Issue 23, 2015

Pit assisted oxygen chemisorption on GaN surfaces

Abstract

A comprehensive analysis of oxygen chemisorption on epitaxial gallium nitride (GaN) films grown at different substrate temperatures via RF-molecular beam epitaxy was carried out. Photoemission (XPS and UPS) measurements were performed to investigate the nature of the surface oxide and corresponding changes in the electronic structure. It was observed that the growth of GaN films at lower temperatures leads to a lower amount of surface oxide and vice versa was observed for a higher temperature growth. The XPS core level (CL) and valence band maximum (VBM) positions shifted towards higher binding energies (BE) with oxide coverage and revealed a downward band bending. XPS valence band spectra were de-convoluted to understand the nature of the hybridization states. UPS analysis divulged higher values of electronic affinity and ionization energy for GaN films grown at a higher substrate temperature. The surface morphology and pit structure were probed via microscopic measurements (FESEM and AFM). FESEM and AFM analysis revealed that the film surface was covered with hexagonal pits, which played a significant role in oxygen chemisorption. The favourable energetics of the pits offered an ideal site for oxygen adsorption. Pit density and pit depth were observed to be important parameters that governed the surface oxide coverage. The contribution of surface oxide was increased with an increase in average pit density as well as pit depth.

Graphical abstract: Pit assisted oxygen chemisorption on GaN surfaces

Article information

Article type
Paper
Submitted
28 Jan 2015
Accepted
01 May 2015
First published
06 May 2015

Phys. Chem. Chem. Phys., 2015,17, 15201-15208

Author version available

Pit assisted oxygen chemisorption on GaN surfaces

M. Mishra, S. Krishna T. C., N. Aggarwal, M. Kaur, S. Singh and G. Gupta, Phys. Chem. Chem. Phys., 2015, 17, 15201 DOI: 10.1039/C5CP00540J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements