Advancements in the co-formulation of biologic therapeutics

Biologic therapeutics are the medicines of the future and are destined to transform the approaches by which the causes and symptoms of diseases are cured and alleviated. These approaches will be accelerated through the development of novel strategies that target multiple pharmacologically active sites using a combination of different biologics, or mixtures of biologics and small molecule therapeutics. However, for this potential to be realised, advancements in co-formulation strategies for biologic therapeutics must be established. This review describes the current and emerging developments within this field and highlights the challenges and potential solutions, that will pave-the-way towards their clinical translation.

biologics to tolerate greater physicochemical extremes, whilst maintaining or improving their therapeutic efficacy. Examples of such technologies include innovative microparticles and [8] nanoparticles [9], hydrogels [10] and 3D printing [11] that permit controlled and targeted delivery.
In general, most biologics are delivered via injection because large molecules are challenging to transport across skin, mucosa & cell membranes. Biologics are also rapidly hydrolysed if delivered into the GI tract [12]. Many vaccines [13] and antibodies [14] are delivered by intravenous infusion, requiring administration and monitoring within a clinic or hospital setting, which increases the associated costs of delivery incurred by healthcare systems. Similarly, intra-muscular injections also require administration by a skilled person. Subcutaneous injections require relatively lower skill for administration and can in many cases even be self-administered by patients. For these reasons, this has become a common and preferred method of delivery [15].
Although delivery by injection is the most convenient method for biologic delivery it is not always ideal. This is primarily because of the pharmacokinetics of biologics, which means they are rapidly cleared from systemic circulation [16]. Regulatory guidelines also limit the volume, and so subcutaneous injections require the biologic to be at a high concentration so that they can be delivered in sufficiently low volume via pre-filled syringe. This introduces new challenges associated with greater susceptibility to aggregation, and increased viscosity of injectables [17]. As a result, multiple doses of biologic injections may often be required, to achieve a concentration within the therapeutic window that produces maximum therapeutic benefit.
To overcome these challenges, enhanced formulations are being prepared that improve the methods by which biologics are delivered whilst augmenting their bioavailability [18]. For example, controlled sub-cutaneous infusion devices have been developed recently to enable larger volume dosage forms, although this may not be amenable to selfadministration [19]. Furthermore, 3D printing, a future manufacturing technology that is leading innovations for the pharmaceutical industry, has already been implemented to produce diagnostics [20,21], combination therapeutics for oral delivery [22] as well as implants [23]. These technologies could provide sustained release of therapeutics and be readily translated to co-formulating biologics to provide local target therapy or sustained systemic action [24].

Landscape of co-formulation
Co-formulation of therapeutics is an emerging strategy that aims to capitalise on advances in therapeutic effects observed through the coadministration of biologics [25]. It is important to first highlight that co-formulation is ambiguous terminology, and is often interchanged with co-administration, such that it can mean many different things from one individual to another. However, we have identified that the term combination therapy can be used to associate the main concepts of both co-formulation and co-administration, where the differences are highlighted by how and when the pharmaceuticals are delivered. Therefore, to clarify the terminology used in the field, a definitions map has for combination therapy has been produced. The landscape of definitions diagram for combination therapy (Fig. 1) demonstrates how terminology can be clearly differentiated, to classify the breadth of medicinal products that are administered together. This includes sequential administration, co-administration, combination products, and co-formulation, which are described in detail in this section.
Co-administered therapeutics are delivered at the same time, whereas sequentially administered therapeutics are dosed at intervals. Sequential administration is generally implemented to enhance therapeutic efficacy, the prevention of pharmacokinetic and pharmacodynamic drug-drug interactions [26] or where a first line therapy is supported by a second line therapy to enhance clinical outcomes [27]. Pharmacokinetic drug-drug interactions can be described when a therapeutic alters the absorption, distribution, metabolism and excretion of another therapeutic. Whereas pharmacodynamic drug interactions can be described as when therapeutics alter the way another therapeutic is able to directly exert its activity at target site or induce biological changes that indirectly modify its activity. Where there are no adverse pharmacokinetic or pharmacodynamic drug-drug interactions, rather a synergistic benefit, co-administration strategies are implemented.
Co-administration envelops several delivery strategies that vary in clinical, technical and regulatory challenge, and range from co-administration alone, to combination products and co-formulation. Coadministration alone can be described as the simultaneous delivery of two or more existing formulations. For example, this could include delivery of two or more of the same dosage forms (e.g. tablet and capsules) or a mixture of multiple formulation types (e.g. solid dosage forms, suspensions and injections). This is the most common form of combination therapy and is implemented widely as polypharmacy for individuals with co-morbidities or when individuals have an advanced stage disease that requires more than one therapeutic for effective disease management. The main challenge here is optimising clinical efficacy, as the technical and regulatory challenges having already been established for the individual drug therapeutic approval processes.
Combination products are technically challenging to produce and are engineered to simultaneously deliver two different therapeutics, that are typically of the same formulation type. Examples of innovations that best describe combination products include multi-barrel syringes [28] or infusion bags that dispense therapeutics via a single IV line. The advantages of this approach are not always clear, as therapeutics in existing formulations could be co-administered, which could overcome the dedication of resources to engineering technologies for a combination product. However, should the technology reduce adverse effects of combination therapy, whilst enhancing patient compliance and concordance and extending commercial rights for a product, there may be an incentive to consider this approach.
Co-formulation can be considered as the purist view of a combination therapy and can be described as consisting of more than one drug substance in a single formulation, with the intention of delivering multiple therapeutic agents at the same time for maximum therapeutic benefit. These products should be subject to the same clinical pharmacology studies for each of the individual new investigational drugs in the formulation as would be performed if the drugs were being developed independently [29]. This includes assessment of safety, bioavailability, characterization of pharmacokinetics, and as a result are the most challenging to produce and face many obstacles to obtain a product license in terms of demonstrable clinical efficacy, technological development and regulatory barriers. This is because a co-formulated product must not significantly impede clinical efficacy, such as pharmacokinetic and pharmacodynamic performance, or adversely affect product shelf life, whilst also demonstrating marked improvement over co-administered therapeutics. It is important to note from our definitions a biologic coformulation must consist of 2 or more drug substances, rather than a drug substance and another macromolecular entity such as an inactive protein, such as albumin. Albumin is classified as a pharmaceutical excipient and been implemented as a useful model to study co-formulation and advanced formulation strategies. [30,31]

Rationale for co-formulation
Co-formulated therapies are thought to effectively enhance clinical benefit, as well as extend intellectual property rights for pharmaceutical companies, to ensure long-term return on investment ( Table 1). The drive to co-formulate therapeutics has been predominantly conducted for small molecule drugs (< 500 MW) to control the symptoms of chronic respiratory, cardiovascular, neurological and infectious diseases. A few co-formulated biologic-based products that have been recently approved or are under clinical development suggests an increasing interest in industry to combine biologic therapeutic agents into a single dosage form ( Table 2). The application of these products include, but are not limited to, diabetes, where the drug substances are short-and long-acting insulin, [32] solid tumours, where 2-6 antibodies targeting same or different antigens were mixed [33,34], and blood diseases, where 25 antibodies were mixed for the treatment of primary immune thrombocytopenia [35]. Therapies have also been developed that use a combination of small molecules and macromolecular biologics [36] for the treatment of complex infectious diseases [36,37]. An example of a new biologic co-formualtion is HyQvia (immune globulin infusion 10% (human) with recombinant human hyaluronidase), a once-monthly treatment for adult patients with primary immunodeficiency. [38]

Clinical benefit
The clinical benefit of co-formulated biologics is derived from enhancements in therapeutic efficacy, or improved patient compliance and concordance. Therapeutic benefit can be enhanced by targeting multiple pharmacologically active sites synergistically to cure or alleviate the acute and chronic symptoms of disease.
This methodology has been applied to improve disease management for respiratory diseases, such as asthma and chronic obstructive pulmonary diseases (emphysema and chronic bronchitis), using small molecule-based APIs. Here, pharmacological therapy is introduced via inhalers to directly prevent acute symptoms, to improve peak respiratory flow, followed by long-term control, to prevent subsequent exacerbations. Combination therapy achieves this by combining overcoming the short falls of short-acting bronchodilators (e.g. salbutamol, terbutaline) with longer acting bronchodilators and corticosteroids. Long-acting bronchodilators are typically β 2 -receptor agonists (formoterol and salmeterol), which relax smooth muscle and dilate respiratory passages to improve airflow. Whereas long-term control is achieved through inhalation of corticosteroids (e.g. beclomethasone, budesonide, fluticasone), to improve respiratory airflow by supressing inflammation, oedema and secretion of obstruction mucus. Preparations that combine long-acting bronchodilators and corticosteroids include Salmeterol (salmeterol and fluticasone), Fostair (beclomethasone and formoterol), and Symbicort (formoterol and budesonide).

Synergistic benefit 6Cs
Synergistic benefit of co-formulation is enhanced through the 6Cs - The landscape of definitions diagram for combination therapy. The terminology clusters defined here can be used to group a variety of medicinal products that are administered together. This includes sequential administration, co-administration, combination products, co-formulation and medicinal devices.    Combination, Compliance, Concordance, Convenience, Carriage and Cure-all. Therapeutic efficacy can be maximised using complementary drug substances, where one drug substance improves the performance of another. An excellent example of combination therapy that implements this strategy is the antibiotic co-amoxiclav (Augmentin), which combines two small molecule APIs amoxicillin and clavulanic acid. [39] Amoxicillin is a semi-synthetic derivative of penicillin that exerts its pharmacological effect by preventing peptidoglycans from cross-linking effectively during the latter stages of bacterial cell-wall synthesis. However, bacteria have developed strategies to inactivate penicillinbased antibiotics by enzymatically degrading the β-lactam ring found in its chemical structure, through the secretion of β-lactamase enzymes. Therefore, to enhance therapeutic efficacy of penicillin-based antibiotics, the clavulanic acid in co-amoxiclav inhibits the action of βlactamases, to 'augment' the efficacy of amoxicillin.
In addition to these enhancements in therapeutic benefit and efficacy, patient care is also enriched through improvements in compliance and concordance. Compliance is improved through the elimination of complex therapeutic dosage regimens when more than one therapeutic is taken at the same time or at different times of the day. Furthermore, concordance is improved through effective transfer of information from the health care professional to the patient. For example, the healthcare professional only has to demonstrate the use of one inhaler, rather than two or more. Therefore, co-formulation is convenient for patient and healthcare provider alike. This convenience may also be true for the producer who only has to produce a single therapy, which in the longterm may be more economical in terms of manufacturing packing and carriage. It is important to mention carriage here to demonstrate the changes in global practices that are required to overcome accelerated climate change. Combined international efforts are required to slow and reverse increases in global temperatures, where co-formulated therapies can play a role.
Cure all, or panacea treatments, such as polyvalent vaccines are established examples of biologic co-formulations. Polyvalent vaccines prevent diseases with multiple serotypes, through the mixture of serotype-specific immunogens, or by discovery and use of an immunogen that is conserved among serotypes. For example, the poliovirus vaccine, which contains three poliovirus serotypes, was first used as a polyvalent vaccine for reducing poliomyelitis with a success > 99% [40]. However, polyvalent vaccines bring many challenges, [41] which include confirmation of physical, chemical, and immunological responses, as well as stability, for simultaneous administration of multiple antigens, in comparison to the individual antigens separately [42]. In response to the coronavirus pandemic research and development of polyvalent vaccine development has accelerated. This potentially could include coformulation of spike for proteins for severe acute respiratory syndrome coronavirus 1 & 2 (SARS-CoV, (2003) & SARS-CoV-2, (2019), respectively) [43], as well as other promising platforms which include mRNA, DNA, non-replicating vectors, replicating vector and virus-like particles. [44] The knowledge established through the development of polyvalent vaccines, will form the basis for the future of co-formulated biologics.

Clinical & regulatory challenges
As co-formulated therapeutics are classified as new pharmaceutical entities, the clinical evaluation of the therapeutic benefit becomes inherently more complex. This is because additional safety concerns could be raised for co-formulating existing pharmaceuticals, even though the efficacy and safety have already been established through independent clinical trials. Therefore, additional clinical trials will be required to provide further safety and efficacy characterization of the co-formulated product. The clinical trial of the combination is thus designed based on the previous safety and efficacy data of the individual component and the dosage of the components tends to be fixed. A Phase III, two-arm, multicentre and randomized study is likely to be conducted to establish the pharmacokinetics, efficacy and safety of the co-formulated product, which was observed in a recently approved co-formulated product [45].
The co-formulation of two new co-developed drugs, however, will be challenging when compared to the mixing of two existing drugs. The Food and Drug Administration (FDA) has published guidance for the codevelopment of two investigational new drugs, that highlights the difficulty in obtaining clinical safety and efficacy data for the co-developed drugs, in comparison to data that would be obtained if they were developed independently. Therefore, the FDA will request for preclinical evidence that demonstrates the superiority of the co-formualtion over the individual components, and the reasons why each component cannot be developed independently [29].

Technical challenges in therapeutic co-formulation of biologics
The development of co-formulated products has led to innovations in both their formulation and analysis, given the additional complexity, while many challenges remain. Non-native interactions, and the formation of heterogeneous aggregates, could be major obstacles when attempting to co-formulate two or multiple biologics for long term storage. In the formulation development of single-agent products, proteins are stabilised at the buffer and excipient concentrations that prevent undesired interactions between proteins. However, to mix different proteins in solution, a compromise formulation may be produced, such that each mixing component could be relatively destabilised compared to their independent formulations. This is especially true in formulations where proteins in the mixture have very different preferences for pH, excipient type and ionic strength. Moreover, it is challenging to predict whether a protein in each mixture will demonstrate the same stability and degradation kinetics compared to its monotherapy formulation.
These challenges are further complicated by considering the interaction between the protein and the excipients, as well as the change in viscosity at the higher combined total protein concentration. For example, if an anti-CTLA-4 antibody is formulated at 4.62 mg/mL and mixed with an anti-PD-L1 antibody of 1.54 mg/mL, the total protein concentration in solution for this anti-PD-1 antibody becomes 4.5 times higher [46]. Subcutaneous (SC) injection of biologics uses highly concentrated agents compared to intravenous (IV) infusion for administration. As a result, the concentration of protein agents in SC monotherapy formulation could increase from 10 mg/mL up to 150 mg/mL [47]. This concentration could double in a combination therapy when drug substances are mixed in a 1:1 ratio, such that the total protein concentration would need to be 300 mg/mL in the solution. It is important to note the overall concentration could be further increased if combined in 1:2 and 1:3 ratios.
This approach may significantly change the colloidal stability and protein-protein interactions of antibodies in solution that drives the mixture to heterogeneous aggregation. Moreover, the mixing ratio of the components may need to be varied to fulfil the specific dosage requirements of different patient groups. This further complicates the stability prediction of the product of different mixing profiles. Other factors, such as freeze-dry processing, agitation during transportation and temperature change in storage, will also potentially change the shelf-life of the co-formulated products relative to their respective monotherapies. These challenges also increase the burden on the analytics used to assess product degradation for the quality control of products.
For single-agent biologics, the stability, viscosity, aggregation, and fragmentation can be assessed using an established analytical toolkit. Aggregation, for example, can be analysed using a combination of sizeexclusion chromatography (SEC) or ultraperformance size-exclusion chromatography (UPSEC), and light scattering methods such as static and dynamic light scattering (SLS & DLS), to assess the monomer retention and the development of aggregation species in different formulations [48][49][50][51][52][53][54][55]. Similarly, the viscosity is easily assessed using rheometers, or flow rates through syringe needles at constant pressure [56,57]. The thermal stability of the product under different pH can be characterised using differential scanning calorimetry (DSC) or fluorimetry (DSF) [58][59][60][61]. Moreover, any structural alteration of the biologics in different formulations and their ligand binding can be quantitatively assessed by circular dichroism (CD) [62,63].
The quality assessment and control for co-formulated biologics raises additional challenges compared to single-agent products, as the analytics must accurately characterise multiple biologics in one solution. Therefore, it would also require additional sensitivity or resolution to deconvolute and distinguish the signal from each component, as well as their respective degradation products.
Current analytical tools demonstrate advantages and limitations when characterising the biological activity, molecular interaction, stability, aggregation and viscosity of proteins in co-formulations (Fig. 2). For example, SEC can characterise the respective monomer loss in the solution if the mixed proteins are not co-eluted. SEC with multi-angle light scattering (SEC-MALS) could further characterise the size of the oligomer species in the solution [64,65]. This is valuable information, especially for monitoring the development of early-forming aggregates. However, it is important to note SEC-MALS may not readily provide information on the identity of the aggregates. The idenitity of aggregates is beneficial to understand the formulation development and may provide insight to whether aggregates are are formed selectively from only one of the biologics, or through the co-aggregation of multiple biologic species in the solution. The degradation of antibodies results in the fragmentation of light chain and heavy chain domains, which could co-elute in SEC. Furthermore, if the combined proteins have similar hydrodynamic radii, then the SEC method would be unable to separate them and therefore would only measure the total monomer retention.
Additional chromatographic analytics, such as ion-exchange chromatography (IEC), reverse-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC), could then be explored in tandem, to separate the species that are co-eluted in SEC. RPLC has been widely used for the separation of antibodies and their fragments. Although RPLC exhibits limited selectivity for closely related proteins when compared to IEC, it has the advantage of producing sharp and highly resolved separation peaks. This can be attributed to the fastkinetic interactions in the reversed-phase mode. Therefore, RPLC could afford enhanced separations in antibodies mixtures. Similarly, HIC provides comparable separation to RPLC but is performed under nondenaturing conditions. It has been previously applied as a control strategy for bispecific antibodies and antibody-drug conjugates (ADC) [66]. However, as RPLC denatures the protein sample, it can measure the degree of fragmentation whereas HIC will not separate the fragmented heavy or light chains from the whole antibody. Therefore, HIC is less sensitive to map the entire degradation landscape of the proteins in mixture.
Capillary electrophoresis (CE) and imaged capillary isoelectric focusing (iCIEF), separate the mixed biologics based on their charge heterogeneity [67,68]. These methods can be used along with chromatography to map out the degradation species in solution. A recent study of a mixture of two antibodies tested the feasibility and limitations, of combining HPLC and CE in the analysis of co-formulated products [67]. It was previously suggested that mass spectrometry (MS) could be coupled to CE to characterise complex mixtures of antibodies [69]. This is because MS is capable of detecting weakly associated heterogeneous dimers in co-formulations. MS also adds sensitivity to characterise the molecular identity of different degradation products. However, none of these separation methods guarantees a non-overlapping separation of the co-formulated biologics and their degradation products. Whether these analytics fulfil the quality control requirement would be case specific. Therefore, it may be more promising to apply 2D chromatography which performs two separation methods (such as size-based and charge-based) in tandem to characterise the co-formulated system.
Labelling of proteins with fluorescent dyes provides an extremely sensitive insight into the dynamics and inter-molecular interactions of proteins in solution. Proteins are usually labelled on primary amines, disulphide linkages and glycosylation sites. Non-natural amino acid residues can also be introduced into the sequence to provide intrinsic fluorescence at desired sites. However, these labels could potentially change the behaviour of the protein, which is undesired for control strategy. Labelling on primary amines is difficult to control the sites being labelled. It is also postulated that the charge density of labelled proteins can be unfavourably altered. Maleimide chemistry could crosslink the disulphide bond in antibodies to introduce a chemical group into the protein. This was previously applied to introduce a fluorescent dye into a nanobody for imaging, and the development of novel antibody-drug conjugates [70]. However, it is challenging to predict whether the labelling site could report protein-protein interactions in the mixture, as disulphide bonds are usually buried within the protein structure. Nevertheless, it is still a very promising analytical tool to assess the formation of heterogeneous oligomers in the solution.
Labelling of carbohydrate molecules on the glycosylation sites of proteins may have the least influence on the protein structure. However, the distance to the labelled site could also be too far from the protein-protein interaction sites, such that it is not sensitive enough to probe any interaction events. Moreover, it also needs to account for the heterogeneous glycosylation ensembles of the antibody. Finally, the impact of labelling on the stability and degradation of the therapeutic proteins must be verified before this route is taken for analytics.

Future perspectives for co-formulation
Co-formulation provides a powerful methodology to combine multiple therapeutics for maximum synergistic benefit. However, this approach, and subsequent methodological innovation, will ultimately be driven by clinical need. This is because preparation of more than one therapeutic entity is a complex process and is associated with technical, analytical, and regulatory challenges, which may contribute to unsurmountable economical obstacles. Therefore, if the clinical benefit of the biologic co-formulation can be justified by the additional barriers, then co-formulation should ensue.
Strategies are emerging, alongside small molecule therapeutics coformulation, that could reduce the size of the obstacle through demonstration of promising proof of concept results. This can be achieved through the development of formulation technology, such as micro/ nano encapsulation and 3D printing, and of medicinal devices that take advantage of a variety of routes of administration, e.g. pulmonary, transdermal and oral delivery pathways.
Micro and nanoparticle-based formulations possess enhanced biophysical properties (large surface to volume ratio), are readily manipulated through chemical modification for targeted delivery [71], and are able to encapsulate a variety of different small and macromolecular structures. As a result, they could be excellent candidates to co-formulate biological medicines. Continuously manufactured poly (lactic-co-glycolic acid) (PLGA) nanoparticles have been shown to encapsulate two model proteins in the form of green and red fluorescently labelled bovine serum albumins (BSAs) [72]. Nanoparticles demonstrated high protein association and enhanced co-delivery of green and red model proteins to sub-cellular spaces, when compared non-formulated proteins. Disruptive technology, such as 3D printing, has demonstrated strong potential in the pharmaceutical industry, to produce personalised and co-formulated therapeutics [22]. Poly-pills have been produced for small molecule APIs, each for different co-morbidities and tailored to a bespoke dose to maximise patient compliance concordance. This formulation strategy could in-time be translated for biologics should they demonstrate appropriate pharmacokinetic and pharmacodynamic profiles.
Typically, biologics have been administered by intravenous injection, however formulation pathways that take advantage of alternate non-invasive delivery pathways, such as subcutaneous, transdermal, implants, inhalation, oral nasal and buccal routes delivery, are being developed and explored [12]. Intravenous administration affords immediate short-term solutions and advantages for the evaluation of therapeutic efficacy for co-formulated medicinal products to achieve clinical and regulatory approval. Although, non-invasive delivery methods possess research and development barriers, they present clear advantages in the long-term over intravenous therapy for patients, which include of ease administration, patient compliance and concordance [73]. This facilitates translation of biologic medicine away from clinics and hospitals, where specialist care is required, and into local healthcare practices, pharmacies, and homes.
