Issue 53, 2019

Asymmetric supercapacitors with excellent rate performance by integrating Co(OH)F nanorods and layered Ti3C2Tx paper

Abstract

Here we describe an aqueous asymmetric supercapacitor assembled using Co(OH)F nanorods on Ni foam (Co(OH)F@NF) as the positive electrode and layered Ti3C2Tx paper on Ni foam (Ti3C2Tx@NF) as the negative electrode. The Co(OH)F@NF was fabricated by a facile hydrothermal process. The nanorods were constructed as three-dimensional networks with stable structures and good durability in electrochemical reactions. As expected, the Co(OH)F@NF exhibited excellent capacitance (1265 mF cm−2 at 1 mA cm−2) and wonderful rate performance (90% from 1 to 10 mA cm−2). The Co(OH)F@NF//Ti3C2Tx@NF asymmetric supercapacitor devices showed high capacitance of 376 mF cm−2 and excellent rate capacity of 91% retention. When the two Co(OH)F@NF//Ti3C2Tx@NF devices were combined in series, a red led bulb could be lit for 12 minutes, further corroborating the possibility of the devices being used for practical applications.

Graphical abstract: Asymmetric supercapacitors with excellent rate performance by integrating Co(OH)F nanorods and layered Ti3C2Tx paper

Supplementary files

Article information

Article type
Paper
Submitted
15 Aug 2019
Accepted
18 Sep 2019
First published
30 Sep 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 30957-30963

Asymmetric supercapacitors with excellent rate performance by integrating Co(OH)F nanorods and layered Ti3C2Tx paper

S. Chen, X. Zhou, X. Ma, L. Li, P. Sun and M. Zhang, RSC Adv., 2019, 9, 30957 DOI: 10.1039/C9RA06393E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements