Abstract
Corrosion products formed on low alloy steel under two marine environments are characterised. Both environments are classified as C4 according to the ISO 9223 Standard. The corrosion products are identified and their relative proportion is determined by Mössbauer spectroscopy (transmission geometry). Free potentials of corrosion are measured to evaluate the activity of their surfaces. Structural characterisation by XRD were performed on selected samples. It is concluded that the principal phases are goethite, lepidocrocite, ferrihidrite and maghemite. The relative amount of each of them changes with time and with the atmospheric dynamics of each environment.
Similar content being viewed by others
References
Uller, L., Morcillo, M. et al., In: Corrosión y Protección de Metales en las Atmóferas Iberoamericanas, Parte I - Mapas de Iberoamérica de Corrosividad Atmosférica (Proyecto MICAT, XV.1/CYTED), Programa CYTED, España, 1998, p. 203.
Hughes, J. D., King, G. A. and O'Brien, D. J., In: Proceedings 13th ICC, Melbourne, Australia, 1996, p. 24.
Marco, J. F. and Gracia, M., Corrosion Science 42 (2000), 753.
ISO 9223: Corrosion of metals and alloys. Classification of Corrosivity of Atmospheres, ISO, Genève, Switzerland, 1990.
Greenwood, N. N. and Gibb, T. C., Mössbauer Spectroscopy, Chapman and Hall Ltd, London, 1971, p. 241.
Stevens, J. G., Pollak, H., Zhe, L., Stevens, V. E., White, R.M. and Gibson, J. L. (eds), In: Mössbauer Handbook, Mineral: Data, Mössbauer Effect Data Center, University of North Carolina, 1983, p. 74.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ohanian, M., Caraballo, R., Dalchiele, E.A. et al. A Mössbauer and Electrochemical Characterization of the Corrosion Products Formed from Marine and Marine-Antartic Environments. Hyperfine Interactions 148, 193–198 (2003). https://doi.org/10.1023/B:HYPE.0000003780.80572.cc
Issue Date:
DOI: https://doi.org/10.1023/B:HYPE.0000003780.80572.cc