Issue 8, 2010

Antibody functionalized interdigitated μ-electrode (IDμE) based impedimetric cortisol biosensor

Abstract

This paper reports on an ultrasensitive, disposable, impedimetric biosensor for cortisol detection. C-Mab (a Cortisol specific monoclonal antibody) was covalently immobilized via amide bond on the surface of the interdigitated μ-electrodes (IDμEs) functionalized with dithiobis(succinimidyl propionate) (DTSP) self-assembled monolayer (SAM). After C-Mab binding, unreacted active groups of DTSP were blocked using ethanolamine (EA) and glycine (Gly) mixture. The disposable sensors were exposed to solutions with different cortisol concentrations and a label-free electrochemical impedance (EIS) technique was used to determine the cortisol concentration. EIS results confirm that the EA-Gly/C-Mab/DTSP/IDμE based biosensor exhibited the sensitivity of 2.855 kohms M−1 and could accurately detect cortisol in the range of 1 pM to 10 nM in saliva. This work establishes the feasibility of using an impedance based biosensor as a disposable cortisol detector, capable of working with complex bodily fluids (e.g., saliva). The architecture enables the use of cortisol sensors at point-of-care.

Graphical abstract: Antibody functionalized interdigitated μ-electrode (IDμE) based impedimetric cortisol biosensor

Supplementary files

Article information

Article type
Paper
Submitted
16 Apr 2010
Accepted
05 Jun 2010
First published
29 Jun 2010

Analyst, 2010,135, 1941-1946

Antibody functionalized interdigitated μ-electrode (IDμE) based impedimetric cortisol biosensor

S. K. Arya, G. Chornokur, M. Venugopal and S. Bhansali, Analyst, 2010, 135, 1941 DOI: 10.1039/C0AN00242A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements