Abstract
The plane problem of three-dimensional elastic stability is solved for a ribbon-reinforced composite under lateral compression if its initial state is nonuniform. The net approach is used to numerically solve the problem. The influence of the ratio of the elastic moduli of the matrix and the filler and the ribbon shape factor on the critical load of the material is studied
Similar content being viewed by others
REFERENCES
H. S. Katz and J. V. Milewski (eds.), Handbook of Fillers and Reinforcements for Plastics, Van Nastrand Reinhold Company, New York (1978).
A. N. Guz' and J. A. Musaev, “Fracture of ribbon-reinforced composites under compression,” Dokl. Akad. Nauk SSSR, 301, No. 3, 565–568 (1988).
A. N. Guz' and J. A. Musaev, “Fracture of a unidirectional ribbon-reinforced composite with an elastoplastic matrix under compression,” Prikl. Mekh., 26, No. 5, 3–8 (1990).
Yu. V. Kokhanenko, “Numerical solution of problems of the theory of elasticity and three-dimensional stability of piecewise-inhomogeneous media,” Prikl. Mekh., 22, No. 11, 46–54 (1986).
A. N. Guz' (ed.), The Statics of Materials, Vol 1 of the 12-volume series The Mechanics of Composites [in Russian], Naukova Dumka, Kiev (1993).
A. N. Guz, Fundamentals of the Three-Dimensional Theory of Stability of Deformable Bodies, Springer-Verlag Heilberg, Berlin (1999).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Guz', A.N., Dekret, V.A. & Kokhanenko, Y.V. Solution of Plane Problems of the Three-Dimensional Stability of a Ribbon-Reinforced Composite. International Applied Mechanics 36, 1317–1328 (2000). https://doi.org/10.1023/A:1009434116426
Issue Date:
DOI: https://doi.org/10.1023/A:1009434116426