Issue 6, 2019, Issue in Progress

Exploring the temperature effect on hole transport properties in organic bulk heterojunctions

Abstract

The temperature effect on hole transport in representative organic bulk heterojunctions has been explored. Two model systems, namely, copper phthalocyanine (CuPc):fullerene (C60), and zinc phthalocyanine (ZnPc):C60, are chosen as case studies. The current–voltage (IV) characteristics have been measured in hole-only configurations in the temperature range of 100–280 K and the temperature-dependent hole transport process has been revealed. At high voltages and temperatures from 180 to 280 K, charge transport is governed by the trapping model with space charge limited conduction in the presence of an exponential trap distribution. However, at temperatures below 180 K, the mobility model with field-dependent mobility fits the experimental data well, indicating that charge conduction occurs through a hopping mechanism. The extended state and localized state affected by temperature are responsible for hole transport in high and low temperature ranges, respectively.

Graphical abstract: Exploring the temperature effect on hole transport properties in organic bulk heterojunctions

Article information

Article type
Paper
Submitted
05 Dec 2018
Accepted
14 Jan 2019
First published
23 Jan 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 3157-3161

Exploring the temperature effect on hole transport properties in organic bulk heterojunctions

B. Li, S. Zhang and X. Li, RSC Adv., 2019, 9, 3157 DOI: 10.1039/C8RA10006C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements