Concise Total Syntheses of (−)-Crinipellins A and B Enabled by a Controlled Cargill Rearrangement

Herein, we report concise total syntheses of diterpene natural products (−)-crinipellins A and B with a tetraquinane skeleton, three adjacent all-carbon quaternary centers, and multiple oxygenated and labile functional groups. Our synthesis features a convergent Kozikowski β-alkylation to unite two readily available building blocks with all the required carbon atoms, an intramolecular photochemical [2 + 2] cycloaddition to install three challenging and adjacent all-carbon quaternary centers and a 5–6–4–5 tetracyclic skeleton, and a controlled Cargill rearrangement to rearrange the 5–6–4–5 tetracyclic skeleton to the desired tetraquinane skeleton. These strategically enabling transformations allowed us to complete total syntheses of (−)-crinipellins A and B in 12 and 13 steps, respectively. The results of quantum chemical computations revealed that the Bronsted acid-catalyzed Cargill rearrangements likely involve stepwise paths to products and the AlR3-catalyzed Cargill rearrangements likely involve a concerted path with asynchronous alkyl shifting events to form the desired product.

C rinipellins A (1), B (2), and related natural congeners (cf.3-7) belong to the polyquinane diterpene natural products (Scheme 1A). 1 Crinipellins A and B were isolated by Steglich and co-workers from the fungus Crinipellis stipitaria (Agaricales). 2Since then, many other crinipellins were discovered. 3Structurally, the crinipellins feature a tetracyclic carbon skeleton with both a linear cis,anti,cis-triquinane (ABC rings) and an angular triquinane (BCD rings).Three adjacent all-carbon quaternary centers (C7, C10, and C11), eight stereogenic centers (for 1 and 2), and multiple oxygenated functional groups are embedded in their already highly congested tetracyclic ring system.In addition, the α-methylene ketone and the α,β-epoxide located in the A ring and the αhydroxy ketone in the C ring make crinipellins A and B labile and sensitive to various conditions.The biosynthetic pathway toward the crinipellins starts from geranylgeranyl pyrophosphate (GGPP, 8, Scheme 1B) via a series of cationic cyclizations (8 → 13, cyclase phase) to build their tetracyclic ring system followed by subsequent oxidase phase to decorate the core skeleton. 4Biologically, crinipellins A and B have demonstrated a broad spectrum of activities including antibacterial, anticancer, and fibrinolytic activities. 5he crinipellins have attracted plenty of synthetic attention due to their delicate and complex structures and promising biological activity (Scheme 1C). 6So far, four elegant total syntheses have been reported.In 1993, Piers and Renaud reported the first total synthesis of (±)-crinipellin B in 22 steps. 7Their synthesis started from 2-methylcyclopentenone 14 (D ring) and elegantly utilized a series of carbonyl chemistries to build the ABC ring system.In 2014, Lee and coworkers reported their total synthesis of (−)-crinipellin A in 32 steps from 14. 8 The key step is a remarkable tandem sequence of [3 + 2] cycloaddition, nitrogen extrusion, and radical cyclization (20 → 23) to build the BC ring system.In 2018, Yang and co-workers disclosed their total syntheses of (−)-crinipellins A (17 steps) and B (18 steps). 9Their synthesis used aromatic compound 24 as a starting material and features two Pauson−Khand reactions to build the CD (25 → 26) and AB (27 → 28) ring systems consecutively.In 2022, Ding and co-workers reported a divergent approach to access seven crinipellin congeners (14−18 steps) including crinipellins A (16 steps) and B (16 steps). 10Their synthesis features an oxidative dearomatization-induced [5 + 2]  cycloaddition to access 30, which was later rearranged to 32 with the crinipellin carbon skeleton via a hydrogen atom transfer initiated structural rearrangement (31 → 32).
The α-methylene ketone and α,β-epoxide moieties of crinipellins A and B render both of them potential protein covalent modifiers. 11With two electrophilic sites on the A ring, they may even serve as a bivalent lock to react on two different nucleophilic sites, such as cysteines of the same yet-to-bediscovered protein target.The resurgence of covalent inhibition 12 and our continued interest in this area 13 promoted us to embark on the total syntheses of crinipellins A and B to support follow-up biological evaluations including target identification.
Retrosynthetically, 33 was proposed as an advanced intermediate, which could be further oxidized to the crinipellins (Scheme 1D).We envisioned that 33 with the tetraquinane core could be derived from 34 with a 5−6−4−5 tetracyclic skeleton.To realize this transformation, a cut-andinsert skeletal editing 14 process is required to cut out the carbonyl group in the cyclohexanone and insert it into the cyclobutane ring.Specifically, we proposed a Cargill rearrangement 15 to convert 34 to 33.Mechanistically, our hope was that during the acid-promoted Cargill rearrangement, bond a could migrate first to form 35 with a bridged ring system, which would further rearrange to 33.On the other hand, bond b could migrate to give 36 with a tetracyclic and fused ring system, which would then rearrange to 37 with a bridged ring system.In most of the reported Cargill rearrangements, the four-membered ring is either a cyclobutene and/or in a propellane ring system, and the stereoelectronic effect and reaction conditions are important for controlling the selectivity. 15In our case with a cyclobutane fused with both a six-membered ring and a five-membered ring, there is no obvious tendency of which bond (a or b) would migrate first.In a related example reported by Pirrung (38 → 39), 16 under acidic (p-TsOH) conditions, 38 did rearrange but gave the undesired bridged product 39a as major (75%) and the desired angular triquinane product 39b as minor (15%).At the planning stage, how the rest of the ring system and substituents in 34 would affect the rearrangement was not clear, but if a set of complementary conditions to obtain either product could be developed and understood, it would expand the application of the Cargill rearrangement.This rearrangement strategy would allow us to use 34 as a key intermediate, which could be accessed from 40 with an intramolecular photochemical [2 +   2] cycloaddition, a reliable method to generate adjacent allcarbon quaternary centers. 17To assemble 40 efficiently, we proposed a formal β-alkylation of 41 with aldehyde 42 by using the method developed by Kozikowski. 18Compound 41 could be traced back to chiral pool molecule (S)-carvone (43) 19 and compound 42 could be synthesized from 44 via an asymmetric conjugate addition and amide reduction. 20ur synthesis started from (S)-carvone (43, Scheme 2).Its six-membered ring would serve as the expanded B-ring of the crinipellins, which later needs to be contracted to the corresponding five-membered ring.Selective α-allylation of 43 gave 45 in 79% yield.Subsequent ring closing metathesis forged the five-membered A ring.The trans ring junction was epimerized to cis with a one-pot DBU treatment to yield 41 in 85% yield.Aldehyde 42 was prepared from 4-phenyl-2oxazolidinone derivative 44.Copper-mediated asymmetric conjugate addition gave 46 in 86% yield.The auxiliary was removed via DIBAL-H reduction to afford 42 in 84% yield.With 41 and 42 in hand, we investigated Kozikowski's formal β-alkylation protocol to synthesize 40 with all the required carbon atoms.Enone 41 was first treated with PPh 3 and TBSOTf to form phosphonium intermediate 47 with a TBS enol ether.LDA was then added to form the corresponding ylide for the subsequent Wittig olefination with 42 to form 48 as a 6.2/1 mixture of E/Z isomers.The extended TBS enol ether was then hydrolyzed with further addition of HF•pyridine Scheme 2. Total Syntheses of (−)-Crinipellins A and B Journal of the American Chemical Society to the same reaction mixture.Overall, the one-pot Kozikowski protocol delivered 40 in 56% yield.Enone 40 was then subjected to the [2 + 2] cycloaddition via irradiation with a 370 nm lamp in cyclohexane at 80 °C.The [2 + 2] cycloaddition efficiently built three adjacent all-carbon quaternary centers and gave 34 as a single diastereomer in 91% yield.The existing 5,6-cis ring junction controlled the facial selectivity by allowing the terminal olefin to approach the enone from the less hindered convex face.
With 34 in hand, we started to investigate the key Cargill rearrangement (Table 1 and the Supporting Information).We first evaluated the p-TsOH conditions used by Pirrung (entry 1).While bridged product 37 was produced as the major product (45%), we were encouraged to see the formation of desired product 33 in 18% yield.Interestingly, adding LiCl inhibited both rearrangements, and 34 was recovered in 85% yield (entry 2).The use of Tf 2 NH gave 37 as the dominant product (51%) with 9% 33 (entry 3).We then switched to various Lewis acids.While Mg(ClO 4 ) 2 was not effective to promote the rearrangement, ZnCl 2 , ZnBr 2 , InCl 3 , BF 3 •Et 2 O, and AlCl 3 , all produced 37 as the major or only rearranged product (entries 4−9).When we switched from AlCl 3 to the less Lewis acidic Me 2 AlCl and EtAlCl 2 , the yield and ratio of desired product 33 increased significantly (entries 10−13).The use of Et 2 AlCl further increased the yield of 33, which also started to become the major product (entries 14 −17).Adding LiCl could slightly increase the selectivity, but reduced the overall yield slightly at the same time (entries 15 and 17).Notably, the reaction can be conducted on a gram scale to deliver the desired product 34 in modest yield.When the reaction was conducted on a gram scale, 34a, 34b, and 33a were the other isolable and identifiable byproducts.33a could be oxidized back to 33 with DMP to boost the overall yield of 33 from 43% to 54% (entry 18).
