Reversible two-way tuning of thermal conductivity in an end-linked star-shaped thermoset

Polymeric thermal switches that can reversibly tune and significantly enhance their thermal conductivities are desirable for diverse applications in electronics, aerospace, automotives, and medicine; however, they are rarely achieved. Here, we report a polymer-based thermal switch consisting of an end-linked star-shaped thermoset with two independent thermal conductivity tuning mechanisms—strain and temperature modulation—that rapidly, reversibly, and cyclically modulate thermal conductivity. The end-linked star-shaped thermoset exhibits a strain-modulated thermal conductivity enhancement up to 11.5 at a fixed temperature of 60 °C (increasing from 0.15 to 2.1 W m−1 K−1). Additionally, it demonstrates a temperature-modulated thermal conductivity tuning ratio up to 2.3 at a fixed stretch of 2.5 (increasing from 0.17 to 0.39 W m−1 K−1). When combined, these two effects collectively enable the end-linked star-shaped thermoset to achieve a thermal conductivity tuning ratio up to 14.2. Moreover, the end-linked star-shaped thermoset demonstrates reversible tuning for over 1000 cycles. The reversible two-way tuning of thermal conductivity is attributed to the synergy of aligned amorphous chains, oriented crystalline domains, and increased crystallinity by elastically deforming the end-linked star-shaped thermoset.


Statistics
For all statistical analyses, confirm that the following items are present in in the figure legend, table legend, main text, or or Methods section.

n/a Confirmed
The exact sample size (n) for each experimental group/condition, given as as a discrete number and unit of of measurement A statement on on whether measurements were taken from distinct samples or or whether the same sample was measured repeatedly The statistical test(s) used AND whether they are one-or or two-sided Only common tests should be described solely by name; describe more complex techniques in the Methods section.

A description of of all covariates tested
A description of of any assumptions or or corrections, such as as tests of of normality and adjustment for multiple comparisons A full description of of the statistical parameters including central tendency (e.g.means) or or other basic estimates (e.g.regression coefficient) AND variation (e.g. standard deviation) or or associated estimates of of uncertainty (e.g.confidence intervals) For null hypothesis testing, the test statistic (e.g.F, t, r) with confidence intervals, effect sizes, degrees of of freedom and P value noted Give P values as exact values whenever suitable.
For Bayesian analysis, information on on the choice of of priors and Markov chain Monte Carlo settings For hierarchical and complex designs, identification of of the appropriate level for tests and full reporting of of outcomes Estimates of of effect sizes (e.g.Cohen's d, Pearson's r), ), indicating how they were calculated Our web collection on statistics for biologists contains articles on many of the points above.

Software and code
Policy information about availability of of computer code

Data analysis
For manuscripts utilizing custom algorithms or or software that are central to to the research but not yet described in in published literature, software must be be made available to to editors and reviewers.We We strongly encourage code deposition in in a community repository (e.g.GitHub).See the Nature Portfolio guidelines for submitting code & software for further information.

Data Policy information about availability of of data
All manuscripts must include a data availability statement This statement should provide the following information, where applicable: -Accession codes, unique identifiers, or or web links for publicly available datasets -A description of of any restrictions on on data availability -For clinical datasets or or third party data, please ensure that the statement adheres to to our policy Xuanhe Zhao 05/09/2024 No No software used for data collection

All data analyses have conducted by by using custom codes based on on MATLAB
The data relevant to to this study including thermal conductivity measurements, X-ray characterizations, and molecular dynamics simulations are comprehensively detailed within the main text and the supplementary information.Additionally, the original datasets have been made publicly accessible via the public repository figshare (https://figshare.com) and are available here: https://doi.org/10.6084/m9.figshare.25287391.Data relevant to to this study is is available from the author upon request.

Reporting on sex and gender
Reporting on race, ethnicity, or other socially relevant groupings

Recruitment
Ethics oversight Note that full information on the approval of the study protocol must also be provided in the manuscript.

Field-specific reporting
Please select the one below that is the best fit for your research.If you are not sure, read the appropriate sections before making your selection.

