Issue 37, 2013

Application of tailored silica microspheres in coatings: synthesis, characterization, thermal and hydrophobic properties

Abstract

Tailored silica microspheres were synthesized using CTAB as a soft template, e.g. solid, mesoporous silica microspheres, solid silica core/mesoporous silica shell (sSiO2@mSiO2) microspheres and hollow silica microspheres. The prepared samples were characterized by SEM, TEM, XRD, and BET. The mechanism of morphological evolution was also proposed based on the experimental results, which reveals the formation processes of solid, mesoporous silica microspheres, solid silica core/mesoporous silica shell (sSiO2@mSiO2) microspheres and hollow silica microspheres. Then silica/silicon resin coatings consisting of the four representative silica particles were prepared. The corresponding FT-IR, UV-Vis spectra and surface water wettability test showed better performance for coatings comprised of the other three silica particles than that of solid SiO2 microspheres. Coatings comprised of mesoporous SiO2 had the best performance of heat insulation and heat preservation and hydrophobic property. The top-view and cross-sectional SEM images and the AFM images of the coatings were also analyzed to explain the relationship between factors such as surface morphology, film thickness, surface roughness of the coating and its related properties.

Graphical abstract: Application of tailored silica microspheres in coatings: synthesis, characterization, thermal and hydrophobic properties

Article information

Article type
Paper
Submitted
23 May 2013
Accepted
26 Jul 2013
First published
29 Jul 2013

J. Mater. Chem. A, 2013,1, 11465-11472

Application of tailored silica microspheres in coatings: synthesis, characterization, thermal and hydrophobic properties

M. Wang, Q. Zeng, B. Zhao and D. He, J. Mater. Chem. A, 2013, 1, 11465 DOI: 10.1039/C3TA12024D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements