Feature Subset Selection for Cancer Classification Using Weight Local Modularity

Microarray is recently becoming an important tool for profiling the global gene expression patterns of tissues. Gene selection is a popular technology for cancer classification that aims to identify a small number of informative genes from thousands of genes that may contribute to the occurrence of cancers to obtain a high predictive accuracy. This technique has been extensively studied in recent years. This study develops a novel feature selection (FS) method for gene subset selection by utilizing the Weight Local Modularity (WLM) in a complex network, called the WLMGS. In the proposed method, the discriminative power of gene subset is evaluated by using the weight local modularity of a weighted sample graph in the gene subset where the intra-class distance is small and the inter-class distance is large. A higher local modularity of the gene subset corresponds to a greater discriminative of the gene subset. With the use of forward search strategy, a more informative gene subset as a group can be selected for the classification process. Computational experiments show that the proposed algorithm can select a small subset of the predictive gene as a group while preserving classification accuracy.

Gene expression microarray dataset technology plays a crucial role in helping researchers analyze thousands of genes simultaneously to assess the pathological diagnosis and classification of cancer diseases 1 . The gene selection from gene expression data is challenging because of properties such as small sample size, large dimensions, and high noise. Clinical diagnoses require the selection of a small predictive subset of biologically relevant genes with a high classification accuracy for cancers.
In recent years, different strategies have been proposed for feature selection, such as filter 2 , wrapper 3,4 , embedded 5 , and more recently, ensemble techniques 6 . In filter approaches, gene selection is dependent not on the classification algorithm but on a criterion that assesses the relevance or importance of each gene for class label discrimination on the basis of the generic characteristics of the data. Wrapper approaches are tightly coupled with specific learning algorithms to evaluate the generated subset of genes every time it is used and to achieve the best prediction performance for a special learning model 7 . However, wrapper approaches are more computationally intensive than filter approaches. Nonetheless, wrapper method is generally considered superior over other filters in terms of performance. Consequently, wrapper methods are often intractable for large -scale problems, particularly for microarray analysis 3 . Embedded techniques, search for an optimal subset of features depending on the classifier construction, which can be seen as a search in the combined space of feature subsets and hypotheses. Similar to wrapper approaches, embedded approaches are specific to a given learning algorithm, but the computational time is smaller compared to the wrapper methods 5 . Ensemble techniques have been proposed to cope with the instability issues observed in many techniques for FS when small perturbations in the training set occur. These methods are based on different subsampling strategies. A particular FS method is run on a number of subsamples and the obtained features are merged into a more stable subset. To date, filter methods are widely investigated by numerous researchers because of its simplicity and efficiency.

Related Work
Owing to the importance of gene selection in the analysis of the microarray dataset and the diagnosis of cancer, various techniques for gene selection problems have been proposed.
Because of the high dimensionality of most microarray analyses, fast and efficient gene selection techniques such as univariate filter methods [8][9][10] have gained more attention. Most filter methods consider the problem of FS to be a ranking problem. The solution is provided by selecting the top scoring features/genes while the rest are discarded. Scoring functions represent the core of ranking methods and are used to assign a relevance index to each feature/gene. The scoring functions mainly include the Z-score 11 and Welch t-test 12 from the t-test family, the Bayesian t-test 13 from the Bayesian scoring family, and the Info gain 14 method from the theory-based scoring family. However, the filter-ranking methods ignore the correlations among gene subset, so the selected gene subset may contain redundant information. Thus, multivariate filter techniques have been proposed by researchers to capture the correlations between genes. Some of these filter techniques are the correlation-based feature selection (CFS) 15 , the Markov blanket filter method 16 and the mutual information (MI) based methods, e.g. mRMR 17 , MIFS 18 , MIFS_U 19 , and CMIM 20 .
In recent years, the metaheuristic technique, which is a type of wrapper technique, has gained extensive attention and has been proven to be one of the best -performing techniques used in solving gene selection problems 21,22 . Genetic algorithms (GAs) are generally used as the search engine for feature subsets combined with classification methods. Some examples of GAs are the estimation of distribution algorithm (EDA) with SVM [23][24][25] , the genetic algorithms support vector machine (GA-SVM) 26 , and the K nearest neighbors/genetic algorithms (KNN/GA) 27 .
However, most of the existing methods, such as the mutual information based methods [17][18][19][20] , only choose the strong genes in the target class but ignore the weak genes which possess a strong discriminatory power as a group but are weak as individuals 3 .
Over the past few decades, complex network theories have been used in different areas such as biological, social, technological, and information networks. In this present study, a novel method is proposed to search for the 'weak' genes by using the sequential forward search strategy. In the proposed method, an efficient discrimination evaluation criterion of a gene subset as a group is presented based on the weight local modularity (WLM) in a complex network. This method employs the advantages of the weight local modularity which most networks are composed of. The WLM are communities or groups within which the networks have a locally small distance between the nodes, but have a relatively large distance between the various communities 28 . By constructing the weighted sample graph (WSG) in a gene subset, a large weight local modularity value means that the samples in the gene subset are easily separated locally, and that the gene subset is more informative for classification. Therefore, the proposed method has the capability to select for an optimal gene subset with a stronger discriminative power as a group. The effectiveness of method in this present study is validated by conducting experiments on several publicly available microarray datasets. The proposed method performs well on the gene selection and the cancer classification accuracy.

Results
In this section, the experimental results and analysis of WLMGS on several public microarray datasets are presented. The proposed algorithms are programmed in the Matlab 2012b environment, and the simulations are performed with the use of an Intel Core i3-2310M-2.1 GHz CPU having 2 GB of RAM. The nearest neighborhood classifier (1NN) together with the Euclidean distance and support vector machine (SVM) classifiers with C = 100 and RBF kernel are utilized to assess the generated solutions.
In order to avoid the selection bias 29 , a 10-fold cross-validation over each dataset is performed in the genes section, wherein gene subsets are selected from the training instances (90%), and then, the accuracy is estimated over the test instances (10%). This process is performed 10 times. The final gene subset gs is composed of more frequent genes in the ten selected subsets. The precision in this present work is of 10 times accuracy average. Five filter methods and two wrapped methods are compared with the method used in this present study, and these include the CMQFS 30 , the mRMR, the MIFS-U, the CMIM, the Relief 31 , the SVMRFE 4 , and the KNNFS 32 methods.

Datasets.
To validate the effectiveness of the method of this present study, several experiments were performed on some well-known public gene microarray datasets with a high dimensionality and small sample size. These datasets are downloaded from http://csse.szu.edu.cn/staff/zhuzx/Datasets.html and from [33][34][35] . A summary about these datasets is provided in Table 1. Before conducting the experiments, each represented gene was normalized, that is, its mean and standard deviation were set to zero and one, respectively.
In mutual information computations, the continuous features were discretized to nine discrete levels as in ref. 36 and 37. The feature values were converted to values between μ− σ/2 and μ + σ/2 to 0, the four intervals of size σ to the right of μ + σ/2 to discrete levels from 1 to 4, and the four intervals of size σ to the left of μ− σ/2 to discrete levels from − 1 to − 4. Very large positive or small negative feature values are truncated and discretized to ± 4 appropriately. In this paper, the FEAST tool 38 is used to calculate for the mutual information (MI) and the conditional mutual information (CMI).
Computational results. In this present study, the related parameters λ, θ are set to 15 and 0.02, respectively. Tables 2 and 3 summarize the best classification accuracy in 1NN and SVM classifiers under the selected genes, respectively, when compared with the five filter methods. Figures 1 and 2 are the average classification accuracies using the 1NN and SVM classifiers at different number of genes selected by different methods, respectively. |#G| presents the number of selected genes when the best average accuracy is achieved. ACC is the best average accuracy, because it possesses a 10 times accuracy rate. The best average results are shown in bold. The improved performance of the method used in this present study is reached by using a different parameter k. For the filter methods in Tables 2 and 3, it is observed that the method used in this study outperforms the other filter methods, because it reaches a higher classification accuracy for the 1NN and SVM classifiers in most cases. For the ALL-AML-3C dataset, the method (WLMGS) in this present study obtains a good performance: 98.57% (1NN) and 98.75% (SVM), which are both higher compared to the CMIM, mRMR, MIFS_U, and CMQFS, although the 3 genes in the 1NN and the 4 genes in the SVM are selected.    For the DLBCL_A dataset, the algorithm in this study achieves a better prediction accuracy of 98.62%, with an average of only 10 genes in 1NN, and an accuracy of 99.28% with an average of only 13 genes in the SVM. However, the best algorithm, as compared with the other methods is the mRMR, which selects 22 genes to gain a prediction accuracy of 95.71% in 1NN, and a 98.66% prediction accuracy in SVM.
For the SRBCT dataset, the MLL dataset and the Lymphoma dataset, in 1NN (SVM), the method in this present study obtains perfect prediction results 100% (100%) with only an average of 4 (5) genes, an average of 4 (4) genes, and an average of 3 (3) genes respectively. These results are compared with the best results of mRMR: 100% with an average of 12 (12) genes, 100% with an average of 28 (16) genes, and 100% with an average of 5 (5) genes, respectively. It can be seen clearly that for these datasets, the mRMR algorithm produces better results as compared to the other methods. The key reason is that mRMR not only considers the relevance of genes, but it also considers the redundancy between genes. However, the mRMR method only measures the quantity of irrelevant redundancy (IR) 30 , but does not deal with its relevant redundancy (RR) 30 . This can cause a problem since this method chooses some irrelevant variables prematurely, and is delayed in picking out some useful variables 39,40 . Therefore, the best performance only can be obtained by using more genes. In this present study's method, is used to measure the relevant independency among gene subset, which is helpful for classificationWLM s . Therefore, all these useful genes, including the power genes as individuals, and the 'power' genes as a group are explored, and this contributes in gaining the best results by using fewer genes. The experiment results in this present study are perfectly consistent with the stated facts and confirm the effectiveness of this study's approach.
In the CNS dataset, the average number of selected genes in this present study's method is larger than the CMIM in 1NN and SVM. However, the best results of this study are higher than CMIM.
In the Lung dataset, there are 139 samples in the first class and only 6 samples in the third class. For the imbalanced dataset, the method of this study achieves a higher accuracy of 99.02%, with an average of 9 genes in 1NN, and 97.07% with an average of 10 genes in SVM. This is significantly superior compared to the other methods.
In the Colon dataset, this study's method performs better than the other algorithms, although the number of selected genes of this study's method is larger.
To further strengthen the efficiency of the method in this study, the 1NN and SVM classification results with a different number of selected genes for all the methods are shown in Figs 1 and 2, respectively. Therefore, it can be concluded from Figs 1 and 2 that this study's method achieves better results with fewer selected genes in 1NN and SVM compared to other methods in most cases. These findings are identical with the results in Tables 2 and 3.
Furthermore, the results in this study are validated in Tables 4 and 5 by conducting a statistical paired samples one-tailed test. This statistical test is used to verify whether there is any significant difference in the accuracy and the number of selected genes by using a significance interval of 95% (a = 0.05). The results of this study show that all the p-values obtained are less than 0.05. This means that there is a significant difference in the accuracy and the number of selected genes in the method used in this study as compared to the other methods on all datasets, respectively. It can be concluded therefore that this study's proposed method significantly outperforms the other algorithms.
The comparison with the wrapped methods, such as the SVMRFE and the KNNFS has also been conducted in this study. As it is previously known, the wrapped algorithms depend on the classifier during the learning process. This results to greater classification accuracy, but this also requires a higher computational cost for a repeated training of classifiers other than the filter methods, such as the SVMRFE which depends on the SVM classifier, and the KNNFS which depends on the 1NN classifier. From Figs 3 and 4, the WLMGS method gets better results compared to the results of the SVMRFE and KNNFS methods in most cases. However, both the SVMRFE and KNNFS methods are more time-consuming than the WLMGS method as illustrated in Fig. 5. Therefore, for the purpose of efficiency, the filter methods are suggested to be applied in practice. This fact is verified from Figs 3 and 4, where the wrapped methods only perform well in the specified classifier, but worse in other classifiers. This means the wrapped methods possess the poor generalization ability. However, the WLMGS method achieves balanced results in both classifiers.     Gene set enrichment analysis. In order to understand whether this study's method is able to extract interactions with a biological meaning, the discriminatory gene subset selected by this method are analyzed by conducting the gene set enrichment analysis on the DAVID 41 software (Database for Annotation, Visualization, and Integrated Discovery). DAVID is able to provide a comprehensive set of functional annotation tools for investigators to understand the biological meaning behind a large list of genes. The detailed information can be seen in ref. 41.
The top ten genes selected by using different methods are supplied into the DAVID website (https://david.ncifcrf.gov/home.jsp). The Functional Annotation Tool is utilized to achieve the Functional Annotation Clustering results (the Classification Stringency is set to High). The group Enrichment Score (ES) and the geometric mean (in -log scale) of the member's p-values in a corresponding annotation cluster, is used to rank their biological significance. Thus, the top ranked annotation clusters most likely have consistently lower p-values for their annotation members. The larger the enrichment score, the more enriched is the gene subset.
For this present study's method, the first value from the top annotation cluster having the largest ES, and the concerned terms having similar biological meanings are presented in Table 6. It is clearly seen that the genes selected by WLMGS are related to genes having cancer hallmarks (that is, genes that belong to the cancer-related Gene Ontology (GO) terms). This means that the gene subset selected by WLMGS is more enriched than the gene sets related to a biology process or a biology pathway.
To further verify the WLMGS's effectiveness, the biological significance comparisons in terms of the enrichment score are achieved with WLMGS and the other methods as seen in Table 7. In general, the results in Table 7 indicate that the genes selected by WLMGS are more significant in the biological enrichment analysis.

Discussion and Conclusion
As mentioned previously, the proposed approach in this study is able to capture different (small) gene subsets with a high prediction rate, which is important for further biological studies. More attention should be fixed on this approach to identify the biomarkers for the concerned cancer. Based on the weight local modularity, the proposed method in this study is able to explore the informative genes wherein the weighted sample graph has a small within-class distance and a large between-classes distance. Thus, the samples in the same class are possibly close to each other, and samples in different classes are likely far away from each other. This means that the samples are easily separated. From Theorem 1, the local cluster structure for the samples in a class also contribute to its higher WLM s , therefore, these specific genes is chosen to predict each cancer subtype. Furthermore, the method of this study is still efficient for the imbalanced dataset, because the weight local modularity considers the local cluster-connectivity and overcomes the global network dependency. The small sample cluster which includes only several samples, also helps to enhance the WLM s . Hence, the method of this study is preferred particularly for microarray datasets having a few samples. Therefore, this study's method is able to select genes that have the best local and global structure preserving ability. Additionally, this study's method is not affected by the noise sample points, where the small weights only have a minimal effect on WLM s . Lastly, the proposed method in this study can pick not only the discriminative genes individually, but also as a group. Both power genes as an individual and power genes as group but weak as individuals are explored for classification learning.
As previously discussed, there are two parameters in the method of this study which is used during the process of constructing the weighted sample graph and selecting genes, e. g. λ, k. The effect of these two parameters is studied in the following experiments.
The parameter k is the number of neighbors used in constructing the weighted sample graph. This determines the number of weight edges in a constructed samples graph, that is to say, a large k corresponds to a higher w k , W k , and vice versa. Figure 6 summarizes the average 1NN accuracy results conducted ten times on all datasets using different values of k in this study's method. It is clearly noted that k has an influence on the performance of some datasets, such as the DLBCL_A and the CNS. In fact, k is less than the number of samples in the smallest class. For most of the datasets, the k in {3-11} is more effective. In this study, different k's are adapted to obtain a better performance for the different datasets. The second parameter λ is the optimal number of selected genes. In practice, it is difficult to automatically determine the optimal number of selected genes. As previously discussed, the selection procedure should be stopped if the WLM s is not increased greatly. As shown in Table 8, the incremental amount of WLM s is proportional to its performance. The strategy in this study is that the iterative procedure will be terminated if the increment of WLM s is lower than the very small value θ. From Fig. 6 and Table 8, it is good to determine the value of λ when the threshold θ of its difference is set to 0.02. As previously shown for all the datasets, the best performance is achieved withinλgenes (less than 15 genes). Therefore, it is possible that the increment of WLM s is the criterion for the termination of this study's method, and this automatically determines the number of selected genes. The λ parameter was assigned with the value of 15 in this study.

Conclusion.
In this study, a new approach based on weight local modularity to gene subset selection is introduced. The sequential forward selection and the greedy search strategy are utilized to optimize the weight local modularity. Firstly, given a selected gene subset S, the candidate gene g is more informative if the increment of WLM s (S ∪ g) on the genes spaces S ∪ g is large. Furthermore, the numberλ of the optimal genes is automatically determined by the incremental of WLM s . From the experiments, the λ is small enough to gain a better performance, which greatly reduces the time cost of this method. Additionally, the method in this study is effective for imbalance datasets. Experimental results demonstrate that the method in this study outperforms others. The gene subsets selected by this method are more enriched. The key reason is that weight local modularity captures both the local and global structures in the weight network. The weight local modularity provides the proposed method with the ability of not only finding a set of common genes differentiating all cancer types but also identifying the specific genes related to each type of cancers.
However, the computational cost of the proposed method is relatively higher than the others, even if the fast K-Nearest Neighbor Graph (K-NNG) algorithm is applied. The adaptive algorithm to choose the optimal k should be developed for different datasets.
In the future, recent technologies 42 can be applied to further improve the accuracy and robustness of the predictors. It is known that tumor heterogeneity prevents the identification of robust cancer biomarkers. Some virtual data sets, called random microarray data sets (RDSs) were generated from the original data set. Next, distinct random gene sets (RGSs) were generated. A survival screen using each RGS against each RDS was performed. For each RDS, the gene sets and the survival screening P-value of which is < 0.01, were achieved. The purpose of this is that a signature derived from one data set is transferable when applied to another data set. Also, an integrative network analysis of the gene signatures and the breast cancer driver-mutating genes in a protein interaction network, allowed the identification of several metastasis network modules. Each module contains the genes of one signature and their directly interacting partners that are cancer driver-mutating genes 42 Table 7. The enrichment score results by DAVID in Top ten genes selected by different methods. The larger the enrichment score, the more enriched the genes subset.

Methods
The definition of weighted local modularity in a complex network. A complex network is a graph (network) with non-trivial topological features-features that do not occur in simple networks such as lattices or random graphs, but often occur in graphs which are modelling real systems. Most of the real-world complex networks are composed of some communities or clusters within which they have close connections between nodes but have sparse connections between the various communities 43 , as seen in Fig. 7. Reliable algorithms 43,44 are supposed to identify good partitions about clusters or communities, but the question remains on how clusterings are considered to be good or bad. In order to distinguish between 'good' and 'bad' partitions, the most accepted quality function is the modularity Q of Newman and Girvan 44 . The function is based on the idea that a random graph is not expected to have a cluster structure. In this way, the possible existence of clusters is revealed by the comparison between the actual density of edges in a subgraph and the density expected in the subgraph if the vertices of the graph were attached regardless of community structure. However, modularity Q optimization is widely criticized for its resolution limit 43 because the modularity is a global measure. To overcome the problem, the localized modularity for the local structures of the undirection network has been introduced by considering the local cluster-connectivity 45 . In many complex networks most clusters are connected to only a small fraction of the remaining clusters, called the local cluster connectivity. From the view point of local connectivity, the local modularity (LM) is defined as follows: where m k is the number of edges within the community k and M k is the total number of edges in the community k and its first neighbor. d k is the sum of the degrees of nodes in community k. C is the number of communities in the graph or the number of different classes for the samples in Eqs (4 and 5). The more locally connected clusters a network has, the higher is the LM.
However, as previously described, the LM is not able to evaluate the extra-class and intra-class distances because it is not related to the distance between nodes, which is not good for a classification problem. Therefore, in this study, the Weight Local Modularity Q (WLM) for the weighted graph is proposed and is defined by: where w k is the sum of the weights of the internal edges of community k and W k is the total number of weights of the internal edges in community k and its first neighbor. s k is the sum of the strengths of all the vertices in community k. The strength of a vertex is the sum of the weights of edges adjacent to the vertex. From Eq. 2, it can be concluded that a larger WLM corresponds to larger weights, (small distance in the same cluster) or to smaller weights (large distance between classes locally), which means that the nodes for different clusters are easily separated. Hence, these genes that minimize the within-cluster distance and maximize the between-cluster distance are preferred and get a higher weight 46 . Because of this this fact, this present study introduces a new local evaluation criterion for the gene subset using the weighted local modularity. The idea behind the method in this study  Table 8. The increment of WLM s with selected genes. Note: AN_B: the average number of selected genes while the best result is obtained.
is that the gene subset where the weighted sample graph has a higher. Having a higher WLM is more informative and the samples in the gene subset are classified accurately.
The proof can be seen in the Appendix section. Furthermore, where w k_out is the total weight of the first neighbors of the community k and W k = w k + w k_out . It is worth noting that there is no difference on the classification performance between WLM and WLM s . In this paper, the simplified version WLM s of WLM is used.
From Theorem 1, good local clusters are the ones with large internal weights (small internal distances) and small external weights (large external distances) as shown in Fig. 7. This result is consistent with the property of local cluster. Another advantage of WLM s is that it is not affected by noisy samples. Noisy samples usually stay away from normal samples, which results in smaller weights in the weighted sample graph. From Theorem 1, smaller weights cause very little impact on WLM s . Therefore, in this study, the WLM s , which is a simple version of WLM, is adopted instead of LM and WLM.
A gene g is considered to be good if the WLM s is increasing greatly while g is accepted in the selected gene subset gs.
Gene subset selection based on WLM s . From the previous information on WLM S , the gene subset is preferred when the weighted sample graph has a higher WLM S . Weighted sample graph. Given a m × n microarray dataset (m corresponding to samples and n corresponding to genes), the gene subset gs which is selected from n genes is defined by: gs = {g 1 , g 2 , … , g n1 }. The weighted sample graph G(V, A) in gs is constructed as follows: there is a weighted edge A(i, j) between where v i is the node i corresponding to i-th sample, k − NN(v i ) is the k-neighborhoods set of node i. A(i, j) = exp(− d(v i , v j )), d(v i , v j ) denotes the Euclidean distance between v i and v j : d(v i , v j ) = ||v i − v j || 2 , and in here, ||·|| 2 is the L2-norm. A is the affinity matrix. k is the predefined parameter. k does not take large values, and it ranges generally in {5-11}. This is discussed in section 5.3.
Gene subset selection. This study's method aims at identifying a gene subset where a weighted sample graph can achieve a larger weighted local modularity. To reduce the time complexity in the method of this study, the sequential forward during genes selection is adopted and the greedy search is utilized to optimize the WLM s . The proposed method namely WLMGS is illustrated in Algorithm 1. WLMGS works in a straightforward way. Firstly, several relative parameters are initialized, i.e.λ, k, gs and the first geneg 1 in gs where the weighted sample graph has the largest value is selected as the starting point of the search procedure. Sequentially, during each selection process, genegwith the largest WLM s is selected to join gs from the G. This iterative selection procedure will be terminated while the number of selected genes in gs is not less than the pre-specified threshold λ. In practice, the optimal λ is hard to determine due to the noisy genes that may increase the information amount of gs as they are selected. Because of this, the gene subset with the largest WLM s may include noisy genes. To alleviate this problem, this study presents an alternative way to assign λ with an appropriate value wherein the iterative procedure will be terminated if the difference of WLM s (gs i+1 ) with WLM s (gs i ) is lower than a very small value θ. The gene g i+1 brings minimal information to the selected genes in gs and the WLM s (gs i+1 ) increases lightly after it has been picked into gs, where gs i and gs i+1 are the selected gene subset in the i-th and (i + 1)-th iterations, respectively. As it is known, the selection procedure should be stopped if the information embodied by gs does not increase greatly 47 .
Additionally, the genes selected based on WLM s have a large relevant independency (RI) which contributes to a better classification accuracy. The samples in the selected genes can be easily separated. The gene subset as a group selected by this study's method has a strong relevance with its class label. Therefore, method of this study can address the problem of redundancy among genes.
In WLMGS, the most time-consuming step is the construction of the weighted sample graph iteratively. The total is about ο(λnm 2 ). In this study, the fast K-Nearest Neighbor Graph (K-NNG) construction method 48,49 is applied to the construction of the weighted sample graph, which reduces the time complexity from ο(λnm 2 ) to ο(λnm 1 14 ).  Justification of WLMGS based on k-means cluster. In this section, the proposed feature evaluation criterion based on the weight local modularity is demonstrated by the theory of k-means cluster. The k-means cluster 50 is the most well-known clustering algorithm. This algorithm iteratively attempts to address the following objective: given a set of points in a Euclidean space and a positive integer p (the number of clusters), the points are split into p clusters so that the total sum of the Euclidean distances of each point to its nearest cluster center is minimized, and is defined as follows: Here, x i and µ c t is respectively the i-th sample point and its nearest cluster center, ||·|| 2 is the L2-norm. In the weighted feature approache by k-means, the features that minimize the within-cluster distance and simultaneously maximize between-cluster distance are preferred. It can be confirmed clearly in Theorem 2 that the genes having a higher WLM s in this study's method is able to simultaneously minimize the within-cluster distance and the maximize between-cluster distance.
According to Theorem 1, , making WLM s higher is equivalent to maximizing the inner weight w k and in minimizing the outer weight w k_out , that is to say, each community of the weighted sample graph has a larger w k and a smaller w k_out .
Given the selected gene subset S, the candidate gene g, and the weighted sample graph inS ∪ ggenes space, then: The gene g with a larger increment of WLM s (S ∪ g) is more discriminative.
The proof is seen in the Appendix section. Therefore, J(C, μ) in S ∪ g is minimizing while the WLM s of WSG in S ∪ g gets a higher value. This finding indicates that genes selected by this study's method are able to minimize the within-cluster distance (large w k ) and maximize the between-cluster distance (small w k_out ). It is considered that the gene subset with a higher WLM s is more relevant within its class label, which not only minimizes the within-cluster distance, but also maximizes the between-cluster distance.