Skip to main content
Log in

Microstructures of in situ Al/TiB2 MMCs prepared by a casting route

  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

In situ Al/TiB2 metal matrix composites (MMCs) have been successfully produced by Salt-Metal reactions. This is a novel low-cost reactive approach, which involves adding Ti and B bearing salts to molten Al. The reactions between the salts lead to the formation of the reinforcing TiB2 particles in the Al matrix. The in situ formed TiB2 particles are very fine (below ∼1 μ m in size). Strings and clusters of particle agglomerates are distinct microstructural features of all the composites with pure Al as the matrix. The effects of processing parameters on the kinetics of TiB2 formation and on the final microstructures are studied in detail. Besides, efforts are made to improve the distribution of TiB2 particles in the Al matrix by means of chemical additions; it is found that a homogeneous distribution is obtained by using a eutectic Al-Si alloy as the matrix material.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. P. Davies, J. L. F. Kellie and J. V. Wood, Key Engineering Materials 77-78I (1993) 357–362.

    Google Scholar 

  2. M. M. Guzowski et al., Metall. Trans. 18A (1987) 603–618.

    Google Scholar 

  3. J. Kellie and J. Wood, Mater. World January (1995) 10–12.

  4. C. F. Feng and L. Froyen, Materials Letters 32 (1997) 275–279.

    Google Scholar 

  5. R. Sasikumar and M. Kumar, Acta Metall. Mater. 39(11) (1991) 2503–2508.

    Google Scholar 

  6. L. Van vugt and L. Froyen, Microgravity Sci. Technol. X/2 (1997) 95–105.

    Google Scholar 

  7. I. Higashi, Y. Takahashi and T. Atoda, J. Crystal Growth 33 (1976) 207–211.

    Google Scholar 

  8. C. F. Feng and L. Froyen, Scripta Mater. 36(4) (1997) 467–473.

    Google Scholar 

  9. W. V. Youdelis, Metall. Sci. 9 (1975) 464–466.

    Google Scholar 

  10. Idem., ibid. 13 (1979) 540–543.

    Google Scholar 

  11. KURZ and D. J. Fisher, “Fundamentals of Solidification” (Trans. Tech. Publications Ltd., Switzerland, 1985) pp. 97–99.

    Google Scholar 

  12. E. L. Rooy, in “Metal Handbooks,” 9th ed., Vol. 15: Aluminium and Aluminium Alloys (ASM International, 1988) pp. 746.

    Google Scholar 

  13. G. Hu and M. Qian, “Physical Metallurgy” (Shanghai Press of Science and Technology, 1980) pp. 184–185 (in Chinese).

  14. T. Hikosaka et al., Casting Materials 61(11) (1989) 780–786 (in Japanese).

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Feng, C.F., Froyen, L. Microstructures of in situ Al/TiB2 MMCs prepared by a casting route. Journal of Materials Science 35, 837–850 (2000). https://doi.org/10.1023/A:1004729920354

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1004729920354

Keywords

Navigation