Elsevier

Procedia Engineering

Volume 195, 2017, Pages 220-227
Procedia Engineering

Experimental Testing Suitability of the Waste Glass into the Polymer Anchor Materials Based on Epoxy Resin

https://doi.org/10.1016/j.proeng.2017.04.547Get rights and content
Under a Creative Commons license
open access

Abstract

This article deals with the suitable use of waste glass in polymer anchor materials based on the epoxy resin. The research focused on the effect various waste glass had in different amounts on specific anchor-material properties. Various tests were conducted such as the specification of tensile properties, thermal resistance, monitoring the temperature during a polymerization process and a pull-out test. Test results assessment led to choosing a formulation that would yield the best quality of the polymer anchor.

Keywords

polymer anchor
epoxy resin
waste glass
pull-out test
glass transition temperature
tensile strength
microstructure

Cited by (0)

Peer-review under responsibility of the organizing committee of the 18th International Conference on Rehabilitation and Reconstruction of Buildings 2016.