Abstract
Fracture of single crystal nanolaminated thin films has been investigated through in situ straining of cross-sectional samples of Cu/Ni nanolaminates grown on Cu (001) single crystal substrates. The earlest stages of deformation exhibits a confined layer slip mechanism. With continued straining, unstable fracture occurs creating a mixed-mode crack that propagates across the nanolaminate, roughly perpendicular to the interfaces. Eventually, stable crack growth with intense plastic deformation ahead of the crack tip occurs over many bilayers in the direction of crack growth. Simultaneously, plasticity was seen to spread only 1 or 2 bilayer distances normal to the crack, creating an extremely localized plastic zone. Transmission electron microscopic (TEM) examination after the test did not reveal the presence of dislocations in the crack wake, except where severe crack deflection was observed. By comparison, the plastic zone size in the substrate was greater by several of orders of magnitude.
Similar content being viewed by others
References
Anderson, P.M. and Li, C. (1995). Hall-petch relations for multilayered materials. Nanostructured Materials 5, 349–362.
Anderson, P.M., Foecke, T. and Hazzledine, P.M. (1999). Dislocation-based deformation mechanisms in metallic nanolaminates. MRS Bulletin 24, 27–33.
Chu, X. and Barnett, S.A. (1995). Model of superlattice yield stress and hardness enhancements. Journal of Applied Physics 77, 4403–4411.
Daniels, B.J., Nix, B.D. and Clemens, B.M. (1995). Effect of coherency stresses on the hardness of epitaxial Fe(001)/PT(001) Multilayers 1995. Appied Physics Letters 66, 2969–2971.
Ebrahimi, F. and Liscano, A.J. (2001). Microstructure/mechanical properties relationship in electrodeposited Ni/Cu nanolaminates. Materials Science and Engineering A301, 23–34.
Embury, J.D. and Hirth, J.P. (1994). On dislocation storage and the mechanical response of fine-scale microstructures. Acta Metallurgica et Materialia 42, 2051–2056.
Foecke, T. and Van Heerden, D. (1993). Chemistry and Physics of Nanostructures and Related Non-Equilibrium Materials (Edited by E. Ma. B. Fultz, R. Shull, J. Morral and P. Nash), The Metallurgical Society. Pittsburgh, 193–198.
Josell, D., van Heerden, D., Read, D., Bonevich, J. and Shechtman, D. (1998). Tensile testing low density multilayers: aluminum/titanium. Journal of Materials Research 13, 2902.
Koehler, J.S. (1970). Designing strong solid. Physical Review B2, 547–551.
Lu, J.-C., Kung, H., Griffin, A.J., Jr., Nastasi, M.A. and Mitchell, T.E. (1997). Observations of dislocations in Cu/Nb nanolayer composites after deformation. 1997. Journal of Materials Research 12, 1939–1941.
Misra, A., Verdier, M., Kung, H., Embury, J.D. and Hirth, J.P. (1999). Deformation mechanism maps for polycrystalline metallic multilayers. Scripta Materialia 41, 973–979.
Moffat, T.P. (1995). Electrochemical production of single-crystal Cu-Ni strained-layer superlattices on Cu(100). Journal of the Electrochemical Society 142, 3767–3770.
Ohr, S.M. (1985). An electron-microscope study of crack tip deformation and its impact on the dislocation theory of fracture. Materials Science and Engineering A72, 1–42.
Ruff, A.W. and Lashmore, D.S. (1991). Effect of layer spacing on wear of Ni/Cu multilayer alloys. Wear 151, 245–254.
Tench, D. and White, J. (1984). Enhanced tensile-strength for electrodeposited nickel-copper multilayer composites. Metallurgical Transactions 15A, 2039–2040.
Was, G.S. and Foecke, T. (1995). Fracture and deformation in microlaminates. Thin Solid Films 286, 1–47.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Foecke, T., Kramer, D. In situ TEM observations of fracture in nanolaminated metallic thin films. International Journal of Fracture 119, 351–357 (2003). https://doi.org/10.1023/A:1024967510917
Issue Date:
DOI: https://doi.org/10.1023/A:1024967510917