Abstract
Nanometer size hydroxyapatite (HA) crystals are prepared by a wet chemical precipitation method at different synthesis temperatures and with various reactant addition rates. The resulting aqueous suspensions are studied in terms of morphology (transmission electron microscope, specific surface area), phase (X-ray diffraction, electron diffraction and infrared spectroscopy) and rheological properties. This work shows that shape, size and specific surface area of the HA nanoparticles are very sensitive to the reaction temperature and also to the reactant addition rate. The measured pH at the end of synthesis, which is strongly linked with the reactant addition rate, is a key parameter which can be used to determine the purity of the synthesized HA nanocrystal and also for the stabilization (dispersion) of the suspension. HA nanoparticles synthesized at low temperature (T < 6°C) are monocrystalline. A transition temperature (T=60 °C) can be defined as a limit for the synthesis of monocrystalline HA nanocrystals, above this critical temperature nanocrystals become polycrystalline. HA monocrystals adopt a needle shape and are oriented following the c-axis of the hexagonal HA structure. The as-synthesized suspension is then concentrated and the effect of a dispersing agent addition, which is needed to get a high solid/liquid ratio coupled with good flowability of the suspension, is also shown, because this suspension is used in the suspension plasma spraying process.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
R. H. DOREMUS, J. Mater. Sci. 27 (1992) 285.
K. A. THOMAS, Orthopedics 17 (1994) 267.
Y. MASUDA, K. MATUBARAM and S. SAKKA, J. Ceram. Soc. Jpn 98 (1990) 1266.
C. CHAI, B. BEN-NISSAN, S. PYKE and L. EVANS, “Surface Modification Technologies VII”, edited by T. S. Suddshan (Cambridge University Press, 1994) p. 509.
A. DEPTULA, W. LADA, T. OLCZAC, R. Z. LEGEROS and J. P. LEGEROS, in “Bioceramics” Vol. 9 (University Press, UK 1996) p. 313.
B. BEN-NISSAN, C. S. CHAI and K. A. GROSS, “Bioceramics” Vol. 10, edited by L. Sedel and C. Rey (Elsevier Science Ltd, UK, 1997) p. 175.
E. BOUYER, F. GITZHOFER and M. I. BOULOS, JOM 16 (1997) 57.
PH. COLOMBAN, Ceram. Int. 15 (1989) 23.
C. J. BRINKER and G. W. SCHERER, “Sol-gel Science: The Physics and Chemistry of Sol-gel Processing,” (Academic Press Inc., Boston, USA, 1990).
H. TAGAI and H. AOKI, “Preparation of synthetic hydroxyapatite and sintering of apatite ceramics: Mechanical properties of biomaterials”, Chapter 39, edited by G. W. Hastings and D. F. Williams (John Wiley & Sons Ltd, 1987) p. 213.
J. HUAXIA and P. M. MARQUIS, J. Mater. Sci. Lett. 10 (1991) 132.
B. D. CULLITY, in “Elements of X-ray diffraction”, 2nd edition (Addison-Wesley Publishing Company, Inc., Reading, MA, USA, 1978) p. 555.
L. YUBAO, C. P. A. T. KLEIN, J. DE WIJN, S. VAN DE MEER and K. DE GROOT, J. Mater. Sci.: Mater. Med. 5 (1994) 263.
K. C. BLAKESLEE and R. A. CONDRATE, J. Am. Ceram. Soc. 54 (1971) 559.
B. O. FOWLER, Inorg. Chem. 13 (1974) 194.
J. D. TERMINE and A. S. POSNER, Nature 211 (1966) 268.
J. S. REED, “Principles of Ceramics Processing” 2nd edition (John Wiley & Sons, Interscience, New York, USA, 1995) p. 658.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bouyer, E., Gitzhofer, F. & Boulos, M.I. Morphological study of hydroxyapatite nanocrystal suspension. Journal of Materials Science: Materials in Medicine 11, 523–531 (2000). https://doi.org/10.1023/A:1008918110156
Issue Date:
DOI: https://doi.org/10.1023/A:1008918110156