Issue 8, 1987

Acid dissolution of soils and rocks for the determination of boron by inductively coupled plasma atomic emission spectrometry

Abstract

The boron concentration in rocks, soils and standard reference materials was determined using hydrofluoric acid-aqua regia dissolution followed by inductively coupled plasma atomic emission spectrometry (ICP-AES) using the B I 249.773-nm line, corrected for spectral interference by iron. An excess of fluoride was complexed with aluminium to release boron from the stable fluoroborate ion and to protect the borosilicate and quartz components of the instrument. Boron was not lost by volatilisation during volume reduction.

Soil and rock boron values determined using the recommended dissolution procedures were comparable to those obtained using the accepted sodium carbonate fusion procedure and by d.c. arc emission spectrophotometry, and those for standard reference materials showed good agreement and precision with the literature values.

Article information

Article type
Paper

Analyst, 1987,112, 1107-1112

Acid dissolution of soils and rocks for the determination of boron by inductively coupled plasma atomic emission spectrometry

B. A. Zarcinas and B. Cartwright, Analyst, 1987, 112, 1107 DOI: 10.1039/AN9871201107

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements