Brief data overview of differently heat treated binder jet printed samples made from argon atomized alloy 625 powder

Powder bed binder jet printing (BJP) is an additive manufacturing method in which powder is deposited layer-by-layer and selectively joined in each layer with binder. The data presented here relates to the characterization of the as-received feedstock powder, BJP processing parameters, sample preparation and sintering profile (“Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625” (A. Mostafaei, Y. Behnamian, Y.L. Krimer, E.L. Stevens, J.L. Luo, M. Chmielus, 2016) [1], “Powder bed binder jet printed alloy 625: densification, microstructure and mechanical properties” (A. Mostafaei, E. Stevens, E. Hughes, S. Biery, C. Hilla, M. Chmielus, 2016) [2]). The data presented here relates to the characterization of the as-received feedstock powder, BJP processing parameters, sample preparation and sintering profile. Effect of post heat treatments including solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625 were compared to that of sintered samples.


Specifications
Images taken from M-Flex ExOne machine were captured at the Additive Manufacturing Center at the University of Pittsburgh. Characterizations of powder and BJP samples were conducted using a laser particle analyzer, a differential scanning calorimeter (DSC), a scanning electron microscope (SEM), X-ray diffraction patterns (XRD), and microhardness and tensile tests.

Data format
Analyzed Experimental factors An M-Flex ExOne powder bed binder jet printer was used to produce alloy 625 parts with the following printing parameters: layer height of 100 μm, recoat speed of 130 mm/s, oscillator speed of 2050 rpm, roller speed of 250 rpm, roller traverse speed of 15 mm/s, and drying speed of 17 mm/s.

Experimental features
After completing the printing process, the resulting semi-finished products ("green parts") were cured at 175°C in a JPW Design & Manufacturing furnace and then sintered in a Lindberg tube furnace in an alumina powder bed under vacuum with the following heating profile: heating at 5°C/min from RT to 600°C, 3.2°C/min to 1000°C, 2.8°C/min to the holding temperature (1200°C, 1240°C and 1280°C), holding for 4 h and then cooling at 1°C/min to 1200°C, 3.1°C/min to 500°C and finally to RT with a temperature stability of 1°C. Moreover, sintered sample with highest density were solution treated at 1150°C for 2 h, and then additionally aged at 745°C for 20 or 60 h [1,2]. Data source location

University of Pittsburgh, Pittsburgh, Pennsylvania, United States
Data accessibility Data is with the article

Value of the data
The printing parameters presented here may help to obtain the highest green part density of the BJP part of other nickel-based superalloys.
Other researchers can use the presented data as a guideline in printing, sintering and post heat treatment of the additive manufactured part.
Data allow one to ascertain process-property relationships for binder jet printed parts, providing a means to relate observed microstructural features with experimentally measured mechanical properties of the additively-manufactured samples.
The same procedure can be followed for other types of nickel-based superalloys.

Data
The presented data in this paper (see Figs. 1-7) can be divided into two parts: (1) characterization of the argon atomized powder, and (2) differently heat treated BJP alloy 625 samples in terms of microstructural observations using SEM, phase analysis using XRD, and mechanical testing including microhardness and tensile tests. The data included in this paper is based on experimental results provided in two publications from the authors [1,2].

Experimental design, materials and methods
Summary of the obtained data for the argon atomized alloy 625 powder are shown in Fig. 1. The presented data includes powder morphology data obtained using SEM (Fig. 1a-c), particle size distribution (Fig. 1d), DSC-TGA curves (Fig. 1e) and elemental analysis data (Fig. 1f).
The alloy 625 powder (Carpenter Technology Corporation) was spherical in shape as created via vacuum melted argon atomization method. The powder possessed a size distribution between 14 μm and 65 μm with the average particle size of 31 μm.    and aged): 105.7 mm long, 10.4 mm wide, 6 mm thick, gage length of 26 mm. Sintering and different heat treatments were conducted on the printed samples based on the parameters given in our previous studies [1,2].
The microstructure of the sintered and differently heat treated samples were observed using SEM working with an accelerating voltage of 20 kV as data shown in Fig. 4. Samples were cut using wire saw, mounted, polished and etched with a Kallings solution.
X-ray diffraction pattern was conducted to acquire data for phase formation after sintering and differently treatment conditions. X-ray diffraction (XRD) was performed on a PANanalytical EMPYREAN diffractometer with a Co Kα radiation source (λ ¼1.79 Å, 40 kV, 40 mA) and 2θ scans from 30°to 115°and collected data is shown in Fig. 5.
Microhardness measurement was conducted on Leco LM 800 instrument using 100 gf and 10 s dwell time on cross sections of the sintered, solution treated and aged samples and obtained data was presented in Fig. 6. Average of 10 data points were reported. Moreover, tensile test curves were Fig. 4. SEM micrographs taken from the cross-section of the BJP alloy 625 samples sintered at (a) 1200°C, (b) 1240°C, (c) 1280°C. The fully densified sample is then heat treated and cross sectional SEM micrographs are (d) solution treated at 1150°C for 2 h, (e) aged at 745°C for 20, (f) aged at 745°C for 60 h.  collected using an MTS 880 machine with rate controlled tensile test at 5 mm/min and obtained data are illustrated in Fig. 7.