Approaches for patterning of aluminum

https://doi.org/10.1016/S0167-9317(96)00034-2Get rights and content

Abstract

In semiconductor technology, aluminum is the preferred metallization. Sophisticated structures use a sandwich layer consisting of a TiW barrier layer, the aluminum itself, and on top (ARC, electromigration enhancement, adhesion layer). For the patterning of these sandwiches, dry etching (RIE — Reactive Ion Etching) methods based on chlorine and bromine chemistries are commonly used. Etching tools are standard parallel-plate reactors, Hexode-systems, MERIE-systems, and, recently, inductive-coupled plasma sources. In this paper the different chemistries including the new aluminum/iodine system are discussed, as well as the different etching equipment. New approaches try to substitute RIE by chemical mechanical polishing (CMP), also called ‘Damascene’. In this process sequence, the isolation oxide is deposited first, and the aluminum structure is etched into the oxide by RIE methods using a photoresist mask. After oxide etching and resist removal, the aluminum is filled in the structures and the residual aluminum is polished away by CMP. Finally, a second isolation layer is deposited. This paper will analyze this new approach and will compare it to the existing RIE methods.

References (66)

  • A. Weiss

    Plasma etching of aluminum: Review of process and equipment technology

    Semicond. Int.

    (1982)
  • R.F. Reichelderfer

    Single wafer plasma etching: 1. Al and alloys

    Solid State Technol.

    (1982)
  • D.W. Hess

    Plasma etch chemistries of aluminum and aluminum alloy films

  • L. Kammerdiner

    Aluminum plasma etch considerations for VLSI production

    Solid State Technol.

    (1981)
  • D.W. Hess

    Plasma etching of aluminum

    Solid State Technol.

    (1981)
  • H. Landis

    Integration of chemical-mechanical polishing into CMOS integrated circuit manufacturing

    Thin Solid Films

    (1992)
  • D. Sameith et al.

    Dry patterning of Al and Al alloys

    Cryst. Res. Technol.

    (1986)
  • A.G. Nagy et al.

    Chemical properties of polymer films formed during the etching of aluminum in CCl4 plasmas

    J. Electrochem. Soc.

    (1982)
  • M. Sato et al.

    The effects of mixing N2 in CCl4 on aluminum reactive ion etching

    J. Electrochem. Soc.

    (1982)
  • A. Cox et al.

    Plasma etching of silicon aluminum

  • K. Hirobe et al.

    Some problems in plasma etching of Al and AlSi alloy films

    J. Electrochem. Soc.

    (1981)
  • R.H. Bruce

    Frequency dependence of CCl4 etching

  • D.K. Ranadive et al.

    Aluminum plasma etching using carbon tetrachloride

  • K. Tokunaga et al.

    Aluminum etching in carbon tetrachloride plasmas

    J. Electrochem. Soc.

    (1980)
  • T. Hansen et al.

    Etchant for the reactive ion etch of metals

    IBM Techn. Discl. Bul.

    (1977)
  • R. d'Agostino et al.

    Plasma-assisted etching of aluminum in CCl4Cl2 mixtures

  • A.A. Chambers

    The application of reactive ion etching to the definition of patterns in AlSiCu alloy conductor layers and thick silicon oxide films

    Solid State Technol.

    (1983)
  • Y. Horiike et al.

    Aluminum reactive ion etching employing CCl4 + Cl2 Mixture

    Jap. J. Appl. Phys.

    (1982)
  • A.A. Chambers

    The reactive ion etching of AlSiCu alloy films

    Solid State Technol.

    (1982)
  • H.W. Lehmann et al.

    Reactive sputter etching of Al in BCl3

    Microelectron. Eng.

    (1983)
  • C.Y. Fu et al.

    Magnetron-enhanced reactive ion etching of Al(1%)Si(2%)Cu alloy

  • M. Sato et al.

    Radical generation mechanism and radical effect on aluminum anisotropic etching in SiCl4 reactive ion etching

    Jap. J. Appl. Phys.

    (1987)
  • M. Sato et al.

    The SiCl4 plasma analysis in reactive ion etching

  • Cited by (0)

    View full text