Life sciences Behavioural & social sciences Ecological, evolutionary & environmental sciences
For a reference copy of the document with all sections, see nature.com/documents/nr-reporting-summary-flat.pdf

Life sciences study design
All studies must disclose on these points even when the disclosure is negative.

Blinding
Behavioural & social sciences study design All studies must disclose on these points even when the disclosure is negative.

Study description
Use the terms sex (biological attribute) and gender (shaped by social and cultural circumstances) carefully in order to avoid confusing both terms.Indicate if findings apply to only one sex or gender; describe whether sex and gender were considered in study design; whether sex and/or gender was determined based on self-reporting or assigned and methods used.Provide in the source data disaggregated sex and gender data, where this information has been collected, and if consent has been obtained for sharing of individual-level data; provide overall numbers in this Reporting Summary.Please state if this information has not been collected.
Report sex-and gender-based analyses where performed, justify reasons for lack of sex-and gender-based analysis.
Please specify the socially constructed or socially relevant categorization variable(s) used in your manuscript and explain why they were used.Please note that such variables should not be used as proxies for other socially constructed/relevant variables (for example, race or ethnicity should not be used as a proxy for socioeconomic status).Provide clear definitions of the relevant terms used, how they were provided (by the participants/respondents, the researchers, or third parties), and the method(s) used to classify people into the different categories (e.g.self-report, census or administrative data, social media data, etc.) Please provide details about how you controlled for confounding variables in your analyses.
Describe the covariate-relevant population characteristics of the human research participants (e.g.age, genotypic information, past and current diagnosis and treatment categories).If you filled out the behavioural & social sciences study design questions and have nothing to add here, write "See above." Describe how participants were recruited.Outline any potential self-selection bias or other biases that may be present and how these are likely to impact results.
Identify the organization(s) that approved the study protocol.
Describe how sample size was determined, detailing any statistical methods used to predetermine sample size OR if no sample-size calculation was performed, describe how sample sizes were chosen and provide a rationale for why these sample sizes are sufficient.
Describe any data exclusions.If no data were excluded from the analyses, state so OR if data were excluded, describe the exclusions and the rationale behind them, indicating whether exclusion criteria were pre-established.
Describe the measures taken to verify the reproducibility of the experimental findings.If all attempts at replication were successful, confirm this OR if there are any findings that were not replicated or cannot be reproduced, note this and describe why.
Describe how samples/organisms/participants were allocated into experimental groups.If allocation was not random, describe how covariates were controlled OR if this is not relevant to your study, explain why.
Describe whether the investigators were blinded to group allocation during data collection and/or analysis.If blinding was not possible, describe why OR explain why blinding was not relevant to your study.
Briefly describe the study type including whether data are quantitative, qualitative, or mixed-methods (e.g.qualitative cross-sectional, quantitative experimental, mixed-methods case study).

nature portfolio | reporting summary
April 2023

Disturbance
Reporting for specific materials, systems and methods We We require information from authors about some types of of materials, experimental systems and methods used in in many studies.Here, indicate whether each material, system or or method listed is is relevant to to your study.If If you are not sure if if a list item applies to to your research, read the appropriate section before selecting a response.Describe any disturbance caused by the study and how it was minimized.
Describe the methods by which all novel plant genotypes were produced.This includes those generated by transgenic approaches, gene editing, chemical/radiation-based mutagenesis and hybridization.For transgenic lines, describe the transformation method, the number of independent lines analyzed and the generation upon which experiments were performed.For gene-edited lines, describe the editor used, the endogenous sequence targeted for editing, the targeting guide RNA sequence (if applicable) and how the editor was applied.was applied.was applied.
Report on the source of all seed stocks or other plant material used.If applicable, state the seed stock centre and catalogue number.If plant specimens were collected from the field, describe the collection location, date and sampling procedures.
Describe any authentication procedures for each seed stock used or novel genotype generated.Describe any experiments used to Describe any authentication procedures for each seed stock used or novel genotype generated.Describe any experiments used to Describe any authentication procedures for each seed stock used or novel genotype generated.Describe any experiments used to assess the effect of a mutation and, where applicable, how potential secondary effects (e.g.second site T-DNA insertions, mosiacism, off-target gene editing) were examined.

Materials
issue, and any identifying information).