Issue 11, 2020

Sonochemical reaction to control the near-infrared photoluminescence properties of single-walled carbon nanotubes

Abstract

The effect of ultrasonic irradiation on the optical properties of single-walled carbon nanotubes (SWNTs) was investigated. Upon sonication in D2O in the presence of sodium dodecylbenzene sulfonate (SDBS) under air, red-shifted photoluminescence (PL) peaks at ∼1043 and ∼1118 nm were observed from the aqueous suspensions of (6,4) and (6,5)SWNTs, accompanied by a decrease in the intensity of the intrinsic PL peaks. Upon sonication with SDBS under an Ar atmosphere, the rate of spectral change increased with the sonication time and new PL peaks emerged at 1043, 1118, and 1221 nm. Meanwhile, upon the addition of 1-butanol, the PL peaks emerged only at 1043 nm and 1118 nm, while the emergence of the peak at 1221 nm was inhibited. On the other hand, a suspension with highly dispersed SWNTs was obtained upon sonication in the presence of sodium cholate without any change in the intrinsic optical properties of SWNTs. These experimental results reveal that the PL characteristics of SWNTs can be controlled by controlling the sonication conditions such as the type of surfactant used, the concentration of SWNTs, reaction environment, and the presence of an inhibitor such as 1-butanol.

Graphical abstract: Sonochemical reaction to control the near-infrared photoluminescence properties of single-walled carbon nanotubes

Supplementary files

Article information

Article type
Paper
Submitted
10 Jan 2020
Accepted
01 Feb 2020
First published
03 Feb 2020

Nanoscale, 2020,12, 6263-6270

Author version available

Sonochemical reaction to control the near-infrared photoluminescence properties of single-walled carbon nanotubes

Y. Maeda, Y. Konno, A. Nishino, M. Yamada, S. Okudaira, Y. Miyauchi, K. Matsuda, J. Matsui, M. Mitsuishi and M. Suzuki, Nanoscale, 2020, 12, 6263 DOI: 10.1039/D0NR00271B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements