Issue 5, 2011

Low temperature thermal evaporation growth of aligned ZnO nanorods on ZnO film: a growth mechanism promoted by Zn nanoclusters on polar surfaces

Abstract

ZnO aligned nanorods have been obtained on ZnO films by vapour phase at relatively low temperature (<500 °C). In this temperature range, which is for example interesting for glass-compatible processes for solar cell production, it is generally impossible to obtain a standard vapour–solid growth of these ordered nanostructures without the use of metal–organic precursors or metal catalysts. However, it is pointed out that, by means of a deposition of Zn nanoclusters on the polar surface of ZnO film grains, it is possible to obtain vertically aligned ZnO nanorods even at 480 °C. Zn nanocluster formation and rod growth can be achieved in a few minutes in a single process, without introducing any foreign element that might produce undesired material contamination and affect the physical properties of these nanostructures. The growth mechanism is discussed in detail, making comparisons with the results achieved on different substrates and under different growth conditions. Thanks to the comprehension of the growth mechanism, very uniform deposition of nanorods has been obtained on two square centimetres substrates in a small laboratory-scale reactor.

Graphical abstract: Low temperature thermal evaporation growth of aligned ZnO nanorods on ZnO film: a growth mechanism promoted by Zn nanoclusters on polar surfaces

Article information

Article type
Paper
Submitted
24 Sep 2010
Accepted
18 Nov 2010
First published
06 Dec 2010

CrystEngComm, 2011,13, 1707-1712

Low temperature thermal evaporation growth of aligned ZnO nanorods on ZnO film: a growth mechanism promoted by Zn nanoclusters on polar surfaces

D. Calestani, M. Z. Zha, L. Zanotti, M. Villani and A. Zappettini, CrystEngComm, 2011, 13, 1707 DOI: 10.1039/C0CE00670J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements