Abstract
Alkaline anion exchange membrane (AEM) electrolysers to produce hydrogen from water are still at an early stage of development, and their performance is far lower than that of systems based on proton exchange membranes. Here, we report an ammonium-enriched anion exchange ionomer that improves the performance of an AEM electrolyser to levels approaching that of state-of-the-art proton exchange membrane electrolysers. Using rotating-disk electrode experiments, we show that a high pH (>13) in the electrode binder is the critical factor for improving the activity of the hydrogen- and oxygen-evolution reactions in AEM electrolysers. Based on this observation, we prepared and tested several quaternized polystyrene electrode binders in an AEM electrolyser. Using the binder with the highest ionic concentration and a NiFe oxygen evolution catalyst, we demonstrated performance of 2.7 A cm−2 at 1.8 V without a corrosive circulating alkaline solution. The limited durability of the AEM electrolyser remains a challenge to be addressed in the future.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 digital issues and online access to articles
$119.00 per year
only $9.92 per issue
Rent or buy this article
Prices vary by article type
from$1.95
to$39.95
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The authors declare that the data supporting the findings of this study are available within the paper, Supplementary Information and Source Data files. Further data beyond the immediate results presented here are available from the corresponding authors upon reasonable request.
References
Abbasi, R. et al. A roadmap to low-cost hydrogen with hydroxide exchange membrane electrolyzers. Adv. Mater. 31, 1805876 (2019).
Vincent, I. & Bessarabov, D. Low cost hydrogen production by anion exchange membrane electrolysis: a review. Renew. Sustain. Energy Rev. 81, 1690–1704 (2018).
Buttler, A. & Spliethoff, H. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: a review. Renew. Sustain. Energy Rev. 82, 2440–2454 (2018).
Seh, Z. W. et al. Combining theory and experiment in electrocatalysis: insights into matrials design. Science 355, eaad4998 (2017).
Zeng, K. & Zhang, D. K. Recent progress in alkaline water electrolysis for hydrogen production and applications. Prog. Energy Combust. Sci. 36, 307–326 (2010).
Schmidt, O. et al. Future cost and performance of water electrolysis: an expert elicitation study. Int. J. Hydrog. Energy 42, 30470–30492 (2017).
Gulzow, E. & Schulze, M. Long-term operation of AFC electrodes with CO2 containing gases. J. Power Sources 127, 243–251 (2004).
Gulzow, E. Alkaline fuel cells: a critical view. J. Power Sources 61, 99–104 (1996).
Naughton, M. S., Brushett, F. R. & Kenis, P. J. A. Carbonate resilience of flowing electrolyte-based alkaline fuel cells. J. Power Sources 196, 1762–1768 (2011).
Bernt, M. & Gasteiger, H. A. Influence of ionomer content in IrO2/TiO2 electrodes on PEM water electrolyzer performance. J. Electrochem. Soc. 163, F3179–F3189 (2016).
Lewinski, K. A., van der Vliet, D. F. & Luopa, S. M. NSTF advances for PEM electrolysis—the effect of alloying on activity of NSTF electrolyzer catalysts and performance of NSTF based PEM electrolyzers. ECS Trans. 69, 893–917 (2015).
Babic, U., Suermann, M., Buehi, F. N., Gubler, L. & Schmidt, T. J. Review-identifying critical gaps for polymer electrolyte water electrolysis development. J. Electrochem. Soc. 164, F387–F399 (2017).
Li, H. et al. Effects of operating conditions on performance of high-temperature polymer electrolyte water electrolyzer. J. Power Sources 318, 192–199 (2016).
Barbir, F. PEM electrolysis for production of hydrogen from renewable energy sources. Sol. Energy 78, 661–669 (2005).
Ayers, K. E. et al. Characterization of anion exchange membrane technology for low cost electrolysis. ECS Trans. 45, 121–130 (2013).
Hickner, M. A., Herring, A. M. & Coughlin, E. B. Anion exchange membranes: current status and moving forward. J. Polym. Sci. Pol. Phys. 51, 1727–1735 (2013).
Varcoe, J. R. et al. Anion-exchange membranes in electrochemical energy systems. Energy Environ. Sci. 7, 3135–3191 (2014).
Park, E. J. & Kim, Y. S. Quaternized aryl ether-free polyaromatics for alkaline membrane fuel cells: synthesis, properties, and performance—a topical review. J. Mater. Chem. A 6, 15456–15477 (2018).
Niether, C. et al. Improved water electrolysis using magnetic heating of FeC–Ni core–shell nanoparticles. Nat. Energy 3, 476–483 (2018).
Suntivich, J., May, K. J., Gasteiger, H. A., Goodenough, J. B. & Shao-Horn, Y. A perovskite oxide optimized for oxygen evolution catalysis from molecular orbital principles. Science 334, 1383–1385 (2011).
Zhao, S. L. et al. Ultrathin metal–organic framework nanosheets for electrocatalytic oxygen evolution. Nat. Energy 1, 16184 (2016).
Kaczur, J. J., Yang, H. Z., Liu, Z. C., Sajjad, S. A. & Masel, R. I. Carbon dioxide and water electrolysis using new alkaline stable anion membranes. Front. Chem. 6, 263 (2018).
Kraglund, M. R. et al. Ion-solvating membranes as a new approach towards high rate alkaline electrolyzers. Energy Environ. Sci. 12, 3313–3318 (2019).
Leng, Y. J. et al. Solid-state water electrolysis with an alkaline membrane. J. Am. Chem. Soc. 134, 9054–9057 (2012).
Parrondo, J. et al. Degradation of anion exchange membranes used for hydrogen production by ultrapure water electrolysis. RSC Adv. 4, 9875–9879 (2014).
Pandiarajan, T., Berchmans, L. J. & Ravichandran, S. Fabrication of spinel ferrite based alkaline anion exchange membrane water electrolysers for hydrogen production. RSC Adv. 5, 34100–34108 (2015).
Xiao, L. et al. First implementation of alkaline polymer electrolyte water electrolysis working only with pure water. Energy Environ. Sci. 5, 7869–7871 (2012).
Fan et al. Poly(bis-arylimidazoliums) possessing high hydroxide ion exchange capacity and high alkaline stability. Nat. Comm. 10, 2306 (2019).
Omasta, T. J. et al. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs. Energy Environ. Sci. 11, 551–558 (2018).
Maurya, S. et al. Rational design of polyaromatic ionomers for alkaline membrane fuel cells with >1 W cm–2 power density. Energy Environ. Sci. 11, 3283–3291 (2018).
Wang, J. et al. Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells. Nat. Energy 4, 392–398 (2019).
Huang, G. et al. Composite poly(norbornene) anion conducting membrnaes for achieving durability, water management and high power (3.4 W/cm2) in hydrogen/oxygen alkaline fuel cells. J. Electrochem. Soc. 166, F637–F644 (2019).
Chung, H. T., Martinez, U., Chlistunoff, J., Matanovic, I. & Kim, Y. S. Cation-hydroxide-water co-adsorption inhibits the alkaline hydrogen oxidation reaction. J. Phys. Chem. Lett. 7, 4464–4469 (2016).
Dumont, J. H. et al. Unusally high concentration of alkyl ammonium hydroxide in the cation-dydroxide-water coadsorbed layer on Pt. ACS Appl. Mater. Interfaces 12, 1825–1831 (2020).
Trzesniewski, B. J. et al. In situ observation of active oxygen species in Fe-containing Ni-based oxygen evolution catalysts: the effect of pH on electrochemical activity. J. Am. Chem. Soc. 137, 15112–15121 (2015).
Kraglund, M. R. et al. Zero-gap alkaline water electrolysis using ion-solvating polymer electrolyte membranes at reduced KOH concentrations. J. Electrochem. Soc. 163, F3125–F3131 (2016).
Li, D. et al. Phenyl oxidation impacts the durability of alkaline membrane water electrolyzer. ACS Appl. Mater. Interfaces 11, 9696–9701 (2019).
Matanovic, I. et al. Adsorption of polyaromatic backbone impacts the performance of anion exchange membrane fuel cells. Chem. Mater. 31, 4195–4204 (2019).
Maurya, S., Fujimoto, C. H., Hibbs, M. R., Villarrubia, C. N. & Kim, Y. S. Toward improved alkaline membrane fuel cell performance using quaternized aryl-ether free polyaromatics. Chem. Mater. 30, 2188–2192 (2018).
Li, D., Chung, H. T., Maurya, S., Matanovic, I. & Kim, Y. S. Impact of ionomer adsorption on alkaline hydrogen oxidation activity and fuel cell performance. Curr. Opin. Electrochem. 12, 189–195 (2018).
Poynton, S. D. et al. Preparation of radiation-grafted powders for use as anion exchange ionomers in alkaline polymer electrolyte fuel cells. J. Mater. Chem. A 2, 5124–5130 (2014).
Jeon, J. Y. et al. Synthesis of aromatic anion exchange membranes by Friedel-Crafts bromoalkylation and cross-linking of polystyrene block copolymers. Macromolecules 52, 2139–2147 (2019).
Lee, W. H., Kim, Y. S. & Bae, C. Robust hydroxide ion conducting poly(biphenyl alkylene)s for alkaline fuel cell membranes. ACS Macro Lett. 4, 814–818 (2015).
Zhu, L., Yu, X. D. & Hickner, M. A. Exploring backbone-cation alkyl spacers for multi-cation side chain anion exchange membranes. J. Power Sources 375, 433–441 (2018).
Wang, J. H. et al. Structure-property relationships in hydroxide-exchange membranes with cation strings and high ion-exchange capacity. ChemSusChem 8, 4229–4234 (2015).
Hibbs, M. R. Alkaline stability of poly(phenylene)-based anion exchange membranes with various cations. J. Polym. Sci. B Polym. Phys. 51, 1736–1742 (2013).
Park, E. J. et al. Alkaline stability of quaternized Diels-Alder polyphenylenes. Macromolecules 52, 5419–5428 (2019).
Choe, Y. K. et al. Alkaline stability of benzyl trimethyl ammonium functionalized polyaromatics: a computational and experimental study. Chem. Mater. 26, 5675–5682 (2014).
Fu, S. F. et al. Ultrafine and highly disordered Ni2Fe1 nanofoams enabled highly efficient oxygen evolution reaction in alkaline electrolyte. Nano Energy 44, 319–326 (2018).
Kabir, S. et al. Platinum group metal-free NiMo hydrogen oxidation catalysts: high performance and durability in alkaline exchange membrane fuel cells. J. Mater. Chem. A 5, 24433–24443 (2017).
Lee, K.-S., Spendelow, J. S., Choe, Y.-K., Fujimoto, C. & Kim, Y. S. An operationally flexible fuel cell based on quaternary ammonium–biphosphate ion pairs. Nat. Energy 1, 16120 (2016).
Gao, H., Li, J. & Lian, K. Alkaline quaternary ammonium hydroxides and their polymer electrolytes for electrochemical capacitors. RSC Adv. 4, 21332–21339 (2014).
Acknowledgements
We gratefully acknowledge research support from the HydroGEN Advanced Water Splitting Materials Consortium, established as part of the Energy Materials Network under the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Fuel Cell Technologies Office (program manager: D. Peterson). Los Alamos National Laboratory is operated by Triad National Security under the US Department of Energy, under contract no. 89233218CNA000001. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, a wholly owned subsidiary of Honeywell International, for the US Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. Y.L. acknowledges research support from the JCDREAM. We thank A. Dattelbaum for constructive criticism of the manuscript.
Author information
Authors and Affiliations
Contributions
Y.S.K. designed the experiments. D.L. carried out the electrochemical analysis and electrolyser test. E.J.P., E.D.B and C.F. synthesized the polymeric materials. W.Z., Q.S., Y.Z., H.T. and Y.L. synthesized and characterized the NiFe catalysts. A.S. and B.Z. synthesized and characterized the NiMo/C catalysts. D.L., E.J.P., W.Z., Y.L., A.S. and Y.S.K. contributed to writing the article. Y.S.K. initiated the collaborative project. Y.L., B.Z. and Y.S.K. supervised and guided the work.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Figs. 1–12, Tables 1–2 and refs. 1–2.
Source data
Source Data Fig. 2
Electrochemical data for plotting.
Source Data Fig. 4
Electrochemical data for plotting.
Source Data Fig. 5
Electrochemical data for plotting.
Source Data Fig. 6
Electrochemical data for plotting.
Rights and permissions
About this article
Cite this article
Li, D., Park, E.J., Zhu, W. et al. Highly quaternized polystyrene ionomers for high performance anion exchange membrane water electrolysers. Nat Energy 5, 378–385 (2020). https://doi.org/10.1038/s41560-020-0577-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41560-020-0577-x
This article is cited by
-
An operationally broadened alkaline water electrolyser enabled by highly stable poly(oxindole biphenylene) ion-solvating membranes
Nature Energy (2024)
-
Multi-scale physics of bipolar membranes in electrochemical processes
Nature Chemical Engineering (2024)
-
Optimizing membrane pretreatment for improved performance of anion exchange membrane-unitized regenerative fuel cells
Journal of Applied Electrochemistry (2024)
-
Efficiency and consistency enhancement for alkaline electrolyzers driven by renewable energy sources
Communications Engineering (2023)
-
Upscaled production of an ultramicroporous anion-exchange membrane enables long-term operation in electrochemical energy devices
Nature Communications (2023)