Abstract
IN two previous papers,1 I have mentioned that water at ordinary temperature is not a suitable liquid for forming “liquid drops floating on the same liquid surface”. In August 1930, however, I observed at Den Kund (Dalhousie hills), at a height of about 1000 ft. above the sea-level, that water is quite a suitable liquid for easy formation of either primary2 or secondary drops. The life of these drops is also found to be longer. The splashing gives easy formation of secondary drops of quite a long life. The temperature of the water was about 34° F. The surface tension of water at this temperature is 76.53 dynes per cm., and viscosity 0.0179 c.g.s. units.
Similar content being viewed by others
Article PDF
References
(a) "Liquid Drops floating on the Same Liquid Surface", J. B. Seth, C. Anand, and L. D. Mahajan, Phil. Mag., Feb. 1929. (b) "The Effect of the Surrounding Medium on the Life of Liquid Drops floating on the Same Liquid Surface", L. D. Mahajan, Phil. Mag., London, 1930 (in the press).
See Phil. Mag., London, Seventh Series, No. 42, Feb. 1929, page 248.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
MAHAJAN, L. Liquid Drops on the Same Liquid Surface. Nature 126, 761 (1930). https://doi.org/10.1038/126761c0
Issue Date:
DOI: https://doi.org/10.1038/126761c0
This article is cited by
-
Formation of secondary drops during impact interaction of a drop with a liquid surface
Journal of Applied Mechanics and Technical Physics (2005)
-
Liquid Drops on the Same Liquid Surface
Nature (1931)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.