Issue 7, 2020

MgB2 for MRI applications: dual sintering induced performance variations in in situ and IMD processed MgB2 conductors

Abstract

Magnesium diboride (MgB2) is known to have good potential to be used in a commercial liquid helium-free magnetic resonance imaging (MRI) magnet. The magnet is expected to be fabricated using reacted MgB2 conductors to minimize modifications in the existing magnet production technologies and operated in the persistent mode by forming a closed-loop using superconducting joints. The superconducting joints of the reacted MgB2 conductors are typically formed by placing unreacted magnesium and boron powders in between them followed by sintering. During this process, the MgB2 conductors will inevitably experience dual sintering in the vicinity of the superconducting joints. However, the effects of dual sintering on the performance of MgB2 conductors are still unknown. Therefore, herein, we dual sintered commercially available multifilament in situ and laboratory-made monofilament internal magnesium diffusion (IMD) processed MgB2 conductors (un-doped and C-doped) and evaluated their transport performance, microstructure, lattice parameters, and critical temperature in detail. In the IMD processed wires, the C-doped boron powder was found to promote a better diffusion of magnesium compared with the un-doped boron powder. Under typical dual sintering conditions, surprisingly, the C-doped in situ wire showed a simultaneous improvement in the engineering critical current density and n-value in different magnetic fields at 4.2 K and 20 K. On the other hand, the remaining conductors showed a strong dual sintering induced transport performance variation. Our findings provide insights into MgB2 conductors' performance after dual sintering for their further development towards MRI applications.

Graphical abstract: MgB2 for MRI applications: dual sintering induced performance variations in in situ and IMD processed MgB2 conductors

Supplementary files

Article information

Article type
Paper
Submitted
08 Nov 2019
Accepted
07 Jan 2020
First published
07 Jan 2020

J. Mater. Chem. C, 2020,8, 2507-2516

MgB2 for MRI applications: dual sintering induced performance variations in in situ and IMD processed MgB2 conductors

D. Patel, A. Matsumoto, H. Kumakura, M. Maeda, S. Kim, M. S. Al Hossain, S. Choi and J. H. Kim, J. Mater. Chem. C, 2020, 8, 2507 DOI: 10.1039/C9TC06114B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements