Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-16T03:32:07.669Z Has data issue: false hasContentIssue false
  • English
  • Français

Direct and external modulation of IF over fiber systems for 60 GHz wireless applications

Published online by Cambridge University Press:  16 April 2015

Ali Kabalan ,
Salim Faci ,
Anne-Laure Billabert ,
Frédérique Deshours  and
Catherine Algani
Ali Kabalan*
Affiliation:
ESYCOM, Le Conservatoire National des Arts et Métiers, 292, rue St-Martin, 75141 Paris Cedex 03, France
Salim Faci
Affiliation:
ESYCOM, Le Conservatoire National des Arts et Métiers, 292, rue St-Martin, 75141 Paris Cedex 03, France
Anne-Laure Billabert
Affiliation:
ESYCOM, Le Conservatoire National des Arts et Métiers, 292, rue St-Martin, 75141 Paris Cedex 03, France
Frédérique Deshours
Affiliation:
Laboratory of Electronic and Electromagnetism, Sorbonne Universités, UPMC Univ Paris 06, UR2, L2E, F-75005 Paris, France
Catherine Algani
Affiliation:
ESYCOM, Le Conservatoire National des Arts et Métiers, 292, rue St-Martin, 75141 Paris Cedex 03, France
*
Corresponding author: A. Kabalan, Email: ali.kabalan@cnam.fr
Get access Rights & Permissions [Opens in a new window]

Abstract

Wireless domestic applications involving high data rates are required to work on millimeter wave band. Signal propagation at this frequency range is affected by walls and oxygen absorption which limits communication distances to few meters in one room. Radio coverage can be extended to other rooms by optical links. Performances of such photonic systems are dependent on optoelectronic devices, electrical driving, and receiver circuits. In this paper, radio-over-fiber (RoF) links based on the intensity modulation and direct detection technique are investigated for transmission of a broadband OFDM signal. Direct and external modulations are exploited to analyze system performances according to the ultra wideband (UWB) millimeter-band standard. To avoid component tolerances at high frequencies, an intermediate frequency modulation of the optical transducers is chosen. Optoelectronic and optical components of RoF links are modeled by equivalent electrical circuits with consideration of noise and nonlinearities. These models are validated in system simulation by error vector magnitude evaluation with a measurement setup according to the UWB centimeter-band standard.

Keywords

Microwave photonicsModelingSimulation and characterizations of devices and circuits
Type
Research Paper
Information
International Journal of Microwave and Wireless Technologies , Volume 8 , Issue 3: Journee Nationale des Micro-ondes (JNM) 2015 , May 2016 , pp. 597 - 602
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Park, C.; Rappaport, T.S.: Short-range wireless communications for next-generation Networks: UWB, 60 GHz millimeter-wave WPAN, and ZigBee. IEEE Wireless Commun., 14 (2007), 70–78.CrossRefGoogle Scholar
[2]Collonge, S.; Zaharia, G.; El Zein, G.: Influence of the Human Activity on Wideband Characteristics of the 60 GHz Indoor Radio Channel. IEEE Trans. Wireless Commun., 3 (2004), 2396–2406.Google Scholar
[3]Guillory, J. et al. : A 60 GHz wireless home area network with radio over fiber repeaters. IEEE J. Lightwave Technol., 29 (2011), 2482–2488.Google Scholar
[4]Gomes, N.J. et al. : Radio-over-fiber transport for the support of wireless broadband services. J. Opt. Netw., 8 (2009), 471–487.Google Scholar
[5]Lecoche, F. et al. : Transmission quality measurement of two types of 60 GHz millimeter-wave generation and distribution system. J. Lightwave Technol., 27 (2009), 5469–5474.Google Scholar
[6]Galal, S.; Razavi, B.: 40-Gb/s amplifier and ESD protection circuit in 0.18-μm CMOS technology. IEEE J. Solid-State Circuits, 39 (2004), 2389–2396.Google Scholar
[7]Ido, T.; Sano, H.; Moss, D.J.; Tanaka, S.; Takai, A.: Strained InGaAs/InAlaAs MQW electroabsorption modulators with large bandwidth and low driving voltage. IEEE Photon. Technol. Lett., 6 (1994), 1207–1209.Google Scholar
[8]Kamisaka, T.; Kuri, T.; Kitayama, K.: Simultaneous modulation and fiber-optic transmission of 10 Gb/s baseband and 60 GHz band radio signals on a single wavelength. IEEE Trans. Microw. Theory Tech., 49 (2001), 2013–2017.Google Scholar
[9]Billabert, A-L. et al. : Simulation of microwave optical links and proof of noise figure lower than electrical losses. Int. J. Microw. Wireless Technol., 2 (2010), 497–503.Google Scholar
[10]Deshours, F.; Billabert, A-L.; Algani, C.; Blache, F.: A 40Gbps electro-absorption modulator integrated laser modeling method for optical transmitter in ultra-wide band radio-over-fiber systems. Int. J. Microw. Wireless Technol., 1 (2009), 511–519.Google Scholar
[11]Schmogrow, R. et al. : Error vector magnitude as a performance measure for advanced modulation formats. IEEE Photonics Technol. Lett., 24 (2012), 61–63.Google Scholar
[12]Kangbaek, K.; Dong-Soo, S.; Yong-Duck, C.; Kwang-Seong, C.; Jae-Sik, S.: Improving the noise figure of the 60-GHz radio-over-fiber system using a system-on-package EAM module with two-stage LNAs, in IEEE Int. Topical Meeting on Microwave Photonics, Victoria, 2007, 3–5.Google Scholar
[13]Maltsev, A.; Maslennikov, R.; Sevastyanov, A.; Lomayev, A.; Khoryaev, A.: Statistical channel model for 60 GHz WLAN systems in conference room environment. Antennas Propag. (EuCAP), 1 (2010), 12–16.Google Scholar
[14]Emami, S.: UWB Communication Systems: Conventional and 60 GHz, Principles, Design and Standards, Springer Science + Business Media, New York, 2013.Google Scholar