MoSe2 nanosheet/MoO2 nanobelt/carbon nanotube membrane as flexible and multifunctional electrodes for full water splitting in acidic electrolyte

L. J. Yang; Y. Q. Deng; X. F. Zhang; H. Liu; W. J. Zhou

doi:10.1039/C8NR01572D

MoSe₂ nanosheet/MoO₂ nanobelt/carbon nanotube membrane as flexible and multifunctional electrodes for full water splitting in acidic electrolyte†

L. J. Yang,^ab Y. Q. Deng,^b X. F. Zhang,

^c H. Liu

*^ac and W. J. Zhou

*^ab

Author affiliations

* Corresponding authors

^a Institute for Advanced Interdisciplinary Research (IAIR), University of Jinan, Jinan, China

^b Guangzhou Key Laboratory for Surface Chemistry of Energy Materials, New Energy Research Institute, School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Center, Guangzhou, Guangdong, P. R. China
E-mail: eszhouwj@scut.edu.cn

^c State Key Laboratory of Crystal Materials, Center of Bio & Micro/Nano Functional Materials, Shandong University, 27 Shandanan Road, Jinan, Shandong 250100, P. R. China
E-mail: hongliu@sdu.edu.cn

Abstract

Acid-stable and efficient hydrogen evolution reaction (HER) catalysts have been widely reported. However, achieving full water splitting catalysis in acidic electrolytes is still an urgent task due to the lack of efficient, abundant and acid-stable oxygen evolution reaction (OER) catalysts. This rationally designed MoSe₂ nanosheet/MoO₂ nanobelt/carbon nanotube membrane (MoSe₂ NS/MoO₂ NB/CNT-M) is composed of highly conductive CNTs and hierarchical MoSe₂ nanosheets on MoO₂ nanobelts, and due to its flexible three-dimensional (3D) electrodes, possesses an open architecture for rapid ion/electron diffusion, maximising the exposure of its active sites. The MoSe₂ NS/MoO₂ NB/CNT-M achieved remarkable electrocatalytic performance for the HER, providing a geometrical current density of 1 mA cm⁻² at an onset potential of −23 mV vs. RHE, a small Tafel slope (69.4 mV dec⁻¹) and excellent long-cycle stability in 0.5 M H₂SO₄. More importantly, the obtained multifunctional electrodes delivered excellent electrocatalytic activity towards the OER under acidic conditions, with a very small onset potential (≈+1.43 V vs. RHE) and enhanced long-cycle durability. The two-electrode electrolyzer, composed of a MoSe₂ NS/MoO₂ NB/CNT-M both as an anode and a cathode, required a small voltage of 1.63 V to achieve 10 mA cm⁻² and improved electrocatalytic durability, which was better than that of an electrolyzer composed of RuO₂//20 wt% Pt/C. This work highlights the potential for active and abundant non-precious catalysts for full water splitting in acidic electrolytes.

This article is part of the themed collection: Nanoscale 10th Anniversary: Top Authors

Supplementary files

Article information

DOI: https://doi.org/10.1039/C8NR01572D
Article type: Paper
Submitted: 24 Feb 2018
Accepted: 21 Apr 2018
First published: 23 Apr 2018

Download Citation

Nanoscale, 2018,10, 9268-9275

Permissions

Request permissions

MoSe₂ nanosheet/MoO₂ nanobelt/carbon nanotube membrane as flexible and multifunctional electrodes for full water splitting in acidic electrolyte

L. J. Yang, Y. Q. Deng, X. F. Zhang, H. Liu and W. J. Zhou, Nanoscale, 2018, 10, 9268 DOI: 10.1039/C8NR01572D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Nanoscale