Issue 15, 2012
From the journal:

Journal of Materials Chemistry

Integration of light-harvesting complexes into the polymer bulk heterojunction P3HT/PCBM device for efficient photovoltaic cells†

Kai Yao,a   Cheng Liu,b   Yiwang Chen,*a   Lie Chen,*a   Fan Li,a   Kun Liu,b   Ruixue Sun,b   Peishan Wanga  and  Chunhong Yang*b  

* Corresponding authors

a Institute of Polymers/Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031, China
E-mail: ywchen@ncu.edu.cn, chenlienc@163.com
Fax: +86 791 83969561
Tel: +86 791 83969562

b Institute of Botany, Chinese Academy of Sciences, 20 Nanxincun, Beijing 100093, China
E-mail: yangch@ibcas.ac.cn
Fax: +86 10 62831962
Tel: +86 10 62836252

Abstract

The major light-harvesting chlorophyll (Chl) a/b-binding protein of photosystem II (LHCIIb) in plants is the most abundant membrane protein on earth. During the evolution of photosynthesis over more than 3.4 billion years, this light harvesting system has developed the most effective membrane protein for harnessing solar energy. Because of its high efficiency in absorbing and transferring solar energy, LHCIIb is becoming more and more attractive for mankind's effort to utilize solar energy. Here, we demonstrate the integration of LHCIIb with a P3HT/PCBM bulk heterojunction, in which a P3HT/PCBM active layer, instead of the “reaction centers” in photosystem II (PSII), absorbs the energy transfer from LHCIIb, consequently enhancing the solar energy utilization effectively in solid-state photovoltaic devices. The electronic integration into devices, achieved by inserting a layer of LHCIIb and then coating with a P3HT/PCBM active layer, can remain stable for several weeks. The energy transfer from LHCIIb to P3HT plays an important role in the increase in photocurrent density and broadens the solar absorption spectrum of the control device. The fabricated photovoltaic cells with an LHCIIb interfacial layer achieved an approximately 30% enhancement in the photocurrent and internal quantum efficiencies. Although the heat inactivation effect of the device limits the optimization of the normal structure, the pre-annealing treatment of the inverted organic photovoltaic (OPV) devices is used to realize an improvement in the photoconversion performance.

Graphical abstract: Integration of light-harvesting complexes into the polymer bulk heterojunction P3HT/PCBM device for efficient photovoltaic cells

About
Cited by
Related
Download options Please wait...

Supplementary files

Additions and corrections

Article information

DOI
https://doi.org/10.1039/C2JM16616J
Article type
Paper
Submitted
15 Dec 2011
Accepted
17 Feb 2012
First published
06 Mar 2012

J. Mater. Chem., 2012,22, 7342-7349

Permissions

Request permissions

Integration of light-harvesting complexes into the polymer bulk heterojunction P3HT/PCBM device for efficient photovoltaic cells

K. Yao, C. Liu, Y. Chen, L. Chen, F. Li, K. Liu, R. Sun, P. Wang and C. Yang, J. Mater. Chem., 2012, 22, 7342 DOI: 10.1039/C2JM16616J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements