Issue 49, 2016, Issue in Progress

A phosphotungstic acid self-anchored hybrid proton exchange membrane for direct methanol fuel cells

Abstract

A phosphotungstic acid (HPW) self-anchored hybrid proton exchange membrane (PES/PVP-HPW) is prepared and evaluated in direct methanol fuel cells (DMFCs). The proton conductivity of the hybrid membrane is 0.045 S cm−1 at 25 °C, and reaches 0.078 S cm−1 at 80 °C. The hybrid membrane shows a methanol permeability of 1.65 × 10−6 cm2 s−1. The stability test for the hybrid membrane in 2 M methanol at 50 °C for about 100 h reveals that HPW is well immobilized in the hybrid membrane. The DMFC based on the PES/PVP-HPW hybrid membrane with a thickness of 55 μm exhibits comparable performance of 132 mW cm−2 to that of Nafion212 at 80 °C. The effects of the hybrid membrane thickness and methanol concentration on DMFCs performance are evaluated. The optimal methanol concentration and thickness of the membrane is about 1–2 M and 55 μm, respectively. Furthermore, a 130 h stability test for DMFC with PES/PVP-HPW demonstrates that the hybrid membrane is quite stable, which indicates that PES/PVP-HPW is an attractive low-cost alternative proton exchange membrane to Nafion® for portable power sources.

Graphical abstract: A phosphotungstic acid self-anchored hybrid proton exchange membrane for direct methanol fuel cells

Article information

Article type
Paper
Submitted
20 Mar 2016
Accepted
23 Apr 2016
First published
26 Apr 2016

RSC Adv., 2016,6, 43049-43055

A phosphotungstic acid self-anchored hybrid proton exchange membrane for direct methanol fuel cells

X. Xu, H. Wang, S. Lu, S. Peng and Y. Xiang, RSC Adv., 2016, 6, 43049 DOI: 10.1039/C6RA07318B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements