Iodine staining as a useful probe for distinguishing insulin amyloid polymorphs

Hiramatsu, Takato; Yamamoto, Naoki; Ha, Seongmin; Masuda, Yuki; Yasuda, Mitsuru; Ishigaki, Mika; Yuzu, Keisuke; Ozaki, Yukihiro; Chatani, Eri

doi:10.1038/s41598-020-73460-y

Download PDF

Article
Open access
Published: 07 October 2020

Iodine staining as a useful probe for distinguishing insulin amyloid polymorphs

Takato Hiramatsu¹,
Naoki Yamamoto²,
Seongmin Ha¹,
Yuki Masuda¹,
Mitsuru Yasuda³,
Mika Ishigaki^4,5,
Keisuke Yuzu¹,
Yukihiro Ozaki^3,6 &
…
Eri Chatani¹

Scientific Reports volume 10, Article number: 16741 (2020) Cite this article

5039 Accesses
8 Citations
3 Altmetric
Metrics details

Subjects

Abstract

It is recently suggested that amyloid polymorphism, i.e., structural diversity of amyloid fibrils, has a deep relationship with pathology. However, its prompt recognition is almost halted due to insufficiency of analytical methods for detecting polymorphism of amyloid fibrils sensitively and quickly. Here, we propose that iodine staining, a historically known reaction that was firstly found by Virchow, can be used as a method for distinguishing amyloid polymorphs. When insulin fibrils were prepared and iodine-stained, they exhibited different colors depending on polymorphs. Each of the colors was inherited to daughter fibrils by seeding reactions. The colors were fundamentally represented as a sum of three absorption bands in visible region between 400 and 750 nm, and the bands showed different titration curves against iodine, suggesting that there are three specific iodine binding sites. The analysis of resonance Raman spectra and polarization microscope suggested that several polyiodide ions composed of I₃⁻ and/or I₅⁻ were formed on the grooves or the edges of β-sheets. It was concluded that the polyiodide species and conformations formed are sensitive to surface structure of amyloid fibrils, and the resultant differences in color will be useful for detecting polymorphism in a wide range of diagnostic samples.

Highly accurate protein structure prediction with AlphaFold

Article Open access 15 July 2021

Imaging the dynamics of messenger RNA with a bright and stable green fluorescent RNA

Article 23 May 2024

Single-site iron-anchored amyloid hydrogels as catalytic platforms for alcohol detoxification

Article Open access 13 May 2024

Amyloid fibrils are protein aggregates associated with many amyloidosis and neurodegenerative diseases including Alzheimer’s disease (AD) and Parkinson’s disease^1,2. While straight unbranched morphology and cross-β structure are known as a common basic structure of amyloid fibrils, it was revealed that amyloid fibrils show structural variations even from the same protein; this phenomenon is referred to as amyloid polymorphism^3,4,5. Variations in the number and the arrangement of protofilaments are an example of polymorphism^6,7, and more microscopic variations at the level of secondary or tertiary structure of polypeptide chains have been also identified in many proteins^{8,9,10,11,12,13,14}. In studies of prion diseases, different physicochemical properties among amyloid polymorphs, such as fragility and growth rates, have been suggested to be the molecular basis underlying the presence and propagation of distinct prion strains¹⁵. While oligomer species have been proposed as major cytotoxic agents especially in the case of AD, amyloid polymorphs also exert different neurotoxic effects on living cells⁹, and it has recently been suggested that tau protein adopted distinct amyloid conformations in the human brain in different diseases¹⁴. Although further researches are needed to elucidate the pathological significance, the formation of such conformationally distinct amyloid fibrils now attracts much attention for understanding pathogenic mechanisms of amyloid-related diseases and developing curative treatments in terms of protein structure.

Amyloid polymorphs have been successfully reproduced in vitro depending on growth conditions, e.g., temperature¹⁵, protein concentration¹⁶, and solvent¹⁷; however, the most critical factors have not been fully revealed yet⁵. Subtle variations in amino acid sequence among different species also result in different fibril structures¹⁸, although it does not correspond to amyloid polymorphism because amino acid sequences are not the same. In another case, distinct fibril structures can be also induced in a stochastic manner even under the same conditions¹⁹. Recently, detailed structural investigations of amyloid fibrils are progressing by using several powerful methods, such as solid-state NMR (ssNMR)^9,11,20, cryo-electron microscopy (cryo-EM)^12,13,14,21, and X-ray crystallography⁸. The clarified structures have revealed distinct molecular structures of amyloid polymorphs. The relevance of amyloid polymorphism to in vivo pathology has also been clarified by the structural investigation of Aβ_1-40 amyloid fibrils that were prepared with seeds derived from brain tissues of AD patients with distinct clinical histories²⁰. However, the use of these techniques requires a lot of labor and time and therefore making them unsuitable for high throughput use. If an easy-to-use method of analyzing fibril structures can be developed, it will become a great help to cover a wide range of samples including pathological tissues as targets of investigations, thereby contributing to progress toward a unified understanding of relationships between fibril structures and pathologies.

Here, we focus on iodine as a molecular probe that recognizes structural polymorphs of amyloid fibrils. Iodine staining is a coloring reaction that occurs by complexing iodine with crystalline compounds or polymers. The molecular origin of the color is the formation and subsequent alignment and orientation of polyiodide ions. An iodine–starch complex is a good example, and from the crystal structure of iodine-doped α-cyclodextrin, it is suggested that linear chains of pentaiodide ions (I₅⁻) are encapsulated in channel-like voids in the center of the helical polysaccharides^22,23. The color formed by iodine is considered to originate from the electronic transition within a polyiodide ion²⁴. The coloration by polyiodide ions is also observed in iodine-doped synthetic polymers such as polyacetylene²⁵, nylon 6²⁶ and polyvinyl alcohol²⁷. Interestingly, colors formed by iodine staining vary sensitively depending on constituting polyiodide ions and their coordination patterns inside the complex structures^28,29. From these observations, it is postulated that the color exhibited by iodine staining will serve as a sensitive indicator of structures of host compounds to which iodine binds. With regard to iodine staining of amyloid fibrils, Virchow firstly found that tissue deposits of amyloid fibrils were stained with iodine³⁰. However, soon after this pioneering discovery in the 1850s, fluorescent dyes such as Congo Red and thioflavin S or thioflavin T (ThT) with higher detection sensitivity replaced iodine for diagnosis of amyloidosis^31,32,33, and molecular mechanisms underlying iodine reaction have almost not been studied; indeed, there is only one report by Dzwolak¹⁰.

In this work, we have performed iodine staining of human insulin amyloid fibrils using three polymorphs obtained under different additive conditions (i.e., in the presence of NaCl or sodium dodecyl sulfate (SDS) and in the absence of additives). Insulin is a hormone protein associated with iatrogenic amyloidosis². It has been also used as a good model for amyloid researches in a past few decades³⁴. As a result of the characterization of color properties of each type of insulin fibrils by ultraviolet–visible (UV–Vis) spectra, we have found that the color significantly varied depending on the polymorphs. Each color conserved even after the self-seeding reaction, demonstrating that iodine staining tracked the propagation of amyloid polymorphs. Polyiodide ions formed by iodine staining were characterized by resonance Raman spectra and titration experiments. Furthermore, iodine-stained insulin spherulites were observed by polarization microscopy to gain insights into the binding manner of the polyiodide ions to amyloid fibrils. It was proposed that different polyiodide species were formed depending on the surface structures of amyloid fibrils, which resulted in different colors. From the results obtained, molecular mechanisms of iodine staining of amyloid fibrils and future perspectives for the use of iodine staining as a probe for amyloid polymorphism will be discussed.

Results

Formation of polymorphic insulin amyloid fibrils

We firstly prepared amyloid fibrils of human insulin used for iodine staining. For the spontaneous formation of insulin amyloid fibrils, acidic pH and high temperature are typically used as amyloidogenic conditions, under which insulin hexamers are dissociated and molecular conformation become disordered³⁴. In this work, 25 mM HCl and 65 °C were selected as conditions for spontaneous fibrillation, and amyloid polymorphs were attempted to be obtained by using two types of additives, NaCl and SDS. As a result of incubating the sample solutions for 24 h, ThT fluorescence exhibited different intensity among the amyloid fibrils formed (Fig. 1a, blue bars). In light of a previous observation that the affinity and stoichiometry between ThT and amyloid fibrils varied depending on fibril structures³⁵, the different fluorescence intensity suggests that amyloid polymorphs were formed. As for a possible molecular mechanism explaining the additive-induced formation of the polymorphs, the modulation of side-chain interactions that would affect nucleus structure is typically expected. It does not seem so intense in the present case as no significant structural changes were observed when the difference in the initial structure of the insulin molecule was analyzed using far-UV CD spectroscopy (Fig. S1). We refer to the amyloid fibrils generated in the absence and presence of NaCl and SDS as no-salt fibrils, NaCl fibrils, and SDS fibrils, respectively.

We next performed seed-dependent fibril formation with the amyloid fibrils formed as seeds to produce daughter fibrils. Here, all reactions were performed without additives to unify solvent conditions, and 37 °C was chosen as reaction temperature to avoid simultaneous spontaneous fibrillation. As a result, the daughter fibrils all showed higher intensity than that of the parent fibrils. This result suggests that the amyloid fibrils self-propagated selectively while non-fibrillar aggregates contained in the parent fibril samples did not. Even though ThT fluorescence intensity increased overall, the relative differences were still maintained in the daughter generation (Fig. 1a, orange bars). Furthermore, significant differences in peak wavelength were found in addition to the differences in intensity in the ThT fluorescence spectra (Fig. 1b). These observations strongly support the formation of amyloid polymorphs.

We further analyzed morphology and secondary structure of the amyloid fibrils generated from the three different additive conditions by atomic force microscopy (AFM) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. AFM images showed that NaCl fibrils were thicker (9.5 ± 2.7 nm; n = 8) compared to SDS (4.2 ± 1.7 nm; n = 8) and no-salt fibrils (3.5 ± 1.7 nm; n = 8) (Fig. 1c). On the other hand, when ATR-FTIR spectra were analyzed, all fibrils exhibited a main peak at 1630 cm⁻¹ in amide I region, which was assigned to β-sheet structure (Fig. 1d; upper panel)³⁶. Second derivatives of the spectra also showed similar peak positions of minima among NaCl, SDS, and no-salt fibrils. However, differences at around 1670 cm⁻¹ and 1710–1750 cm⁻¹, which are assigned to β-turn and carboxyl groups of side chains, respectively, were observed (Fig. 1d; lower panel)³⁶. This result suggests that polymorphism was derived from differences in turn and/or higher-order structures including hierarchical architecture, while the main cross-β structure was very similar.

Color formation by iodine staining of insulin amyloid fibrils

To investigate iodine staining of amyloid fibrils, we analyzed changes in colors by mixing iodine solution with NaCl, SDS, or no-salt fibrils. The iodine solution, in which three types of iodine species, I⁻, I₂, and I₃⁻, are present in equilibrium, shows yellowish color, and the absorption spectrum of the iodine solution shows two major peaks and one broad one derived from I₃⁻ and I₂, respectively^37,38 (Fig. S2). When amyloid fibrils were added to the iodine solution, reddish or bluish color appeared for all types of fibrils (Fig. 2a). Native insulin mixed with iodine solution, on the other hand, showed quite a similar UV–Vis absorption spectrum to that observed for the iodine solution-only control (Fig. S2a), suggesting that iodine staining occurs specifically to fibril structures. Interestingly, the color varied among types of fibrils, and absorption spectra in UV–Vis region showed different shapes in visible region (400–750 nm) (Fig. 2b). The spectra as well as their second derivatives showed that iodine-stained NaCl fibrils had a major peak at around 550 nm (Fig. 2b, red line), whereas iodine-stained SDS and no-salt fibrils had one at around 650 nm (Fig. 2b, blue and orange lines, respectively). Although contamination of salts from the parent fibrils may affect the spectral shape, this was ruled out by supporting experiments, in which it was confirmed that the spectra did not change even after complete desalting of NaCl and SDS fibrils or the addition of salts to no-salt fibrils (Fig. S3).

We next performed spectral deconvolution to discuss absorption bands constructing the experimental spectrum. Each spectrum was replotted against wavenumber so that the analysis was performed in a manner proportional to energy, and then was reproduced by a sum of Gaussian distributions according to the following model function;

$${A}\left(\nu \right)=\sum_{j=1}^{n}{\text{A}}_{j}\mathrm{exp}\left\{-\frac{{\left(\nu -{\nu }_{j}\right)}^{2}}{2{{\sigma }_{j}}^{2}}\right\}+{b}_{0}+{b}_{1}\nu$$

(1)

where ${\text{A}}_{j}$ and ${\nu }_{j}$ represent amplitude, center wavenumber of the jth absorption band, respectively, and ${\sigma }_{j}$ is a coefficient related to the full width at half-maximum (FWHM) of the jth absorption band, and FWHM is described as $2{\sigma }_{j}\sqrt{2\mathrm{ln}2}$. ${b}_{0}$ and ${b}_{1}$ are intercept and slope of the baseline for Rayleigh scattering caused by fibrils, respectively. Curve fitting was performed until both measured and second derivative spectra were reproduced well. For stable and accurate convergence, the wavenumber and FWHM of the most prominent band in visible region were fixed to values read from the local minimum and its distance to the inflection point in the second derivative spectrum.

As a result, all of the absorption spectra were reproduced successfully by approximating with six Gaussians (i.e., n = 6) and a linear baseline (Fig. 3). Although hardly recognizable in the second derivative spectrum (see Fig. 2b), the installation of another band between 23,000 and 25,000 cm⁻¹ (i.e., between 400 and 435 nm), which was conceived to be derived from I₂ molecules (see Fig. S2)^37,38, certainly improved the reproduction of the experimental spectra. In the case of no-salt fibrils, although the peak at around 650 nm appeared less significant than that of SDS fibrils (Fig. 2b), the absorption band at 14,500 cm⁻¹ was identified (Fig. 3c). When the six Gaussian absorption bands were compared to the bands observed in the iodine solution (Fig. S2b), the three bands at higher wavenumbers (dashed lines in Fig. 3a-c) showed similar positions to those for the I₂ and I₃⁻ in the iodine solution (dashed lines in Fig. S2b). The remaining three absorption bands at lower wavenumbers, on the other hand, were observed only for the fibril-bound iodine (filled bands in Fig. 3a-c). It was thus suggested that the color formation by the iodine staining of amyloid fibrils was represented mainly by these three newly emerged absorption bands, although, in the cases of NaCl and SDS fibrils, the absorption band at ~ 25,000 cm⁻¹ was increased after iodine staining and thus is partly responsible for the color formation. The three newly emerged bands showed higher peak wavenumbers in NaCl fibrils compared to those of SDS and no-salt fibrils, and in SDS and no-salt fibrils, the relative intensities of the three bands were different while the peak positions were similar.

Tracking structural propagation of amyloid fibrils by iodine staining

To verify whether the intrinsic iodine colors can serve as a probe for the propagation of amyloid fibril structures, we tracked the time course of seed-dependent elongation by iodine staining (Fig. 4). In this experiment and thereafter, NaCl and SDS fibrils, which showed markedly distinct characteristics in terms of the positions of the three absorption bands, were subjected to the analyses. As seeds, the parent fibrils were used. When the color formation by iodine was examined by sampling the reaction mixture at different time points, absorption intensity in visible region gradually increased both in the NaCl and SDS fibrils as time advanced (Fig. 4a,c). Spectral deconvolution was successfully achieved by assuming six absorption bands with constant wavenumbers (Fig. S4). When the areas of the three absorption bands at lower wavenumbers were plotted against reaction time, all of them increased synchronously with the time-dependent increase of ThT fluorescence intensity (Fig. 4b,d), suggesting that the color developed in response to fibril elongation without changing its tone.

Characterization of polyiodide species responsible for visible color

According to studies of iodine-doped compounds, the molecular mechanism of visible color formation by iodine is due to the formation of polyiodide ions^39,40. In the case of iodine-doped amyloid fibrils, the formation of pentaiodide ions and several other oligoiodide ions was suggested by Dzwolak¹⁰. To identify polyiodide species formed on the amyloid fibrils analyzed in the present work, resonance Raman spectra were measured. Raman spectroscopy is a useful technique for detecting subunits of polyiodide chains in complexes with amylose^23,41,42 and other organic compounds^43,44,45,46. Here, two excitation wavelengths 514.5 nm (19,436 cm⁻¹) and 785 nm (12,739 cm⁻¹) were used; two out of the three absorption bands (red and green bands in Fig. 3a-c) are supposed to be excited with the 514.5 nm laser, and the remaining band (blue bands in Fig. 3a-c) is supposed to be excited with the 785 nm laser.

As a result, resonance Raman effects were observed for both NaCl and SDS fibrils, and characteristic Raman spectra with two strong peaks at around 110 cm⁻¹ and 160 cm⁻¹ were observed at both excitation wavelengths (Fig. 5). Based on a previous Raman study of the crystalline compounds containing triiodide or pentaiodide ions⁴³, the 110 cm⁻¹ and 160 cm⁻¹ peaks were assigned to I₃⁻ and I₅⁻, respectively. The present observation therefore suggests that the fundamental building blocks of polyiodide ions are I₃⁻ and I₅⁻. Unstained fibrils showed no significant peaks in the same way as those of iodine solution without fibrils (Fig. 5, dotted line), indicating that the peaks are derived from iodine species bound to the fibrils. Especially when excited at 514.5 nm, two weak bands were additionally observed at ~ 220 cm⁻¹ and ~ 320 cm⁻¹, which were assumed to be overtone bands of the I₃⁻ and I₅⁻ bands, respectively. A very weak combination band of the I₃⁻ and I₅⁻ bands was also found at around 270 cm⁻¹ for SDS fibrils, whereas it was undetectable for NaCl fibrils, probably due to low intensity of the 160 cm⁻¹ band. When excited at 785 nm, the overtone band of the I₅⁻ band and the combination band of the I₃⁻ and I₅⁻ bands were observed both for NaCl and SDS fibrils. When two spectra excited at different wavelengths were compared (i.e., between Fig. 5a,c or between Fig. 5b,d), the positions and intensity ratio of the I₃⁻ and I₅⁻ peaks at ~ 110 cm⁻¹ and ~ 160 cm⁻¹ were different in both types of fibrils. This observation suggests that the conformations and the composition ratio of the I₃⁻ and I₅⁻ subunits constituting the polyiodide ions vary among the absorption bands.

The Raman spectra were also compared between NaCl and SDS fibrils to see whether there are differences in the conformations and the composition ratio of polyiodide species, which would be responsible for the difference in color in iodine staining among the amyloid polymorphs. This comparison was performed using the spectra excited at 785 nm where only the same single absorption band is selectively resonated (Fig. 5c,d). As a result, the positions of the I₃⁻ and I₅⁻ peaks at ~ 110 cm⁻¹ and ~ 160 cm⁻¹ and the intensity ratio of these peaks were slightly different between NaCl and SDS fibrils. This observation suggests that different polyiodide ions are formed depending on the amyloid polymorphs.

Titration of iodine to insulin amyloid fibrils

We further performed titration experiments to analyze iodine concentration dependence of the absorption band intensities. With stepwise addition of the iodine solution to amyloid fibrils, gradual intensification of the absorption bands was observed both in NaCl and SDS fibrils. The absorption in the low wavenumber region finally saturated after the addition of excess amount of iodine (Fig. 6a,b). Interestingly, absorption intensity at lower wavenumbers grew slightly later compared to that at higher wavenumbers, and indeed, distinct shapes of the titration plots were observed when the areas (A(c)) of the three absorption bands in the low wavenumber region (the bands with filled area in Fig. S5) were plotted against iodine concentration c (Fig. 6c,d). The titration plots showed cooperative properties and as a result of curve fittings with Hill Equation⁴⁷,

$$A\left(c\right)=\frac{{A}_{\text{max}}{c}^{n}}{{K}_{\text A}+{c}^{n}}$$

(2)

where A_max, K_A, and n represent band area attained after saturation, iodine concentration at which half of the binding sites are occupied, and Hill coefficient, respectively, different parameters in their binding affinity and cooperativity were obtained among the three absorption bands both in NaCl (Fig. 6c) and SDS fibrils (Fig. 6d). This result suggests that there are at least three different iodine-binding sites. Furthermore, all plots exhibited n > 1, from which a cooperative mechanism was suggested in the iodine binding to amyloid fibrils. It is deduced that small iodide species, such as I₃⁻ and I⁻ with negligible absorption in visible region, initially bind and then facilitate subsequent iodine binding to form polyiodide ions showing visible color.

Investigation of the orientation of polyiodides on the surface of amyloid fibrils

It is often revealed that polyiodide chains formed by complexation of iodine/iodide with various compounds lie in an oriented manner^22,46,48. To gain insights into whether the polyiodides bound to amyloid fibrils have some specific orientation, a polarization property of the iodine-stained fibrils was investigated. Linear polyiodides ions have a transition moment in a direction parallel to their long axes⁴³, and thus the aligned polyiodides ions absorb polarized light, as seen in unidirectionally stretched films of iodine-doped polyvinyl alcohol⁴⁹. In this analysis, amyloid spherulites, a spherical hierarchical structure composed of radially oriented amyloid fibrils⁵⁰, were selected as a good model for evaluating the orientation of fibril-bound iodine molecules. Amyloid spherulites of insulin were formed, treated with iodine solution, and then observed by a microscope equipped with an analyzer to assess whether the transmitted light of the iodine-stained amyloid spherulites showes a polarized property.

As a result, the transmission microscope images of the iodine-stained amyloid spherulites showed two cone-shaped dark sections along the analyzer axis, and their direction changed with response to the rotation of the analyzer (Fig. 7). In contrast, no dark section was observed for unstained spherulites (Fig. S6), verifying that the polarized nature of the iodine-stained spherulites was derived from polyiodide. The direction of the dark sections and that of the analyzer axis coincided well, which suggests that polyiodide chains are oriented along the fibril axis given the radial orientation of fibril axes in the amyloid spherulite.

Discussion

We have investigated color properties of iodine-stained amyloid fibrils of human insulin mainly by using UV–Vis absorbance spectroscopy. When iodine molecules bound on the surface of the insulin fibrils, they showed clear coloration like iodine–starch reactions. An interesting feature of the iodine staining of amyloid fibrils was that different colors were observed among the three types of insulin amyloid fibrils (i.e., NaCl, SDS, and no-salt fibrils) upon the addition of iodine solution. The differences in color tone were spectroscopically demonstrated in visible region, and furthermore, the colors formed by iodine staining could track the propagation of amyloid fibril structures by seed-dependent growth reactions. The present observation suggests that iodine staining can serve as a new probe indicating structural polymorphs of insulin amyloid fibrils.

There are several chemical dyes that have been widely used for detection and tracking of amyloid fibril formation. The most widely used one is ThT, which exhibits enhanced fluorescence upon binding to amyloid fibrils. ThT has been used for many assays as well as extended applications such as microscopic observation of amyloid fibril growth and diagnosis of fibrils in tissue section^33,51,52. Several ThT derivatives with high affinity toward amyloid fibrils have also been designed, and recently, radioactively labeled Pittsburgh compound-B is widely used for non-invasive in vivo positron emission tomography imaging for diagnosis of AD^53,54. Congo Red, which shows characteristic apple-green birefringence under polarized light, is the most histological amyloid dye used for the diagnosis of amyloidosis for several decades^55,56. 8-Anilino-1-naphthalenesulfonic acid has also been used for detecting fibrils and prefibrillar intermediates, although specificity is not high⁵⁷. These amyloid dyes are very good at detecting the presence and quantifying the amount of amyloid fibrils. However, they are not so sensitive to differences in structure of amyloid fibrils and fail to probe amyloid polymorphism in many cases. Although NaCl, SDS, and no-salt fibrils showed slightly different peak wavelengths in ThT fluorescence spectrum (Fig. 1b), ThT fluorescence is typically considered to show little change in peak wavelength and only fluorescence intensity can be used for detecting amyloid polymorphs⁵⁸. Compared to these conventionally used dyes, it is expected that the color formed by iodine staining is highly sensitive to fibril structures, and in the case of the insulin fibril samples used in this study, clear differences in color, which were obvious even with the naked eye, were observed. A possible reason why the amyloid polymorphism could be detected with higher sensitivity in iodine staining than in ThT fluorescence spectroscopy may be due to the differences in binding sites between ThT and iodine, although further investigation is necessary for verifying it.

The coloration of amyloid fibrils by iodine staining is thought to be derived from polymerization of iodine upon binding to amyloid fibrils¹⁰. In water solution without any host compounds, polyiodide ions larger than I₃⁻ are absent in an iodine solution⁵⁹. However, a wide range of polyiodides structures have been observed within supramolecular crystalline compounds and polymers^{25,26,27,28,29}. As for amyloid fibrils, it is predicted that, because the cross-β structure of amyloid fibrils has high periodicity along the fibril axis, they can act as a scaffold of iodine complexation in a similar manner to other compounds. Indeed, resonance Raman spectroscopy identified the presence of I₃⁻ and I₅⁻ species as fibril-bound forms of iodine (Fig. 5). Considering that I₃⁻ itself does not absorb visible light so strongly^37,38, it is predicted that I₅⁻ and other polyiodide ions composed of I₃⁻ and I₅⁻ as fundamental building blocks, (I₃⁻)_n and (I₅⁻)_n, and possibly some other types of polyiodides composed of both of I₃⁻ and I₅⁻, (I₃⁻)_m(I₅⁻)_n, serve as the molecular basis of color formation.

Interestingly, the resonance Raman spectra excited at 785 nm were similar to the previously reported iodine-amylose pattern in terms of positions and relative intensities of fundamental bands as well as their overtone and combination bands^23,42. According to the crystal structure of iodine-doped α-cyclodextrin, a structural model that resembles the iodine-amylose complex, it is proposed that a chain-like I₅⁻ ion is encapsulated inside a channel-like cavity of the helical structure of amylose²⁹. It is therefore suggested that linearly aligned (I₅⁻)_n polyiodides contribute to the formation of the absorption band at the lowest wavenumber. On the other hand, the band at ~ 110 cm⁻¹ was rather stronger than that at ~ 160 cm⁻¹ when excited at 514.5 nm (Fig. 5a,b), implying that other types of polyiodides containing I₃⁻, possibly (I₃⁻)_n, might also be involved in the formation of reddish color. Alternatively, the increased Raman band at ~ 110 cm⁻¹ in the spectra may result from impairment of linear array of (I₅⁻)_n chains, in light of a previous report on the analysis of (I₅⁻)_n chains with different levels of alignment⁴³.

Figure 8 is a proposed model of the binding of polyiodides on amyloid fibrils. The crystal structures of several iodine-doped compounds, such as α-cyclodextrin²² and an inorganic–organic compound {(C₄H₁₂N₂)₂[Cu^II₄](I₂)}_n⁶⁰, have already been revealed at atomic level. According to these structures, iodine molecules are encapsulated or buried in gap structures of the host molecules. In contrast, Dzwolak revealed that iodine species bound to bovine insulin fibrils are easily reduced by ascorbic acids¹⁰, suggesting that iodine molecules are located on the solvent-accessible surface of amyloid fibrils. Given that the anisotropic coordination of polyiodides was suggested by the observation of iodine-stained spherulites by polarization microscopy, it is estimated that line shaped polyiodides are formed and stabilized on the grooves of the pleated cross-β structure running in parallel to the long axis of fibrils (model I in Fig. 8). The space between two side chains of the β-strand is approximately 7 Å, which is suitable size for iodine atoms of 4 Å in diameter to get stuck, and it is thus conceived to act as a scaffold to form line shaped polyiodide species. In addition to the surface of the cross-β structure, the typical distance between two laminated β-sheet layers is approximately 10 Å. The edge of the β-sheets could be another candidate for the binding region of polyiodides in a similar manner to the case of ThT binding⁶¹ (model II in Fig. 8). Twist grooves formed by intertwining protofilaments may also play a role as iodine binding sites suitable for the fixation of polyiodides. Further investigation is needed for more detailed specification of the binding sites.

In the system of insulin amyloid fibrils, spectral deconvolution of the UV–Vis spectra has clarified that the color formed by iodine staining of amyloid fibrils is represented as the sum of three major absorption bands in visible region. The titration of iodine solution to amyloid fibrils revealed that each of these absorption bands had its own specific binding constant for iodine binding (Fig. 6). This result indicates that insulin amyloid fibrils basically have three independent iodine-binding sites, to each of which a specific and different type of polyiodide ion binds; while the polyiodide ions are commonly composed of I₃⁻ and I₅⁻ building blocks, the conformations of the building blocks as well as their composition are different, as deduced from the result of the resonance Raman spectra obtained at two different excitation wavelengths (Fig. 5). Additionally, degree of polymerization may also be different depending on the binding sites, in view of a previous study on amylose with different degree of polymerization in which the absorption band shifted effectively to longer wavelength as the chain length of polyiodides increased²⁸.

As shown in Fig. 3, differences in the peak positions and intensity ratio of the three absorption bands in visible region were the spectroscopic entities underlying the color difference in iodine staining among polymorphs. The characteristics of the three absorption bands seem to change sensitively depending on structural properties of fibril surface. It is anticipated that the characteristic topology of amyloid polymorphs on cross-β structure and/or at its edge parts determines the structure and degree of polymerization of polyiodides on the binding sites, and eventually, leads to different coloration. Furthermore, when the absorption spectra of SDS and no-salt fibrils were compared, the wavenumbers of the three constituent absorption bands were similar; however, the relative ratio of their absorbance intensities were markedly different (Fig. 3b,c). This observation may suggest that differences in factors related to absorption intensity, i.e., the number of binding site and their binding constant of polyiodides, are also available for detecting polymorphic structures of amyloid fibrils, even though iodine binding sites are very similar.

Conclusion

Through this work, it was clarified that coloration by iodine staining has promising characteristics in identifying polymorphism of insulin amyloid fibrils. Considering that the colors successfully reported the differences in structure of insulin amyloid fibrils despite that their secondary structures were very similar (Fig. 1–3), it is expected that iodine staining works as a sensitive probe for amyloid polymorphs by discriminating their surface structures. The iodine color also successfully tracked the propagation process of insulin amyloid structures (Fig. 4). If future studies reveal that amyloid polymorphs of different proteins also show different colors, iodine staining will be extensively used as a general method for investigating amyloid polymorphism. Although iodine staining alone cannot function as a technical strategy for clarifying amyloid structures, its colors can act as a fingerprint of amyloid polymorphs. If color information on a particular type of amyloid fibrils of interest is investigated beforehand, its quick identification will be achieved by matching the color features. Moreover, given the recent situation that a growing number of the structures of amyloid fibrils are determined by cryo-EM and ssNMR spectroscopy, valuable insights into the relationships between the surface topology of amyloid fibrils and the corresponding color property by iodine staining are obtained practically by analyzing the color properties of amyloid fibrils with known structures. This will provide perspective on clarifying the molecular mechanism of iodine staining, and consequently, will boost the elucidation of molecular details for amyloid polymorphism underlying amyloid diseases.

Recently, luminescent conjugated polythiophenes and oligothiophenes have been developed as a molecular probe of amyloid fibrils⁶² and very recently, succeeded in differentiating pathological amyloid subtypes of Aβ in AD brains⁶³. This observation has revealed the presence of structurally distinct conformations in the affected area of amyloid diseases, arguing the importance of characterizing amyloid polymorphs in biological samples. Although iodine staining is based on absorption and is inferior in terms of signal intensity compared to fluorescent probes, it has potency of being applied to all of the amyloidogenic proteins, and covering a wide range of samples that have not been analyzed so far because of problems with amount that can be supplied for the analysis as well as inhomogeneity. Furthermore, in light of the fact that the iodine staining of amyloid fibrils was firstly discovered in the field of anatomy and is still used in part for diagnosis of amyloidoses, the present work also suggests that it will be worth revisiting the usefulness of the iodine staining of pathological tissues for evaluating the conditions and progress of diseases on the basis of amyloid polymorphism. Especially in Aβ, which is one of the most pathologically important amyloidogenic proteins and has been reported to adopt various fibril structures even in vivo probably due to its flexible and disordered conformation²¹, iodine staining may serve as an effective method to distinguish the complex polymorphism in the future. Further data accumulation connecting the iodine colors and fibril structures will open up new perspectives of the usage of iodine staining in various field of amyloid researches.

Materials and methods

Materials

Recombinant human insulin was purchased from Wako Pure Chemical Industries, Ltd., Osaka, Japan. Insulin was dissolved in 25 mM HCl, and whose concentration was determined using an absorption coefficient of 1.08 for 1.0 mg/ml at 276 nm⁶⁴. Iodine, potassium iodide, and ThT were also purchased from Wako Pure Chemical Industries, Ltd. HCl solution at a concentration of 100 mM, NaCl, and SDS were purchased from Nacalai Tesque (Kyoto, Japan).

Formation of amyloid fibrils of insulin

Human insulin dissolved in 25 mM HCl at a concentration of 2.0 mg/ml (344 μM in monomer units) was used as a fundamental sample solution. Fibrillation reaction was performed by incubating this solution at 65 °C for 24 h. For inducing polymorphism of amyloid fibrils, two types of additives, 100 mM NaCl or 100 µM SDS were used in addition to the solvent condition without additives. After the formation of amyloid fibrils, which were referred to as parent fibrils, a seed-dependent fibril formation was performed to obtain daughter fibrils. In this reaction, the fragments of fibrils were added to 2.0 mg/ml insulin dissolved in 25 mM HCl as seeds at a final concentration of 5% (w/v), and then incubated at 37 °C for 24 h. It should be noted that all of the seed-dependent fibrillation reactions were performed in the same solvent conditions without any additives. For the preparation of seeds, the parent fibrils were subjected to pulsed sonication using an XL2000 sonicator (Misonix, San Diego, CA, USA) operating for 1 s with power level at 2.0 W. The total number of sonication pulses was 40, and it was ensured that amyloid samples are not excessively heated during the sonication treatment.

ThT fluorescence assay

ThT fluorescence assay was performed according to the method of Naiki et al.⁵² with a slight modification of solution; 4.5 µl aliquots of sample solution was mixed with 1.5 ml of 5 µM ThT in 50 mM Gly-NaOH buffer (pH 8.5) at room temperature. After 1 min for equilibrium, fluorescence intensity at 485 nm was measured with an excitation wavelength of 445 nm with an RF-5300 PC (Shimadzu Corporation, Kyoto, Japan) to assay the formation of amyloid fibrils.

AFM

Samples of insulin amyloid fibrils were diluted 250 times with 25 mM HCl, and 10 µl aliquots of which were deposited onto a freshly cleaved dry mica surface. The solution was adsorbed for 1 min and then the mica surface was washed with 100 µl of water. The solution was blotted off by blotting paper and the mica plate was air-dried. AFM images were obtained by using an SPA-400 and a nano navi (Hitachi High-Tech Science, Tokyo, Japan). The scanning tip was an OMCL-AC160TS-C3 micro cantilever (Olympus Corporation, Tokyo, Japan; spring constant = 21–37 N/m, resonance frequency = 270–340 kHz), and the scan rate was 1.0 Hz.

ATR-FTIR absorption spectroscopy

ATR-FTIR spectra were measured with an FT/IR-6100 (JASCO, Tokyo, Japan). 2 μl of sample solution was blotted onto a germanium prism and then dried using compressed air. The spectral resolution and the number of scan were set to 4 cm⁻¹ and 128, respectively. A spectrum of atmospheric air was used as a reference spectrum to subtract the contributions of water vapor and carbon dioxide from each sample spectrum.

Iodine staining of amyloid fibrils

The color formation of insulin fibrils by the addition of iodine was analyzed by using UV–Vis spectroscopy. For the preparation of a sample, an iodine solution containing 24 mM KI and 3.2 mM I₂ was initially prepared, and 0.25 mg/ml (43 μM in monomer units) insulin fibrils containing 0.3 mM KI, and 0.04 mM I₂ in 25 mM HCl was made with the iodine solution and the sample fibrils. UV–Vis spectra from 250 to 750 nm were then measured at room temperature with a UV-2400PC (Shimadzu Corporation) or a Jasco V-650 spectrometer (JASCO Corporation, Tokyo, Japan) with a quartz cell with 1 cm optical length. The reaction between fibrils and iodine molecules was sufficiently rapid to reach equilibrium within 1 min under the present solution conditions, and thus we performed the measurement between 1 and 10 min after preparing the sample. For tracking seed-dependent fibrillation reactions, an aliquot of a reaction mixture was taken every one hour for sample preparation and subsequent spectral measurement, which were performed under the same conditions as those mentioned above. For titration experiments, 1 ml of 0.5 mg/ml (86 μM in monomer units) insulin fibrils dissolved in 25 mM HCl was prepared as an analyte, to which an iodine solution containing 18 mM KI and 2.4 mM I₂ in 25 mM HCl was titrated. A UV–Vis spectrum was monitored every after the addition of 4 μl of the iodine solution to the fibrils, and this procedure was repeated until spectral saturation was observed.

Resonance Raman spectroscopy

Raman resonance spectra were measured by using two types spectrometers, an HR-800-LWR (HORIBA, Kyoto, Japan) with 514.5 nm excitation and an inVia Raman microscope (Renishaw, Gloucestershire, UK) with 785 nm excitation. Both of the spectrometers were equipped with notch filters for suppressing Rayleigh scattering. A sample containing 0.5 mg/ml (86 μM in monomer units) insulin fibrils, 0.6 mM KI, and 0.08 mM I₂ in 25 mM HCl was taken in a glass capillary with its inner diameter of 1.13 mm (Drummond Scientific Company, Broomall, PA, USA) and placed on a sample stage. An excitation light was focused on the sample solution closed to the wall surface of the capillary to minimize reabsorption of Raman scattered light by the sample. Raman scattering was measured with back-scattering mode from 0 to 500 cm⁻¹ at room temperature.

Polarization microscopy of spherulites

To investigate polarization properties of the polyiodide ions bound on amyloid fibrils, microscopy observation of iodine-stained insulin spherulites was performed with an ECLIPSE LV100POL (Nikon, Tokyo, Japan), in which an analyzer was placed in the optical pathway between an objective lens and an eyepiece. To prepare spherulites, insulin solution at a concentration of 5.0 mg/ml (861 μM in monomer units) in 25 mM HCl was sealed between slide and cover glasses and incubated at 70 °C for 2 h, according to the method reported by Rogers et al⁵⁰. The spherulites formed were then stained with iodine by adding a small amount of iodine solution containing 24 mM KI and 3.2 mM I₂. Microscope images were recorded with a DS-L3 digital camera (Nikon) at different angles of rotations of the analyzer.

Data availability

All data generated or analysed during this study are included in this published article (and its Supplementary Information files).

References

Knowles, T. P., Vendruscolo, M. & Dobson, C. M. The amyloid state and its association with protein misfolding diseases. Nat. Rev. Mol. Cell Biol. 15, 384–396 (2014).
Article CAS PubMed Google Scholar
Benson, M. D. et al. Amyloid nomenclature 2018: recommendations by the international society of amyloidosis (ISA) nomenclature committee. Amyloid 25, 215–219 (2018).
Article CAS PubMed Google Scholar
Pedersen, J. S., Andersen, C. B. & Otzen, D. E. Amyloid structure-one but not the same: the many levels of fibrillar polymorphism. FEBS J. 277, 4591–4601 (2010).
Article CAS PubMed Google Scholar
Tycko, R. Physical and structural basis for polymorphism in amyloid fibrils. Protein Sci. 23, 1528–1539 (2014).
Article CAS PubMed PubMed Central Google Scholar
Gallardo, R., Ranson, N. A. & Radford, S. E. Amyloid structures: much more than just a cross-β fold. Curr. Opin. Struct. Biol. 60, 7–16 (2019).
Article PubMed CAS Google Scholar
Seuring, C. et al. Amyloid fibril polymorphism: almost identical on the atomic level, mesoscopically very different. J. Phys. Chem. B 121, 1783–1792 (2017).
Article CAS PubMed Google Scholar
Close, W. et al. Physical basis of amyloid fibril polymorphism. Nat. Commun. 9, 699 (2018).
Article ADS PubMed PubMed Central CAS Google Scholar
Nelson, R. et al. Structure of the cross-β spine of amyloid-like fibrils. Nature 435, 773–778 (2005).
Article ADS CAS PubMed PubMed Central Google Scholar
Petkova, A. T. et al. Self-propagating, molecular-level polymorphism in Alzheimer’s β-amyloid fibrils. Science 307, 262–265 (2005).
Article ADS CAS PubMed Google Scholar
Dzwolak, W. Insulin amyloid fibrils form an inclusion complex with molecular iodine: a misfolded protein as a nanoscale scaffold. Biochemistry 46, 1568–1572 (2007).
Article CAS PubMed Google Scholar
Xiao, Y. et al. Aβ(1–42) fibril structure illuminates self-recognition and replication of amyloid in Alzheimer’s disease. Nat. Struct. Mol. Biol. 22, 499–505 (2015).
Article CAS PubMed PubMed Central Google Scholar
Gremer, L. et al. Fibril structure of amyloid-β(1–42) by cryo-electron microscopy. Science 358, 116–119 (2017).
Article ADS CAS PubMed PubMed Central Google Scholar
Fitzpatrick, A. W. P. et al. Cryo-EM structures of tau filaments from Alzheimer’s disease. Nature 547, 185–190 (2017).
Article ADS CAS PubMed PubMed Central Google Scholar
Falcon, B. et al. Structures of filaments from Pick’s disease reveal a novel tau protein fold. Nature 561, 137–140 (2018).
Article ADS CAS PubMed PubMed Central Google Scholar
Tanaka, M., Chien, P., Naber, N., Cooke, R. & Weissman, J. S. Conformational variations in an infectious protein determine prion strain differences. Nature 428, 323–328 (2004).
Article ADS CAS PubMed Google Scholar
Pedersen, J. S. et al. The changing face of glucagon fibrillation: structural polymorphism and conformational imprinting. J. Mol. Biol. 355, 501–523 (2006).
Article CAS PubMed Google Scholar
Chatani, E., Yagi, H., Naiki, H. & Goto, Y. Polymorphism of β₂-microglobulin amyloid fibrils manifested by ultrasonication-enhanced fibril formation in trifluoroethanol. J. Biol. Chem. 287, 22827–22837 (2012).
Article CAS PubMed PubMed Central Google Scholar
Jones, E. M. & Surewicz, W. K. Fibril conformation as the basis of species- and strain-dependent seeding specificity of mammalian prion amyloids. Cell 121, 63–72 (2005).
Article CAS PubMed Google Scholar
Dzwolak, W. et al. Conformational indeterminism in protein misfolding: chiral amplification on amyloidogenic pathway of insulin. J. Am. Chem. Soc. 129, 7517–7522 (2007).
Article CAS PubMed Google Scholar
Lu, J. X. et al. Molecular structure of β-amyloid fibrils in Alzheimer’s disease brain tissue. Cell 154, 1257–1268 (2013).
Article CAS PubMed Google Scholar
Kollmer, M. et al. Cryo-EM structure and polymorphism of Aβ amyloid fibrils purified from Alzheimer’s brain tissue. Nat. Commun. 10, 4760 (2019).
Article ADS PubMed PubMed Central CAS Google Scholar
Noltemeyer, M. & Saenger, W. X-ray studies of linear polyiodide chains in α-cyclodextrin channels and a model for starch-iodine complex. Nature 259, 629–632 (1976).
Article ADS CAS Google Scholar
Teitelbaum, R. C., Ruby, S. L. & Marks, T. J. A resonance Raman-iodine Mössbauer investigation of the starch-iodine structure. Aqueous-solution and iodine vapor preparations. J. Am. Chem. Soc. 102, 3322–3328 (1980).
Article CAS Google Scholar
Okuda, M. et al. Theoretical modeling of electronic structures of polyiodide species included in α-cyclodextrin. J. Phys. Chem. B 124, 4089–4096 (2020).
Article CAS PubMed Google Scholar
Matsuyama, T., Sakai, H., Yamaoka, H., Maeda, Y. & Shirakawa, H. Mössbauer spectroscopic study of iodine-doped polyacetylene. J. Phys. Soc. Jpn. 52, 2238–2245 (1983).
Article ADS CAS Google Scholar
Murthy, N. S. & Khanna, Y. P. Transformations between polyiodide structures in a nylon-6 matrix. Chem. Mater. 5, 672–677 (1993).
Article CAS Google Scholar
Yokoyama, T., Kaneyuki, K., Sato, H., Hamamatsu, H. & Ohta, T. Structure, composition, and vibrational property of iodine-doped polyvinyl alcohol studied by temperature-dependent I K-edge extended X-ray-absorption fine structure. Bull. Chem. Soc. Jpn. 68, 469–475 (1995).
Article CAS Google Scholar
Ono, S., Tsuchihashi, S. & Kuge, T. On the starch-iodine complex. J. Am. Chem. Soc. 75, 3601–3602 (1953).
Article CAS Google Scholar
Noltemeyer, M. & Saenger, W. Structural chemistry of linear α-cyclodextrin-polyiodide complexes. X-ray crystal structures of (α-cyclodextrin)₂·LiI₃·I₂·8H₂O and (α-cyclodextrin)₂·Cd_0.5·I₅·27H₂O. Models for the blue amylose-iodine complex. J. Am. Chem. Soc. 102, 2710–2722 (1980).
Article CAS Google Scholar
Virchow, R. Nouvelles observations sur la substance animale analogou a la cellulose vegetale. C. R. Acad. Sci. (Paris) 37, 860–861 (1853).
Google Scholar
Sipe, J. D. & Cohen, A. S. Review: history of the amyloid fibril. J. Struct. Biol. 130, 88–98 (2000).
Article CAS PubMed Google Scholar
Buxbaum, J. N. & Linke, R. P. A molecular history of the amyloidoses. J. Mol. Biol. 421, 142–159 (2012).
Article CAS PubMed Google Scholar
Gade Malmos, K. et al. ThT 101: a primer on the use of thioflavin T to investigate amyloid formation. Amyloid 24, 1–16 (2017).
Article CAS PubMed Google Scholar
Groenning, M., Frokjaer, S. & Vestergaard, B. Formation mechanism of insulin fibrils and structural aspects of the insulin fibrillation process. Curr. Protein Pept. Sci. 10, 509–528 (2009).
Article CAS PubMed Google Scholar
Groenning, M. Binding mode of thioflavin T and other molecular probes in the context of amyloid fibrils-current status. J. Chem. Biol. 3, 1–18 (2010).
Article PubMed Google Scholar
Bandekar, J. Amide modes and protein conformation. Biochim. Biophys. Acta 1120, 123–143 (1992).
Article CAS PubMed Google Scholar
Awtrey, A. D. & Connick, R. E. The absorption spectra of I₂⁻, I₃⁻, I⁻, IO₃⁻, S₄O₆⁼ and S₂O₃⁼. Heat of the reaction I₃⁻ = I₂ + I⁻. J. Am. Chem. Soc. 73, 1842–1843 (1951).
Article CAS Google Scholar
Pursell, J. L. & Pursell, C. J. Host-guest inclusion complexation of α-cyclodextrin and triiodide examined using UV-Vis spectrophotometry. J. Phys. Chem. A 120, 2144–2149 (2016).
Article CAS PubMed Google Scholar
Svensson, P. H. & Kloo, L. Synthesis, structure, and bonding in polyiodide and metal iodide-iodine systems. Chem. Rev. 103, 1649–1684 (2003).
Article CAS PubMed Google Scholar
Kupper, F. C. et al. Commemorating two centuries of iodine research: an interdisciplinary overview of current research. Angew. Chem. Int. Ed. Engl. 50, 11598–11620 (2011).
Article PubMed CAS Google Scholar
Yu, X. C., Houtman, C. & Atalla, R. H. The complex of amylose and iodine. Carbohydr. Res. 292, 129–141 (1996).
Article CAS Google Scholar
Teitelbaum, R. C., Ruby, S. L. & Marks, T. J. On the structure of starch-iodine. J. Am. Chem. Soc. 100, 3215–3217 (1978).
Article CAS Google Scholar
Mizuno, M., Tanaka, J. & Harada, I. Electronic spectra and structures of polyiodide chain complexes. J. Phys. Chem. 85, 1789–1794 (1981).
Article CAS Google Scholar
Burzynski, R., Prasad, P. N. & Murthy, N. S. Structure of the iodine columns in iodinated nylon-6. J. Polym. Sci. B. Polym. Phys. 24, 133–141 (1986).
Article ADS CAS Google Scholar
Moulay, S. Molecular iodine/polymer complex. J. Polym. Eng. 33, 389–443 (2013).
Article CAS Google Scholar
Madhu, S. et al. Infinite polyiodide chains in the pyrroloperylene-iodine complex: insights into the starch-iodine and perylene-iodine complexes. Angew. Chem. Int. Ed. Engl. 55, 8032–8035 (2016).
Article CAS PubMed Google Scholar
O’Riordan, J. F., Goldstick, T. K., Ditzel, J. & Ernest, J. T. Characterization of oxygen-hemoglobin equilibrium curves using nonlinear regression of the Hill equation: parameter values for normal human adults. Adv. Exp. Med. Biol. 159, 435–444 (1983).
Article CAS PubMed Google Scholar
Reddy, J. M., Knox, K. & Robbin, M. B. Crystal structure of HI₃·2C₆H₅CONH₂: a model of the starch-iodine complex. J. Chem. Phys. 40, 1082–1089 (1964).
Article ADS CAS Google Scholar
Seto, M., Maeda, Y., Matsuyama, T., Yamaoka, H. & Sakai, H. Light polarization in iodine-doped polyvinyl alcohol films. Hyperfine Interact. 68, 221–224 (1991).
Article ADS CAS Google Scholar
Rogers, S. S., Krebs, M. R., Bromley, E. H., van der Linden, E. & Donald, A. M. Optical microscopy of growing insulin amyloid spherulites on surfaces in vitro. Biophys. J. 90, 1043–1054 (2006).
Article CAS PubMed Google Scholar
Vassar, P. S. & Culling, C. F. Fluorescent stains, with special reference to amyloid and connective tissues. Arch. Pathol. 68, 487–498 (1959).
CAS PubMed Google Scholar
Naiki, H., Higuchi, K., Hosokawa, M. & Takeda, T. Fluorometric determination of amyloid fibrils in vitro using the fluorescent dye, thioflavin T. Anal. Biochem. 177, 244–249 (1989).
Article CAS PubMed Google Scholar
Klunk, W. E. et al. Imaging brain amyloid in Alzheimer’s disease with Pittsburgh compound-B. Ann. Neurol. 55, 306–319 (2004).
Article CAS PubMed Google Scholar
McNamee, R. L. et al. Consideration of optimal time window for Pittsburgh compound B PET summed uptake measurements. J. Nucl. Med. 50, 348–355 (2009).
Article CAS PubMed Google Scholar
Bennhold, H. Specific staining of amyloid by Congo red. Münch. Med. Wochenschr. 69, 1537–1538 (1922).
Google Scholar
Yakupova, E. I., Bobyleva, L. G., Vikhlyantsev, I. M. & Bobylev, A. G. Congo red and amyloids: history and relationship. Biosci. Rep. 39, BSR20181415 (2019).
Article PubMed PubMed Central Google Scholar
Lindgren, M., Sorgjerd, K. & Hammarstrom, P. Detection and characterization of aggregates, prefibrillar amyloidogenic oligomers, and protofibrils using fluorescence spectroscopy. Biophys. J. 88, 4200–4212 (2005).
Article CAS PubMed PubMed Central Google Scholar
Singh, P. K., Kumbhakar, M., Pal, H. & Nath, S. Ultrafast bond twisting dynamics in amyloid fibril sensor. J. Phys. Chem. B. 114, 2541–2546 (2010).
Article CAS PubMed Google Scholar
Ramette, R. W. & Sandford, R. W. Thermodynamics of iodine solubility and triiodide ion formation in water and in deuterium oxide. J. Am. Chem. Soc. 87, 5001–5005 (1965).
Article CAS Google Scholar
Redel, E., Rohr, C. & Janiak, C. An inorganic starch-iodine model: the inorganic-organic hybrid compound {(C₄H₁₂N₂)₂[Cu^II₄](I₂)}_n. Chem. Commun. 16, 2103–2105 (2009).
Article CAS Google Scholar
Morii, H., Saiki, M., Konakahara, T. & Ishimura, M. Peripheral region for core cross-β plays important role in amyloidogenicity. Biochem. Biophys. Res. Commun. 342, 808–816 (2006).
Article CAS PubMed Google Scholar
Fändrich, M. et al. Amyloid fibril polymorphism: a challenge for molecular imaging and therapy. J. Intern. Med. 283, 218–237 (2018).
Article PubMed PubMed Central Google Scholar
Rasmussen, J. et al. Amyloid polymorphisms constitute distinct clouds of conformational variants in different etiological subtypes of Alzheimer’s disease. Proc. Natl. Acad. Sci. USA 114, 13018–13023 (2017).
Article CAS PubMed PubMed Central Google Scholar
Nielsen, L., Frokjaer, S., Carpenter, J. F. & Brange, J. Studies of the structure of insulin fibrils by Fourier transform infrared (FTIR) spectroscopy and electron microscopy. J. Pharm. Sci. 90, 29–37 (2001).
Article CAS PubMed Google Scholar

Download references

Acknowledgments

We thank Tomomi Kozu (Renishaw K.K.) for help of resonance Raman measurements and Prof. Masahide Yamamoto (Kyoto University) for valuable comments on iodine-polymer complexes. AFM measurements were performed at Research Facility Center for Science and Technology, Kobe University. This work was supported by JSPS Core-to-Core Program, A. Advanced Research Networks. This work was funded by JSPS KAKENHI Grant Numbers JP16H04778, JP16H00772, JP17H06352, and JP20K21396.

Author information

Authors and Affiliations

Graduate School of Science, Kobe University, 1-1 Rokkodai, Nada, Kobe, Hyogo, 657-8501, Japan
Takato Hiramatsu, Seongmin Ha, Yuki Masuda, Keisuke Yuzu & Eri Chatani
School of Medicine, Jichi Medical University, 3311-1 Yakushiji, Shimotsuke, 329-0498, Japan
Naoki Yamamoto
School of Science and Technology, Kwansei Gakuin University, 2-1 Gakuen, Sanda, Hyogo, 669-1337, Japan
Mitsuru Yasuda & Yukihiro Ozaki
Raman Project Center for Medical and Biological Applications, Shimane University, 1060 Nishikawatsu, Matsue, Shimane, 690-8504, Japan
Mika Ishigaki
Faculty of Life and Environmental Science, Shimane University, 1060 Nishikawatsu, Matsue, Shimane, 690-8504, Japan
Mika Ishigaki
Molecular Photoscience Research Center, Kobe University, 1-1 Rokkodai, Nada, Kobe, Hyogo, 657-8501, Japan
Yukihiro Ozaki

Authors

Takato Hiramatsu
View author publications
You can also search for this author in PubMed Google Scholar
Naoki Yamamoto
View author publications
You can also search for this author in PubMed Google Scholar
Seongmin Ha
View author publications
You can also search for this author in PubMed Google Scholar
Yuki Masuda
View author publications
You can also search for this author in PubMed Google Scholar
Mitsuru Yasuda
View author publications
You can also search for this author in PubMed Google Scholar
Mika Ishigaki
View author publications
You can also search for this author in PubMed Google Scholar
Keisuke Yuzu
View author publications
You can also search for this author in PubMed Google Scholar
Yukihiro Ozaki
View author publications
You can also search for this author in PubMed Google Scholar
Eri Chatani
View author publications
You can also search for this author in PubMed Google Scholar

Contributions

T.H. and E.C. designed experiments. T.H., S.H., Y.M., M.Y., M.I., K.Y. performed experiments. T.H., N.Y., Y.O., and E.C. performed data analysis. T.H. and E.C. wrote the manuscript. All authors discussed the results and commented on the manuscript.

Corresponding author

Correspondence to Eri Chatani.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary information.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

About this article

Cite this article

Hiramatsu, T., Yamamoto, N., Ha, S. et al. Iodine staining as a useful probe for distinguishing insulin amyloid polymorphs. Sci Rep 10, 16741 (2020). https://doi.org/10.1038/s41598-020-73460-y

Download citation

Received: 19 April 2020
Accepted: 27 August 2020
Published: 07 October 2020
DOI: https://doi.org/10.1038/s41598-020-73460-y

This article is cited by

Bottom-up construction of mesoporous supramolecular isomers based on a Pd3L6 triangular prism as templates for shape specific aggregation of polyiodide
- Wen-Jie Shi
- Xin Li
- Ying-Feng Han
Nano Research (2022)

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.