Modelling of Holes Shaping at Drilling of Polymer Composite Materials

https://doi.org/10.1016/j.matpr.2019.01.035Get rights and content

Abstract

The article is dedicated to modeling of holes shaping at drilling of polymer composite materials that have the ability effectively to damp out the background noise accompanying work of turbine sets which nowadays are used in modern planes, in the pumping aggregates of gas-compressor stations. The most effective method of receiving of holes in polymer composite materials is diamond drilling at which material renting is carried out due to combination of processes of microcutting - shearing and fragile volume fracture. It’s developed the mathematical model for calculation of cutting rates at drilling of fiber-glass and carbon samples

References (12)

  • Yu. Novoselov et al.

    Analysis of Relation between Grinding Wheel Wear and Abrasive Grains Wear

    Procedia Engineering

    (2016)
  • F. Mett'yuz

    Kompozitnyye materialy

    (2004)
  • V. M. Iaroslavtsev, Tekhnologicheskie resheniia problem obrabotki raketnykh i aerokosmicheskikh konstruktsii iz...
  • A.A. Stepanov

    Obrabotka rezaniyem vysokoprochnykh kompozitsionnykh polimernykh materialov

    (1987)
  • V. M. Iaroslavtsev, Vysokoeffektivnyye tekhnologii obrabotki izdeliy iz kompozitsionnykh materialov [Nauka i...
  • Krister Rikh, Novyy vitok razvitiya obrabotki kompozitov, [METALWORKING WORLD. Delovoy i tekhnicheskiy zhurnal ot...
There are more references available in the full text version of this article.

Cited by (1)

View full text
© 2019 Elsevier Ltd. All rights reserved.