Issue 3, 2017

On-site determination of the migration amount of fluorescent whitening agents from paper to finger by fluorescence spectrophotometry

Abstract

A fluorescence collecting unit was self-assembled in our lab. This unit in combination with a fluorescence spectrophotometer was applied to quantify fluorescent whitening agents (FWAs) in paper samples. The unit is small and portable, containing three light emitting diodes and a lens. The light emitting diodes were used as excitation light sources, and the emitted fluorescence entered the fluorescence spectrophotometer for signal detection after passing through the lens and a fiber. With high sensitivity, not only the total amount of FWAs in the paper samples could be determined but also the trace amount of FWAs migrated from paper to finger could also be obtained. The limit of detection was 0.12 mg m−2. Thirty practical paper notebook samples were analyzed for their FWA content before and after finger touch. For the purpose of comparison, the European standard method was also applied to determine the migration of FWA in these paper notebook samples. The correlation of the analytical results obtained by the present method with those obtained by the well-established European standard method was satisfactory.

Graphical abstract: On-site determination of the migration amount of fluorescent whitening agents from paper to finger by fluorescence spectrophotometry

Article information

Article type
Paper
Submitted
10 Oct 2016
Accepted
06 Dec 2016
First published
09 Dec 2016

Anal. Methods, 2017,9, 465-472

On-site determination of the migration amount of fluorescent whitening agents from paper to finger by fluorescence spectrophotometry

Y. Yu, X. Wang, Q. Fei, Y. Yu, S. Tian, K. Wang, J. Jiang, D. Song, A. Yu and Z. Zhang, Anal. Methods, 2017, 9, 465 DOI: 10.1039/C6AY02777F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements