Issue 19, 2016

Monolithic-structured ternary hydroxides as freestanding bifunctional electrocatalysts for overall water splitting

Abstract

Efficient oxygen and hydrogen evolution electrocatalysts, based on low-cost and earth-abundant elements, are strongly required for sustainable hydrogen production through water splitting. Herein, we fabricated a monolithic-structured electrode by facilely electrodepositing NiCoFe ternary layered double hydroxides (LDHs) onto 3D conductive scaffolds, providing abundant fully exposed active sites for electrochemical reactions. The moderate Co dopant effectively improved the electrical conductivity of the LDH phase and substantially increased its intrinsic activity. When used for oxygen evolution, the as-obtained monolith LDH electrode exhibited superior kinetics with 275 mV overpotential required to achieve 10 mA cm−2 in 0.10 M KOH, as well as a very low activation energy of 21.0 kJ mol−1. Such a freestanding electrode was also able to catalyze hydrogen evolution efficiently in alkaline media, which further enabled a high-efficiency water electrolyzer delivering 10 mA cm−2 at a very low cell voltage of 1.62 V in 1.0 M KOH. This sheds fresh insight into the principle and process of practical water electrolysis through the rational design of precious-metal-free bifunctional electrodes with a monolithic configuration.

Graphical abstract: Monolithic-structured ternary hydroxides as freestanding bifunctional electrocatalysts for overall water splitting

Supplementary files

Article information

Article type
Paper
Submitted
15 Mar 2016
Accepted
10 Apr 2016
First published
11 Apr 2016

J. Mater. Chem. A, 2016,4, 7245-7250

Monolithic-structured ternary hydroxides as freestanding bifunctional electrocatalysts for overall water splitting

X. Zhu, C. Tang, H. Wang, B. Li, Q. Zhang, C. Li, C. Yang and F. Wei, J. Mater. Chem. A, 2016, 4, 7245 DOI: 10.1039/C6TA02216B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements