Influence of solvents on the structure of SiO2 gel from hydrolysis of tetramethylorthosilicate
Abstract
The effects of solvents on bulk density, specific surface area and pore size distribution of alkoxy-derived silica dry gel were investigated. Bulk densities of dry gel prepared using solvents of high dipole moment such as N,N-dimethylformamide (DMF), ethylene glycol (EG), formamide (FA) and ethyleneglycolmonomethylether (EGM) decreased with increasing amount of solvent. The specific surface area of the gels using EGM and EG increased monotonically with an increase of their content, whereas it decreased drastically by small addition and then increased when DMF or FA were used. These results were rationalized in terms of competition between the promotion of polymerization and the inhibition of coalescence among primary particles in the presence of organic solvent.
References (16)
- D.R. Ulrich
J. Non-Cryst. Solids
(1988) - M. Toki et al.
J. Non-Cryst. Solids
(1988) - T. Adachi et al.
J. Non-Cryst. Solids
(1988) - T. Adachi et al.
J. Non-Cryst. Solids
(1988) - G. Orcel et al.
J. Non-Cryst. Solids
(1986) - G. Orcel et al.
J. Non-Cryst. Solids
(1988) - G. Orcel et al.
J. Non-Cryst. Solids
(1988) - A.H. Boonstra et al.
J. Non-Cryst. Solids
(1989)
Cited by (24)
Controllable formation of Er<sup>3+</sup>-Yb<sup>3+</sup> codoped Al<inf>2</inf>O<inf>3</inf> films by the non-aqueous sol-gel method
2008, Thin Solid Films1 mol%Er3+–10 mol%Yb3+ codoped Al2O3 thin films have been prepared on thermally oxidized SiO2/Si(110) substrates by a dip-coating process in the non-aqueous sol–gel method from the hydrolysis of aluminum isopropoxide [Al(OC3H7)3] under isopropanol environment. Addition of N,N-dimethylformamide (DMF) as a drying control chemical additive (DCCA) into the sol suppresses formation of the cracks in the Er3+–Yb3+ codoped Al2O3 thin films when the rare-earth ion is doped with a high doping concentration. Homogeneous, smooth and crack-free Er3+–Yb3+ codoped Al2O3 thin films form at the conditions by a molar ratio of 1:1 for DMF:Al(OC3H7)3. A strong photoluminescence spectrum with a broadband extending from 1.400 to 1.700 µm centered at 1.533 µm is obtained for the Er3+–Yb3+ codoped Al2O3 thin films, which is unrelated to the addition of DMF. Controllable formation of the Er3+–Yb3+ codoped Al2O3 thin films may be explained by the fact that the DMF assisted the deprotonation process of Al–OH at the surfaces of gel particles, resulting in enhancement of the degree of polymerization of sols and improvement of the mechanical properties of gel thin films.
Nanoporous dielectric films: Fundamental property relations and microelectronics applications
2003, Interlayer Dielectrics for Semiconductor TechnologiesThis chapter deals with porous materials that are proposed to replace dense SiO2 as the interlayer dielectric in future microelectronic devices. The properties of any porous material depend upon the material's microstructure and process history. For a fully connected material, the elastic modulus varies with the square of the density and thermal conductivity, like the dielectric constant, which vary linearly with density. Any defects in the structure of the material tend to increase the dependence of the property of interest on the density or porosity. The adhesion between layers, the stability of a layer deposited on a porous material, and inter diffusion between layers depend upon the porosity of the material and the intermolecular forces governing the strength of the interaction between the layers. Adhesion also depends upon intrinsic stresses in the layers and the ambient environment. Adhesion and stability of Cu films are better on xerogel films compared with solid SiO2. Cu may diffuse into porous materials under electrical bias. Diffusion depends upon the surface chemistry of the material and its porosity. Leakage currents and C–V curve shifts are larger with an Al electrode than with a Cu electrode for silica xerogel-based capacitor structures. When the organic capping groups are removed from the xerogel prior to metal deposition, C–V tests indicates Cu ion diffusion at temperatures as low as 100°C. A model of diffusion through porous solids successfully simulates the current observed during BTS testing of silica xerogels and may extend to be applied to the polymers.
Porous silica materials as low-k dielectrics for electronic and optical interconnects
2001, Thin Solid FilmsThe need to decrease signal delay and cross-talk in interconnects within integrated circuits is becoming increasingly important as device dimensions shrink. Electrical connections require lower resistivity metals and lower dielectric constant insulating films to meet future goals. Even these materials may not provide for sufficient signal bandwidth, and so optical interconnections are also envisioned. Porous materials offer the opportunity to fabricate scaleable dielectric constant materials for both electrical and optical interconnections. At Rensselaer, we have been working on projects using porous silica materials (xerogels) as low-k dielectrics for electrical interconnections and as low refractive index ‘cladding’ materials for optical interconnections. This paper focuses on the relationship between the porosity of the material and its optical, electrical, interfacial and mechanical properties. We find porosity has profound effects on the adhesion and stability of thin metal or dielectric films deposited on porous materials. In some instances, such as copper, porosity actually enhances the stability of the film. In others, such as silicon dioxide or tantalum, small changes in porosity lead to buckling or delamination of the film. The interfacial properties also affect the diffusion of metals into these films. The leakage current of copper into porous silica films is an order of magnitude or more less than that through solid SiO2. This may be the result of surface passivation processes used to make the materials hydrophobic. The elastic modulus of the films varies as a power law with density in accordance with the prediction for open-cell foam materials. Finally, the optical properties of waveguides formed using porous silica claddings are discussed. Core/cladding refractive index differences of 0.6 or more are possible for compact optical waveguide interconnects. Low refractive index, space-filling porous materials may also find uses in photonic crystal applications.
The Sintering and crystallization of colloidal silica gel
2000, Materials LettersThe isothermal kinetics of crystallization of cristobalite from silica gel at different sintering temperatures were investigated using quantitative X-ray diffraction (XRD) method. The xerogel crystallized to cristobalite and started at the surface of the glass body during sintering at 1100°C in a He atmosphere. If the xerogel was treated with CCl4, the nucleation and growth processes determined the crystallization during sintering to be above 1250°C. The hydroxyl contents of the specimens were about 50 ppm from calculations base on transmittance data. The activation energy for nucleation and growth is 570 kJ/mole and the constant of the Avrami equation is about 1.51. The sintering temperatures for obtaining a higher density were influenced by the bulk densities of the xerogel. The xerogel obtained by twice dispersion gives a bulk density of 0.7 g/cm3 and can be densified by sintering at 1180°C for 4 h in a He/O2 atmosphere; however, the xerogel with bulk density of 0.6 g/cm3, obtained by adding 5 mol% N,N-dimethyl formamide as the drying control additive can be densified to glass by sintering at 1250°C for 4 h in a He/O2 atmosphere.
Preparation of silica gels in electrostatic field
2000, Materials Research BulletinThe investigation is focused on the pore distribution and morphology of the gels prepared under electrostatic fields from hydrochloric acid-catalyzed TEOS (tetraethyl orthosilicate) systems (acetone as solvent). Hydrochloric acid of 1.0 and 0.6 M, and electrostatic field of 3kV/52mm and 3kV/8mm were adopted. The sols were put in electrostatic fields after certain minutes of stirring, and the acquired wet gels were moved away for aging when gelation finished. After aging in sealed containers for a week, they were dried in ambient condition, and additionally some of them were calcinated at 600°C after drying. SEM analyses showed that these xerogels had variant pore distribution or distinct morphological characteristics, which were related to the direction of electric field and could be attributed to the influence of electrostatic field on the redistribution of colloidal particles and water, and that xerogels with gradient pore distribution might be expected if proper parameters were adopted.
Influence of N,N-dimethylformamide additive on the physical properties of citric acid catalyzed TEOS silica aerogels
1999, Materials Chemistry and PhysicsThe use of N,N-dimethylformamide (DMF) as a drying control chemical additive (DCCA) was found to be effective in order to obtain the best quality tetraethoxysilane (TEOS) silica aerogels in terms of monolithicity, transparency and low density. Silica sols were prepared by keeping the molar ratio of TEOS : ethanol (EtOH) : water (0.001 M citric acid as a catalyst) constant at 1:5:7 respectively, while the DMF/TEOS molar ratio (A) was varied from 0 to 1. The DCCA modified silica alcogels were dried supercritically. It has been found that the bulk density, linear shrinkage and surface area decreased with an increase in A values. On the other hand, the percent porosity has been found to increase with increase in A values. Moreover, it has been observed that percent optical transmission increases up to A=0.3 and then remains almost constant up to A=0.7 and for A>0.7, per cent optical transmission decreases. It has been found that for A values between 0.3 and 0.7, the pore size distribution is narrow and uniform which reduces the differential pressure during supercritical solvent extraction process and leading to monolithic, transparent and low density silica aerogels. The results have been supported by the scanning electron microscopic observations of the aerogels.