To complete the total synthesis (Scheme 2), Cargill rearrangement product 33 was first converted to epoxide 49 in 90% yield via a convex face m-CPBA epoxidation.Subsequent epoxide ring opening followed by DMP oxidation gave α-methylene ketone 50 in 93% yield over two steps.Both carbonyl groups of 50 were then converted to the corresponding TES enol ethers.Only the one in the A ring underwent Saegusa−Ito oxidation with Pd(OAc) 2 , and the other one remained intact because it was guarded by two allcarbon quaternary centers. 21Product 51 was obtained in 71% yield over two steps.Rubottom oxidation was next used to introduce the α-hydroxy ketone moiety in the C ring, and a 1.5/1 mixture of 52 and 53 was produced in 57% yield.Selective nucleophilic epoxidation of the more stained enone in the A ring of 53 completed a 12-step total synthesis of (−)-crinipellin A from (S)-carvone.For (−)-crinipellin B, after nucleophilic epoxidation of 52, an additional step was used to isomerize the α-hydroxy ketone in the C ring and produce (−)-crinipellin B in 13 steps.
To provide further insights into the mechanisms of the Cargill rearrangements, DFT calculations (SMD(toluene)-mPW1PW91/6-31+G(d,p)) were employed. 22Three systems were examined in detail (Figure 1): 34-H + (akin to entry 1 in Table 1), 34-Al(Me)Cl 2 (akin to entry 12), and 34-Al(Cl)Me 2 (akin to entry 10 and entry 14).All reactions were predicted to be exergonic and effectively irreversible, and all involved epoxonium ions as intermediates en route to 37 + -X.For 34 + -H, 2-step paths were found for formation of both 33 + -H and 37 + -H, making both of these reactions stepwise dyotropic rearrangements. 23Overall predicted free energy barriers differed by about 3 kcal/mol, with the formation of 37 favored, as observed experimentally.For 34 + -Al(Me)Cl 2 , formation of 37 + -Al(Me)Cl 2 was predicted to involve an epoxonium intermediate, but formation of 33 + -Al(Me)Cl 2 was predicted not to involve an intermediate, making this reaction a concerted dyotropic reaction (albeit involving asynchronous alkyl shifting events).22c,23 This difference from the Bronsted acid case may result from the increased donor ability of the oxygen, making it more likely to push the alkyl group to migrate to form 33 + -X.The predicted overall free energy barriers for formation of both products were similar (although favoring formation of 37 + -Al(Me)Cl 2 ), and both products were observed in comparable amounts experimentally (although CH 2 Cl 2 rather than toluene was used).For 34 + -Al(Cl)Me 2 , the formation of 33 + -Al(Cl)Me 2 was predicted to be favored by 1 kcal/mol over the formation of 37 + -Al(Cl)Me 2 .The predicted selectivity trend is in the same direction as that experimentally observed, but experimentally, 37 is slightly favored with Me 2 AlCl (entry 10) and 33 is slightly favored with Et 2 AlCl (entry 14).Et 2 AlCl works better than Me 2 AlCl presumably because of the further increased donor ability of the oxygen with Et 2 AlCl to push the alkyl group migration to form 33. While all of these results are in line with experiment, it is important to note that the observed selectivities correspond to small ΔΔG ‡ s, which fall within the expected error bars for DFT methods, such as the one used.That being said, our conclusions about intermediates are not expected to be sensitive to the level of theory used.
In summary, starting from cheap and abundant chiral pool molecule (S)-carvone, we completed total syntheses of (−)-crinipellins A and B in 12 and 13 steps, respectively.The key steps include a Kozikowski formal β-alkylation to bring together two readily available building blocks 41 and 42, an intramolecular photochemical [2 + 2] cycloaddition to install three challenging and adjacent all-carbon quaternary centers and a 5−6−4−5 tetracyclic skeleton, and a Cargill rearrangement to convert the 5−6−4−5 tetracyclic skeleton to the desired tetraquinane skeleton.The Cargill rearrangement is strategically important and allowed us to use the six-membered (S)-carvone as the B ring precursor, from which the A ring was installed via ring closing metathesis and the C ring precursor together with the D ring were constructed via the [2 + 2]cycloaddition.Notably, a set of conditions were developed to get either the bridged or fused product via the Cargill rearrangement.Computational studies indicated that both stepwise and concerted mechanisms are possible for these rearrangements, with unexpected epoxonium intervening in the formation of 37.

Table 1 .
Cargill Rearrangement OptimizationYield was determined by NMR analysis; b 43% isolated yield plus 11% from DMP oxidation of 33a.c ∼15% of 34a and 34b.Figure1.Computational results on mechanisms of the Cargill rearrangements. a