Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-25T11:47:55.388Z Has data issue: false hasContentIssue false

An interferometric study of the shock interaction at a compression corner

Published online by Cambridge University Press:  04 July 2016

L. C. Squire
Affiliation:
Cambridge University Engineering Department
P. J. Bryanston-Cross
Affiliation:
Cambridge University Engineering Department
X. Liu
Affiliation:
Cambridge University Engineering Department

Extract

This paper presents the results of an interferometric study of the shock/boundary-layer interaction at a compression corner. The boundary layer upstream of the corner is a non-equilibrium state having been disturbed by injection through a porous surface. As well as being relevant to the design of transpiration-cooled surfaces, the results show many similarities to the interaction in an adverse pressure gradient. The changes in the nature of the interaction as the approaching profile is distorted is fully explored and the results should provide a useful test case for computational fluid mechanics. The results are also used to evaluate the accuracy of interferometric techniques.

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1991 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Present address: Department of Mechanical Engineering, Warwick University.

**

Present address: Pratt & Whitney Canada, Mississanga, Ontario.

References

1. Squire, L. C. and Smith, M. J. Interaction of a shock wave with a boundary layer disturbed by injection. Aeronaut Q, 1980, 31, pp 85112.Google Scholar
2. Hayakawa, K. and Squire, L. C. The effect of the upstream boundary layer state on the shock interaction at a compression corner. J Fluid Mech, 1982, 122, pp 369394.Google Scholar
3. Bryanston-Cross, P. J. High speed flow visualization. Prog Aerosp Sci, 1986, 23, pp 85104.Google Scholar
4. Parker, R. J. Practical developments in holographic interferometry, Aeronaut J, 1990, 94, pp 9198.Google Scholar
5. Havener, A. G. and Radley, R. J. Turbulent boundary layer flow separation measurements using holographic interferometry. AIAA Paper No 73-664, 1973.Google Scholar
6. Vest, C. M. Holographic interferometry. John Wiley and Sons, New York/Chichester/Brisbane/Toronto, 1979.Google Scholar
7. Bryanston-Cross, P. J., Judge, T. and Towers, D. P. Analysis of holographic fringe data using a dual reference approach. Presented at the SPIE Optical and Optoelectronic Applies Science and Engineering Conference, August 1989. San Diego.Google Scholar
8. Bryanston-Cross, P. J. and Epstein, A. The application of sub-micron particle visualisation for Particle Image Velocimetry at transonic speeds. To be published in Prog Aerosp Sci. Google Scholar
9. Holmes, S. C. and Squire, L. C. A numerical study of supersonic flow over a compression corner with different incoming boundary layer profiles. AIAA paper-90-1453, 1990.Google Scholar