This important transition is heavily highlighted in the literature methods to improve care for diabetic patients [74]. Co-formulated insulin-based therapies have been developed for administration via subcutaneous, transdermal [75] buccal [76] and inhalation pathways [77]. Non-invasive biologic therapies have seen the greatest success as coformulated subcutaneous insulin products, containing long and shortacting analogues [78] [79], that provide a wide treatment window to prevent repeated administration to the patient, and suggests reasons why non-invasive delivery pathways are extremely attractive to develop co-formulated medicines [80]. The latest developments in diabetes care include MultipepT1De microneedles. These microneedles use a mixture of co-formulated peptides from islet autoantigens to attenuate the autoimmune attack that is associated with the development of Type-1 diabetes [81].
Innovations in formulation and platform technologies that accelerate translation of co-formulated therapies from invasive to non-invasive modalities, especially for those therapies which have short circulation half-lives will be essential for long-term self-managed patient care outside of clinics. Examples of existing formulation innovations and platform technologies include preparations that include hyaluronidase and pharmaceutical implants. Hyaluronidase, like clavulanic acid, assists the drug substance to exert its therapeutic benefit effectively. Hyaluronidase achieves this by catalysing the degradation of hyaluronic acid in extracellular matrices to enhance the efficacy of subcutaneous administration. This formulation pathway has been used to co-formulate subcutaneous administration of the fixed-dose combination of two monoclonal antibodies, trastuzumab and pertuzumab, in combination with chemotherapy in HER2-positive early breast cancer [45]. Whereas implants, that are also positioned sub-cutaneously, consisting of biologics have begun to demonstrate their strong potential for their ease of application, owing to their sustained release properties, but also their ability to protect macromolecules against degradation [82].
The fast development of co-formulated antibody products, termed "antibody cocktail therapy", also demonstrates their potential in the treatment of viral infection. The rationale behind this is that multitargeting drug substances are applied to neutralize the virus by binding to non-overlapping epitopes to reduce the chances of viral resistance, which was successfully tested in the treatment of Ebola virus infection [83]. With respect to the COVID-19 global public health crisis, another co-formulated antibody cocktail was developed with potent binding to Venn Diagram highlighting the current analytical tools that can be applied to assess the quality control of co-formulated products. The analytics for either stability assessment or degradation product characterization are listed in blue or green circles, respectively. Analytical tools that can be applied to characterise both stability or degradation are presented in the overlapped zone. Abbreviations -DSC: differential scanning calorimetry; DSF: differential scanning fluorimetry; FI: fluorescence intensity; CD: circular dichroism; SLS: static light scattering; DLS: dynamic light scattering; RPLC: reverse-phase liquid chromatography; IEC: ion-exchange chromatography; SEC: size-exclusion chromatography; HIC: hydrophobic interaction chromatography; MS: mass spectrometry; SEC-MALS: size-exclusion chromatography multiple angle light scattering; CE: capillary electrophoresis; iCEF: imaged capillary isoelectric focusing. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.) the SARS-COV-2 spike protein [84]. Antibody co-formulation could become a powerful strategy to control future virus pandemics.
Co-formulation is an attractive therapeutic option to address multiple disease targets using two or more co-administrated pharmaceuticals. From the perspective of the manufacturer, this process also can have the benefit of extending intellectual property protection. However, it is important to note, there are competing technological solutions, other than co-formulation, that are being developed to effectively address multiple disease targets. Although beyond the scope of this review, bispecific antibodies [85], which can be classified as new therapeutic entities and require their own research and development programmes and regulatory approval, are an excellent example of another technology with the potential to bind and neutralize multiple targets in one or more diseases [86].
In summary, although there are many advantages proposed for coformulation therapies, their development and clinical uptake is a caseby-case debate, whereby the patient benefits are balanced against the technical and regulatory limits imposed by co-formulation.

Declaration of Conflict of Interest
The authors declare no conflict of interest.