Issue 33, 2023

Exceptionally high-temperature in-air stability of transparent conductive oxide tantalum-doped tin dioxide

Abstract

The compositional, optical and structural stability of transparent conductive oxide SnO2:Ta (1.25 at% Ta) thin films at 650 °C and 800 °C in air was studied under isothermal conditions. After the high-temperature treatment, the elemental composition and the optical spectra of the material were unchanged. X-ray diffraction confirmed the conservation of a single rutile-type phase. Two strong Raman lines located out of the SnO2 phonon range indicated point defects in the material, which were identified as Sn vacancies and O interstitials by theoretical calculations. These point defects were partially healed out during the high-temperature treatment, without affecting the transmittance and reflectance of the material. Our study demonstrates an exceptionally high in-air stability of Ta-doped SnO2 and encourages its application in fields, where transparent conductive oxides with high-temperature and oxidation stability are required. These are, e.g., selective transmitters for concentrated solar power or electrodes for dye-sensitized solar cells and dynamic random-access memories.

Graphical abstract: Exceptionally high-temperature in-air stability of transparent conductive oxide tantalum-doped tin dioxide

Supplementary files

Article information

Article type
Paper
Submitted
17 Feb 2023
Accepted
20 Jul 2023
First published
21 Jul 2023

J. Mater. Chem. A, 2023,11, 17686-17698

Exceptionally high-temperature in-air stability of transparent conductive oxide tantalum-doped tin dioxide

M. Krause, M. Hoppe, C. Romero-Muñiz, A. Mendez, F. Munnik, A. Garcia-Valenzuela, C. Schimpf, D. Rafaja and R. Escobar-Galindo, J. Mater. Chem. A, 2023, 11, 17686 DOI: 10.1039/D3TA00998J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements