Issue 8, 2011

Synthesis and characterization of nanogels of poly(N-isopropylacrylamide) by a combination of light and small-angle X-ray scattering

Abstract

Thermo-responsive crosslinked nanogels of N-isopropylacrylamide (NIPAM) were synthesized by emulsion polymerization and the size was varied using different concentrations of surfactant (sodium dodecyl sulfate, SDS) in the polymerization process. The collapse behavior of the nanogels at the lower critical solution temperature at around 32 °C was investigated by dynamic light scattering, and by combined static light scattering (SLS) and small-angle X-ray scattering (SAXS). The combined data from SLS and SAXS were analyzed by a model for the nanogels which at intermediate temperatures included a central core and a more diffuse outer layer describing pending polymer chains with a low degree of cross linking. In the expanded state, the particles were modeled with a single component with a broad graded surface. In the collapsed state the nanogels were modeled as homogeneous and relatively compact particles. The amount of surfactant used had a profound effect on the final size of the nanogels owing to the phenomenon of colloidal stabilization of the emulsion droplets during polymerization. The combination of SLS and SAXS as applied to the nanogels is an attractive method for particle characterization as it spans a very large range of scattering vector from q = 0.0004 to 0.22 Å−1.

Graphical abstract: Synthesis and characterization of nanogels of poly(N-isopropylacrylamide) by a combination of light and small-angle X-ray scattering

Article information

Article type
Paper
Submitted
29 Jul 2010
Accepted
13 Sep 2010
First published
07 Oct 2010

Phys. Chem. Chem. Phys., 2011,13, 3108-3114

Synthesis and characterization of nanogels of poly(N-isopropylacrylamide) by a combination of light and small-angle X-ray scattering

G. R. Deen, T. Alsted, W. Richtering and J. S. Pedersen, Phys. Chem. Chem. Phys., 2011, 13, 3108 DOI: 10.1039/C0CP01359E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements