Abstract
Theories and applications associated with sintering of ceramics and reducing of sintering temperature are reviewed. The whole sintering process is divided into three sub-processes as powder preparation, compaction and sintering, and each sub-process is discussed in terms of its possible contribution to the reducing of sintering temperature. New approach for practical optimization of sintering process is investigated. The application of above in the Low Temperature Co-fired Ceramics (LTCC) is discussed. Meanwhile, many successful applications in reducing the sintering temperatures are presented.
Similar content being viewed by others
References
Upadhyaya, G.S.: Science of Sintering, 27(2):49-70, 1995.
Rosolowski, J.H. and Burke, J.E.: In Encyclopedia of Chemical Processing and Design, John J. McKetta (ed.), Chapter of Sintering, New York: Marcel Dekker, Inc., pp. 301-329, 1995.
Lee, J., Hwang, J.-H., Mashek, J.J., Mason, T.O., Miller, A.E., and Siegel, R.W.: J. Mater. Res., 10(9):2295-2300, 1995.
Siegel, R.W., Ramasamy, S., Hahn, H., Zongquan Li, Ting Lu, and Gronski, R.: J. Mater. Res., 3:1367, 1988.
Siegel, R.W.: Mater. Sci. Eng., A 168:189, 1993.
Stujts, A.L.: Sintering and related phenomena. Proc. of 3rd Int. Conference, G.C. Kuczynski (ed.), New York: Plenum Press, pp. 331-337, 1973.
Hausner, H.H.: In Sintering New Development, M.M. Ristic (ed.), Amsterdam: Elsevier Scientific Publishing Co., p. 3, 1979.
Kuczynski, G.C.: In Sintering New Development. M.M. Ristic (ed.), Amsterdam: Elsevier Scientific Publishing Co., p. 245, 1979.
Ristic, M.M.: Int. Symp. on Science and Technology of Sintering “Sintering 87,” Tokyo, 1987.
Ristic, M.M.: Science of Sintering, 22(1):3-9, 1990.
Lenel, F.V. and Ansell, G.S.: Modern Development in Powders Metallurgy, H.H. Hausner (ed.), New York: Plenum Press, Vol. 1, p. 281, 1966.
Lenel, F.V., Ansell, G.S., and Morris, R.C.: Modern Development in Powders Metallurgy, H.H. Hausner (ed)., New York: Plenum Press, Vol. 4, p. 199, 1971.
Schatt, W. and Freidrich, E.: Crystal Research and Technology, 17(9):1061, 1982.
Schatt, W., Freidrich, E., and Wieters, K.P.: Reviews of Powder Metallurgy and Physical Ceramics, 3:1-111, 1986.
Kuczynski, G.C.: J. Appl. Physics, 20:1160, 1949.
Kuczynski, G.C.: J. Appl. Physics, 20:632, 1950.
Gouri, S., Lund, J.A., and Chaklader, A.C.D.: Solid State Phenomena, 25/26:45-54, 1992.
Chu, M.-Y., Rahaman, N.N., Jonghe, L.C.De, and Brook, R.J.: J. Am. Ceram. Soc., 74:1217-1225, 1991.
Hassold, G.N., Chen, I.-W., and Srolovitz, D.J.: J. Am. Ceram. Soc., 73:2857-2864, 1990.
Chen, I.-W., Hassold, G.N., and Srolovitz, D.J.: J. Am. Ceram. Soc., 73:2865-2872, 1990.
Madhavrao, L.R. and Rajagopalan, R.: J. Mater. Res., 4(5):1251-1256, 1989.
Ristic, M.M., Nikolic, M.V., and Radic, S.M.: Science of Sintering, 26(2):89-106, 1994.
Samsonov, G.V., Pryadko, I.F., and Pryadko, L.F.: A Configuration Model of Matter, New York: Consultants Bureau, 1973.
German, R.M.: Science of Sintering, 15:27, 1983.
Uphadhyaya, G.: Int. Symp. on Science of Sintering “Sintering 87”, Tokyo, 1987.
Richerson, D.W.: Modern Ceramic Engineering: Properties, Processing and Use in Design, New York: Marcel Dekker, p. 216, 1988.
Snelling, E.C.: Soft Ferrites: Properties and Applications, London: Iliffe Books Ltd., pp. 1-17, 1988.
Ryshkewitch, E.: Oxide Ceramics, Physical Chemistry and Technology, New York: Academic Press, pp. 44-67, 1960.
Fuerstenau, D.W.: Kona (Powder), 13:5-17, 1995.
Lowrison, G.C.: Crushing and Grinding, Cleveland, OH: CRC Press, Inc., p. 60, 1979.
El-Shall, H. and Somasundaran, P.: Powder Technology, 38:275-293, 1984.
Somasundaran, P. and El-Shall, H.: In Ultrafine Grinding and Separation of Industrial Minerals, S.G. Malghan (ed.), New York: AIME, pp. 21-35, 1983.
El-Shall, H. and Somasundaran, P.: Powder Technology, 38:267-273, 1984.
Schoenert, K.: Trans. Soc. Min. Engineers, AIME, 252:21-26, 1972.
Hammond, M.L. and Ravitz, S.F.: J. Am. Ceram. Soc., 46:329-332, 1963.
Velamaka, B.V. and Fuerstenau, D.W.: Floculation in Biotechnology and Separation System, Y.A. Attia (ed.), Amsterdam: Elsevier, pp. 211-223, 1987.
Fuerstenau, D.W., Venkataraman, K.S., and Velamakanni, B.V.: Int. J. Mineral Processing, 15:251-267, 1985.
Fuerstenau, D.W., Kapur, P.C., and Velamakanni, B.V.: Int. J. Mineral Processing, 28:81-98, 1990.
Kapur, P.C., Ranjan, S., and Fuerstenau, D.W.: Int. J. Mineral Processing, pp. 9-29, 1992.
Klimpel, R.R.: Powder Technology, 31:255-262, 1982.
Klimpel, R.R.: Powder Technology, 32:267-277, 1982.
Gao, M.W. and Forssberg, E.: XVIII Int. Process. Congr., Sydney, Australia, pp. 237-244, 1993.
Laskowski, J.S. and Pugh, R.J.: Colloid Chemistry in Mineral Processing, Elsevier, Chapter 4, pp. 115-171, 1992.
Bucall, R. and Corner, T.: Colloids Surf., 17:39-44, 1986.
Vincent, B. and Whittington, S.G.: Surface and Colloid Science, E. Matijevic (ed.), Plenum Press, Vol. 12, pp. 1-108, 1982.
Tanaka, T.: Kona (Powder), 13:19-28, 1995.
Kostic, E., Kis, S., and Boskovic, S.: Science of Sintering, 26(1):11-20, 1994.
Buchanan, R.C.: Ceramic Materials for Electronics: Processing, properties and applications, New York: Marcel Dekker, 1986.
Fang, T.T., Hwang, J.B., and Shiau, F.S.: J. Mater. Sci. Lett., 8:1386-1388, 1989.
Giesche, H. and Matijević, E.: J. Mater. Res., 9(2):436-450, 1994.
Mitra, R., Puri, R.K., and Mendiratta, R.G.: J. Mater. Sci., 27:1275-1279, 1992.
Mitra, R., Puri, R.K., and Mendiratta, R.G.: J. Mater. Sci. Lett., 11:276-277, 1992.
Matijević, E.: Chem. Mater., 5:412-426, 1993.
Risbud, S.H. et al.: J. Mater. Res., 10(2):237-239, 1995.
Ichinose, N., Ozaki, Y., and Kashu, S.: Superfine Particle Technology, New York: Springer-Verlag, p. 80, 1988.
Williams, C.M. et al.: J. Appl. Phys., 75(2):1676-1680, 1994.
De Marco, M.: J. Appl. Phys., 73(10):6287-6289, 1993.
Hahn, H., Logas, J., and Averback, R.S.: J. Mater. Res., 5:609, 1990.
Kodama, T. et al.: J. Appl. Phys., 69(8):5915-5917, 1991.
Chang, C.W., Tzeng, M.S., and Wang, S.J.: J. Mater. Sci. Lett., (9):832-835, 1990.
Pandya, P.B., Joshi, H.H., and Kulkarni, R.G.: J. Mater. Sci., 26:5509-5512, 1991.
Rozman, M. and Drofenik, M.: J. Am. Ceram. Soc., 28(9):2449-2455, 1995.
Her, Y.-S., Matijevic, E., and Chon, M.C.: J. Mater. Res., 10(12):3106-3114, 1995.
Stavek, J., Sipek, M., Hirasawa, I., and Toyokura, K.: Chem. Mater., 4:545-555, 1992.
Sugimoto, T.: Adv. Colloid Interface Sci., 28:65-108, 1987.
Wey, J.S.: Preparation and Properties of Solid State Materials, New York: Marcer Dekker, vol. 6, pp. 67-117, 1981.
Komarneni, S., Fregeau, E., Breval, E., and Roy, R.: J. Am. Ceram. Soc., 71(1):C26-28, 1988.
Pannaparayil, T., Marande, R., and Komarneni, S.: J. Appl. Phys., 69(8):5349-5351, 1991.
Pannaparayil, T., Marande, R., Komarneni, S., and Zadarko, M.: J. Appl. Phys., 67(9):5509-5511, 1990.
Dawson, W.J.: Am. Ceram. Soc. Bull., 67(19):1673-1678, 1988.
Kuang, X. and Mao, M.: Engineering Chemistry and Metallurgy (Chinese), 4:85, 1994.
Kuang, X., Carotenuto, G., Nicholais, L. et al.: Journal of Applied Composite Materials, 1:1-11, 1996.
Kuang, X., Mao, M. et al.: Proceeding of the 5th International Symposium on Ceramic Materials & Components for Engines, Singapore: World Scientific Publishing Ltd., 1995.
Emeruwa, E., Jarrige, J., and Mexmain, J.: J. Euro-Ceram., 1(1):248-252, 1989.
Hsieh, H.L. and Fang, T.T.: J. Am. Ceram. Soc., 72:142, 1989.
Schatt, W.: Science of Sintering, 25(3):99-107, 1993.
Gropyanov, V.M. and Rizhikov, A.L.: Science of Sintering, 25(3):109-116, 1993.
Ivensen, V.A.: Metallurgiya, 247, 1985.
Gropyanov, V.M. and Abbakymov, V.G.: Poroshkaya Metallurgiya, 5:76, 1975.
Wu, C.C. and Rice, R.W.: Ceram. Eng. and Sci. Proc., 6:977, 1985.
Rizhikov, A.L. and Gropyanov, V.M.: Soviet J. of Friction and Wear, 2:361, 1991.
Hsu, J.Y., Ko, W.S., Shen, H.D., and Chen, C.J.: IEEE Transaction on Magnetics, 30(6):4875-4877, 1994.
Takaya, M.: Japanese Electronic Engineer., pp. 38-41, 1986.
Nomura, T. and Nakano, A.: Proceedings of the 6th International Conference on Ferrites, T. Yamaguchi and M. Abe (eds.), Tokyo and Kyoto, Japan: The Japanese Society of Powder and Powder Metallurgy, pp. 1198-1201, 1992.
Nakano, A., Momoi, H., and Nomura, T.: Proceedings of the 6th International Conference on Ferrites, T. Yamaguchi and M. Abe (eds.), Tokyo and Kyoto, Japan: The Japanese Society of Powder and Powder Metallurgy, pp. 1225-1228, 1992.
Goldman, A.: Chemical Aspects of Ferrites, in Modern Ferrite Technology, New York: Van Nostrand Reinhold, Chap. 3, pp. 87-114, 1990.
Tormey, E.S.: IEPS. Proceedings of the Technical Conference, International Electronics Packaging Conference, pp. 215-228, 1990.
Taguchi, T., Kuribayashi, H., Tanaka, J., Konage, T., and Morigami, Y.: US Patent No. 05468694 please also see US Patent No. 4396720, 4519828, 4528275, 4654095, 4655864, 4849379, 4849380 and 5356841.
Nomura, T., Nakano, Y., Satoh, A., and Hitomi, A.: US Patent No. 05319517.
Prabhu, A.N., Conlon, E.J., and Thaler, B.J.: US Patent 05216207. Please also see US Patent No. 4355115, 4733018, 4748136, 4772574, 4808673, 48410420, 4816615, 4874550, 4880567 and 5024883.
Author information
Authors and Affiliations
About this article
Cite this article
Kuang, X., Carotenuto, G. & Nicolais, L. A Review of Ceramic Sintering and Suggestions on Reducing Sintering Temperatures. Advanced Performance Materials 4, 257–274 (1997). https://doi.org/10.1023/A:1008621020555
Issue Date:
DOI: https://doi.org/10.1023/A:1008621020555