDIC displays an optical band gap of 1.72 eV and a higher lying LUMO energy level of −3.88 eV. Due to the higher energy level, inverted devices based on NDIC exhibit a higher open circuit voltage (Voc) of 0.90 V, which is much higher than that of IDIC (0.77 V). After a series of optimizations, a power conversion efficiency (PCE) of 9.43% was obtained with a PBDB-T:NDIC blend active layer, in comparison, a PCE of 9.19% was achieved based on IDIC. Our results demonstrate that a tiny variation in the molecular structure could dramatically affect the optical and electrochemical properties, and thus the photovoltaic performance.

Graphical abstract: Nonfullerene acceptors comprising a naphthalene core for high efficiency organic solar cells

Supplementary files

Article information

Article type
Paper
Submitted
06 Oct 2019
Accepted
21 Nov 2019
First published
29 Nov 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 39163-39169

Nonfullerene acceptors comprising a naphthalene core for high efficiency organic solar cells

Z. Zhang, X. Cui, M. Li, Y. Liu, D. Li, P. Jiang and Z. Bo, RSC Adv., 2019, 9, 39163 DOI: 10.1039/C9RA08092A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements